OpenSUSE :: Application Configuration Via Tightvnc Session?
Jun 9, 2011
I connect from computer A (OSS11.4) to computer B (OSS11.3) via tightvncviewer. Install google talk plugin using user X account on computer B. Test video call using tightvnc and another laptop C (winXP) - seems to work (see video on both C and B (via A tightvnc)). User X tries to use google talk on Computer B with no success, no video, no audio (could be config problem).Then I ask myself and others, how is this possible, or actually how to fix it.
View 2 Replies
ADVERTISEMENT
Jun 6, 2011
I want to configure my tightvnc server installation to use my already running X session (on current :0 screen), but as i understand its not really and its working only at another screen. How can I configure to use it on my current screen?
View 2 Replies
View Related
Feb 8, 2011
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
View 1 Replies
View Related
Nov 28, 2010
i wonder if you can modify KDE so that users can only log in once with one session.Currently, with KDE 4.5, i have the problem that user can log in several times and then ending up with an application used in a different session which means that you can not use it in the other session.
View 2 Replies
View Related
Mar 17, 2010
I am trying to run VNC server on a standard OpenSUSE 11.2 Gnome Desktop installation.I have done this succesfully with SLES for sometime, however, my experience with OpenSUSE 11.2 is that it doesn't work out of the box!!
I am using XP Pro VNC viewer Free Edition 4.1.2 to connect.
I have removed "localhost" from the # special IPv6 addresses in hosts. This fixes the black screen issue for me. All appears well until I disconnect and retry the connection after 5 minutes or so. Then VNC client makes the connection and then immediately disconnects. It's a no go from then on. If I reboot OpenSUSE 11.2 it works again but then reconnect fails again after the same period of time.
I am trying NX now as an alternative. However, I would much prefer to use VNC.
View 9 Replies
View Related
Oct 12, 2010
I have a problem with tightvnc, when I set up a dinamic ip with networkmanager it works fine but if I set up a static address connection it display an error "You have been unexpectedly disconnected from 'hometsa-comp'. Would you like to reconnect?"
"Couldn't convert 'hometsa-comp' to host address" I have setup the ip address, netmask, gateway and dns server in the network manager static address, it works when I setup the vnc connection using ip address instead of hostnames.
View 9 Replies
View Related
Apr 21, 2011
I use opensuse 11.4 with TightVNC Server version 1.3.9. I use french keyboard mapping (yast configuration).When I connect with putty via ssh all is ok (keyboard mapping). But when I use tightvnc viewer on windows the mapping is not correct.I've verified many time the configuration of the keyboard in yast (graphical) and desktop options (french mapping). I can't map correctly. It seem there is no issue with direct attached keyboard.Another strange behavior is the shift key. I want to use . (need to press shift + and this put a >. But sometime if I press "shift + ," before then "shift + ;" it works.
I've passed long time on google and find no answer yet.Is there a issue with tightvnc server ?A bug with tightvnc viewer ? (I've tried with realvnc and same results).
View 1 Replies
View Related
Jun 13, 2011
I recently installed opensuse 11.4 having come from 11.1 and when I started configuring VNC it appears that tightvnc is installed by default. I enabled remote administration and open firewall ports in YAST and found that the tightvnc viewer connects to my server ok. I do have a couple problems though;1. the password I set up when manually launching vncserver for the first time is not requested.2. When I launch a viewer connection it appears that an existing session is not being connected to since I log in as a user through the typical suse login screen and when I exit the session, all terminals and apps launched during that session are ended. On my 11.1 installation, after exiting a session all work was persistent and not ended.
View 1 Replies
View Related
Nov 17, 2010
I am running 11.3 with Remote Admin(VNC) turned on. This has installed TightVNC.I also have also enabled xinetd to manage the startup of new (incoming) VNC requests.All this is working just fine. So, what's the problem, you ask? Its that missing Shift+3 symbol. To reproduce, I run TightVNC (viewer) from a variety of clients (Win & OpenSUSE) to a number of OpenSUSE servers with xinetd managed VNC services enabled. The Xvnc sessions start and the clients display the KDE log-on screen. You will notice that in the username field that the sign is not displayed.
I have run a parallel VNC service (is it Xvnc or vncserver?) which gave me a twm session. It also is missing thesign, so I conclude that it is not KDE that is causing the problem?Secondly, a scan throughog file produced by the parallel VNC service shows:Code:KbdAddEvent: unknown KeySym 0x3a - allocating KeyCode 92 Has anyone any suggestions on how I can get my pound sign?
View 5 Replies
View Related
Jan 5, 2011
How to start an X server as root with a session of non-root application?Should be something like xinit 'su -c openbox user
View 2 Replies
View Related
Feb 4, 2009
I frequently access my home computer throughout the day in two ways: either locally, or remotely using nxserver/nxclient. As one user, I have two concurrent X-windows sessions running, possibly with different applications running in each. Is it possible to move a running application from one session to the other? That is, I want all the active windows related to the app to disappear from one desktop,
View 4 Replies
View Related
Sep 14, 2010
I want to run X window graphical application over ssh session on my server running Centos 5.5 . i used the -X flag for ssh (ssh -X user@serverip). i checked the /etc/ssh/sshd_config file on the server and i have the line "X11Forwarding yes". but i can not run any X applicaton. when i use root account i get the message: xauth: creating new authority file /root/.serverauth.15813
[Code]...
View 3 Replies
View Related
Jan 14, 2011
after the upgrade to maverick, gnome-session-save doesn't save applications on shutdown or logout as it did on Lucid.I've noticed the following things:
On Lucid, if I had a stopped job in a shell, the system refused to logout or shutdown, showing a confirmation window. On Maverick, the CPU goes to 100% and then the computer shuts down; on reboot, no application is saved
On Maverick, if there are NO stopped jobs in a shell, I can logout cleanly but only a few applications are saved (eg. terminal, firefox) but others aren't (eg. empathy,evolution) I've checked "Automatically remember application on exit" in "Session management" menu.
View 3 Replies
View Related
Apr 11, 2010
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
View 9 Replies
View Related
Jan 31, 2010
I've downloaded VideoLan (VLC) via Yast but the icon was placed in the audio folder. How do I move it to the video player folder? Also, where are additional icons stored? I run SuSE 11.2 (boxed version) with KDE.
View 9 Replies
View Related
Aug 18, 2015
I bought a hp envy x360, and I have installed debian 8.1 and I have some problems with GNOME.
I am running session and it works fine, but after some time it is closed suddenly and after I can't start session.
View 0 Replies
View Related
Apr 10, 2010
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 6 Replies
View Related
Oct 25, 2010
i installed oroborus and rox-filer and did not see an entry for either in gdm3's session chooser. i have used these window managers together before and was always able to select the session from gdm. i thought i might have to add an oroborus.desktop file to /usr/share/xsessions, but only found one in /usr/share/kde4/apps/kdm/sessions and it didn't show up when i copied it to /usr/share/xsessions. how can i get oroborus into gdm3's session chooser?
View 1 Replies
View Related
Aug 9, 2010
I was just wondering if there was a package out there to remove all obsolete program configuration files?
View 4 Replies
View Related
Mar 19, 2010
can any tell me how can I configure OpenSuse for login session (kde/gnome) using a certificate in a SmartCart (spanish DNIe).
View 5 Replies
View Related
Mar 8, 2010
is there a way to allow a program mounting a drive without requiring it to ask for sudo password (apart from running it with sudo)? To be more specific, I'm annoyed by the sudo password request by TrueCrypt whenever it needs to mount a volume.
I've thought about creating another user, allowing it to mount volumes and then running TrueCrypt as this user at boot. I don't know whether GNU/Linux allows for such policies... maybe I should look into SELinux?
EDIT: For the issue at hand (encrypted USB stick both on Windows and Linux), I'm investigating FreeOTFE. I'm still curious about the privileges issue, anyway.
View 3 Replies
View Related
Feb 15, 2009
I want to run snort through a web application with exec("snort -v -i eth0 ") php function.for example when start button was pressed snort should be run,but the execution failed with this error:but when I run snort command via command line as root it will execute successfully.I think this problem is for that apache user haven't access to network adapter, is my guess correct? I have no experience with apache, should I change apache configuration? what is the configuration for this problem.I think I should find a way to allow apache to access but I don't know how?
View 2 Replies
View Related
Mar 2, 2011
I am using Ubuntu 10.10 netbook edition.
I have already downloaded the tightvnc-1.3.10_unixsrc.tar.bz2 , the source code for VNC. But I dont know how to install it.
View 6 Replies
View Related
May 14, 2010
i have read the readme and documentation pages on the website numerious times and i still don't understand. how do i connect to a server to view it and how do i set up the linux computer as a server to connect to it and control it (from a windows computer if possible) and how do i install this software from the tarballs that can be downloaded from the tightvnc website
View 9 Replies
View Related
Feb 2, 2010
I need to get TightVNC installed on RHEL 5.
I downloaded and extracted tightvnc-1.3-.10_unixsrc.tar.bz2. I have directory called vnc_unixsrc. I went into this directory and tried running xmkmf but got the kick back saying command not found. After doing some searching around looks like i need imake. So I ran yum install imake, installed imake. went back to my vnc_unixsrc directory and tried runnign xmkmf again (failed) did some more searching and looks like people recommended I reference the path to xmkmf. So, while I was in vnc_unixsrc I tried /usr/bin/xmkmf and I get:
This doesn't look right.... Lost here... should I try to execute make World next? or I do still need to figure out xmkmf first...
View 4 Replies
View Related
Apr 6, 2010
when i start my pc i have an error: Consolekit session error, unknown return code 0 when i click Ok it then starts my session
View 7 Replies
View Related
Mar 23, 2011
is there a way to give an application (controlaula) write access to a folder /var/lib/monitorprofe and files on that folder.
View 3 Replies
View Related
Jan 9, 2011
Just installed fedora 14 and do not have a printer config app. Im not sure what packages should be installed. I just came back to linux after years off. Lots different from redhat 6.
View 9 Replies
View Related
Dec 24, 2009
I'm accustomed to using the tightvnc client to view servers running vnc. Since installing Fedora, I see that it uses Tigervnc for everything, and there is no tightvnc client available. Normally, this wouldn't be a problem, especially since Tigervnc seems more functional. The problem I'm having is that there are "artifacts" when using tigervnc to connect to one of my servers. It's so bad, that I can hardly use it to view that server. I've tried to change some of the options in tigervnc, but the app just crashes when I try to save the changes.
Anyone else experience this problem with tightvnc? Anyone tried installing one of the old tightvnc packages from rpmfind.net or rpm.pbone.net?
View 11 Replies
View Related
Apr 12, 2010
hypothetically speaking, can i write a script in which a telnet session is opened and then some more commands are forwarded to that session?
View 4 Replies
View Related