OpenSUSE Install :: 11.1 - Yast2 Software Management Not Working After Update

Jan 9, 2010

I did a fresh installation of openSUSE 11.1 i586. Everything worked fine. Then I used YaST2 Software Management to add a package. Worked fine. Then I did the Online Update to get the Installation up to date. Worked fine so far. I had to restart the Machine because of the Kernel Bugfix Update. Since then, the YaST2 Software Management is not working any more.

When I do start it, it starts the software manager, shows the "Search Phrase" and so on but when I enter a word and press "RETURN" the software manager immediately closes and takes me back to the YaST2 start screen. No messages, no warnings, nothing. With zypper I am able to install software but no longer within YaST2.

View 9 Replies


ADVERTISEMENT

OpenSUSE :: Yast2 Software Management - Fails To Connect To Repositories

Nov 1, 2010

Annoying problems I have with Yast2 Software Management?

1. Sometimes when starting Yast2 Software Management it fails to connect to the SW repositories. It happens inevitably (i.e. without exception) at the first attempt after a fresh boot up, and sometimes otherwise. I can only retry or abort, and retrying usually brings no success anyway. Is it perhaps due to a time-out somewhere?

2. If I click on the 'abort' button (see above) or 'cancel' in Yast otherwise, I inevitably (i.e. without exception) get the following type of error message
Code:
** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed

** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed

** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed

** (<unknown>:4220): CRITICAL **: giop_thread_request_push: assertion `tdata != NULL' failed
(sometimes only 2 identical lines of error code)

I am running OpenSuse 11.3 with Gnome.

View 9 Replies View Related

OpenSUSE Install :: YaST2 Update Conflicts And Inferior Architecture

Jan 22, 2011

When I ran YaST | Software Management | Package | Update if newer Package Available this morning I get this message:

Code:
#### YaST2 conflicts list - generated 2011-01-22 09:40:42 ####
libxine1-codecs-1.1.19-2.pm.48.15.i586 requires libpostproc.so.51, but this requirement cannot be provided
uninstallable providers: libpostproc51-0.6.26387svn-1.pm.2.1.i586[ftp.uni-erlangen.de-suse]
[ ] break libxine1-codecs by ignoring some of its dependencies
[ ] Following actions will be done:
install libpostproc51-0.6.26387svn-1.pm.2.1.i586 despite the inferior architecture .....
[ ] do not install libxine1-codecs-1.1.19-2.pm.48.15.i586
#### YaST2 conflicts list END ###

What is it telling me? What should I do? What are the implications?

View 2 Replies View Related

OpenSUSE Install :: Update Fails - Loop - Flash Player - Yast2-core

Aug 27, 2011

I am trying to update Flash-player and yast2-core as prompted by today's update icon.

I am now faced with a loop that goes like this:
1) click on icon
2) window pops up, "2 packages selected"
3) click on apply, subwindow pops up
4) click on continue, "waiting for authentication"
5) after minutes of waiting, click on cancel, nothing happens
6) click on icon killing subwindow
7) now back to 2)

Aborting the process, starting at 1) again, same mess

Conclusions:
a) No idea what was going on

b) Use Yast instead of clicking update icon

View 2 Replies View Related

OpenSUSE :: Yast2 Update - Dependency

Apr 4, 2011

For the past several days I have been getting a notice to update but then when I try to, get the following notice of a dependency problem:

I am running 11.4_64 with KDE 4.6.1 update. How do I clear this?

View 9 Replies View Related

OpenSUSE :: Yast2 Control Center Broken After Update?

Mar 4, 2010

About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.

Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):

terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct NULL not valid
YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20
/sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".

[Code]....

View 2 Replies View Related

OpenSUSE :: Yast2, Firefox, Thunderbird Don't Work After Update?

Nov 22, 2010

Some time ago I did an automatic update and after that firefox, thunderbird and yast2 don't start. It's not that there is an error message or sth. Their icons just start jumping and after a while it stops without anything opened. I tried even removing the zilla directories and so on but it doesn't help. Of course I tried to simply reboot the machine and strangely enough, still does not work. Opera works though and I am ok with that, however yast2 not opening is more annoying. I do all the stuff that I want from the console, but of course that's not the point

View 3 Replies View Related

OpenSUSE :: Yast2 Control Center Update Failed

Aug 18, 2011

This is the error message I got today when updating.
patch:yast2-control-center-4200.noarch conflicts with yast2-control-center-qt.i586 < 2.20.2-1.3.1 provided by yast2-control-center-qt-2.19.3-6.1.i586

View 4 Replies View Related

OpenSUSE :: Yast2 Not Working On Clean Minimal Server Config With XEN?

Mar 16, 2011

I have unexpected problem with yast2 in xen kernel!

My system is
MB Asus p8h67-m evo
CPU Intel i7 2600k cpu
RAM DDR2 8gb

Ive install clean minimal server config (11.3 x64), make all updates from yast2, than reboot, than from yast2 start installation of XEN (in Virtualization, not in software management), reboot, set Xen dom0 to boot and than, after login, starting yast2 and got on blue screen with text "Loading modules,

sbin/yast2: line 399: 5427 Illegal instruction $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
and return to promt

[Code]...

View 9 Replies View Related

OpenSUSE :: Management - Update - Install Or Remove A Package - Subprocess Failed. Error: RPM Failed: Rpmdb: PANIC: Invalid Argument

Apr 9, 2010

Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.

[Code]....

View 4 Replies View Related

OpenSUSE Network :: Internet Working - Package Management Not Working

Dec 17, 2010

I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?

View 3 Replies View Related

OpenSUSE :: YaST2 Failing To Install RPMs?

Oct 6, 2010

I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.

View 9 Replies View Related

OpenSUSE :: Can't Install LXDE/YaST2 Isn't Responding

Jul 3, 2011

Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.

So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.

View 9 Replies View Related

OpenSUSE Install :: Yast2 Does Not Work After Some Time Using VNC

Dec 5, 2009

I have problems with running Yast2 under Gnome when I connect via VNC to the computer. The first 20-30 times it worked, but then it simply stopped to work. When switching to another VNC-Server (instead of :1 to :2) it works again for approx. 20-30 times. The behaviour is very much similar to the one described here:

Yast2 startet nicht unter VNC (SUSE 11.1/Gnome)

I use OpenSUSE 11.2 with german language set. The VNC server I use the one that is installed "by default".

When I try to run Yast2 from a terminal under Gnome as normal user I get the following output:

./yast2: Zeile 30: ./lib/YaST2/bin/yast2-funcs: Datei oder Verzeichnis nicht gefunden
./yast2: Zeile 267: set_lang_from_sysconfig: Kommando nicht gefunden.
./yast2: Zeile 192: check_qt: Kommando nicht gefunden.
Qt GUI wanted but not found, failing back to ncurses.

[Code]....

View 4 Replies View Related

OpenSUSE Install :: Bind /Dns Not Showing Up In Yast2

Sep 14, 2010

11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?

View 1 Replies View Related

OpenSUSE :: YaST2 Wanting To Install 250MB Of Extra ****?

Oct 2, 2010

Whenever I try to install anything from YaST2, it decides to include a lot of extra stuff I don't need. It says it's just added dependencies, but I hardly think the Russian translation for the open office help files counts as a dependency for WINE. This also happens when I try to install the amarok mp3 codec.

View 3 Replies View Related

OpenSUSE :: Yast2 Install PostgreSQL Server (Apache2)

Oct 23, 2010

This is my second day trying to learn opensuse. My lack of terminology makes it very hard to google for the answers. I need to do this:
opensuse:~ # yast2 install postgresql-server apache2 perl texlive perl-DBD-Pg libapr-util1-dbd-pgsql
I know about yast, however this looks like something that needs to ran from terminal.

View 9 Replies View Related

OpenSUSE :: When Try To Open Yast2 Or Install/remove Software Nothing Happens

Apr 19, 2011

When i try to open yast2 or install/remove software nothing happens! i tried to restart-logout-install a package from console but it still not warking!

View 9 Replies View Related

OpenSUSE Install :: YaST2 Says 15GB Of Disk Is Too Small?

Jan 12, 2010

I'll get to the point straight away... I'm trying to install OpenSuse 11.2 on a HD that already has Win 7 on it.I left out 15.52 GB of space just to install Opensuse but when I select that partition (which of course is empty) and tell YaST2 to install OpenSuse there it tells me there isn't enough space. Is 15 GB not enough!?inimum requirements where supposed to be 3GB I think...S this is how the disk is devided... Primary partition of 50GB for win 7, 400 of Logic partition for Programs, and supposedly 15GB for OpenSuse...

View 6 Replies View Related

OpenSUSE Install :: YaST2 Started As Root - No Index For Key

Jul 28, 2010

I am wondering (in the light of all 11.3 problems I am having) When I start yast2 (as root) it works but I always get the message
No index for key: "Name" value: "" on the xterm

View 1 Replies View Related

OpenSUSE Install :: Error Messages For All Options In Yast2

Mar 13, 2011

Yesterday, after I reinstall suse linux enterprise 11 in my note book. I got some error messages. They are :
From Suse linux installing processedacroread-9.3.2-0.1.1.i586.rpm
yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm
After installed suse linux.
error messages for all options in yast2.

The story is when I started installing suse linux, I checked first the live cd and I got message that live cd is okay. But, when the installation process was running, I got 2 messages error. But, the messages were informing me to verified from software management module.

So, my questions are :What are acroread-9.3.2-0.1.1.i586.rpm and yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm and what are they fungtions? If my guess is not wrong, acroread means acrobat reader. Is it true? Where is others place I can download them (no.1,2,3) beside the live cd? Or, if the easyest way is live cd. As yast2 got error, is there an other way I can installed them (no.1,2,3)?

View 1 Replies View Related

OpenSUSE Install :: 11.4 - Yast2 Error In Repository Initialization

Apr 19, 2011

I just installed 11.4 and was adding a new repository which I entered incorrectly. Yast2 complained and did not add it to the repository list. Now when I run Yast2 Software Management.

I get the following error message...
"There was an error in the repository initialization.
Error refreshing service Packman 11.4 (vaval.com - Islam Resources and Information. This website is for sale!
Parse error: repoindex.xml[3] Opening and ending tag mismatch: meta line 2 and noscript"

Since this line does not show up in my repository list I cannot remove it. How do I edit the data file directly and where is it located?

View 2 Replies View Related

OpenSUSE Install :: Can't Resolve Host For Yast2 In Console?

Sep 3, 2011

It's been a while since I've use linux (specifically suse). But my wife and I are expecting our first child and our office/second bedroom is now being converted into the baby room. I built the computer that is currently in there and it is a really nice one that I do not want to get rid of. Two 500GB Sata2 drives and 8Gigs of RAM (not to mention my quad-core Phenom AMD processor and sweet asus motherboard) -- I just can't get rid of it. So what I planned to do was turn it into a small home server. I did some research and kept coming back to using opensuse as the server. I read this article The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] | HowtoForge - Linux Howtos and Tutorials and it seemed to have just about everything I'd like to do (maybe some extras that I don't really need, but might in the future). Everything was going fine until I got to a certain point. The install went fine, and I was starting to customize some of the settings for my own home setup. Now, the problem...

I've gotten to page 3 of the tutorial The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] - Page 3 | HowtoForge - Linux Howtos and Tutorials

and I am installing packages through yast2, and all the packages installed fine except for 'compat-readline4'. I think this is a form of command line editor or something to do with that. I am sure I am going to need it to finish the server set up, but I can't get it installed anywhere. I've tried to install it by pointing directly to the mirror found at rpm.pbone.net and still I get nowhere.

Yast2 auto refresh seems to fail everytime I run it. Even though I installed all the other packages, I get an error message that says it can't get the medium. When I look at the details of the error it says it can't resolve the host for downloads.opensuse.org.

View 9 Replies View Related

OpenSUSE Install :: Yast2-firstboot Scripts Not Executing At First Boot?

Dec 31, 2009

I was running openSUSE 10.3 using yast2-firstboot and everything worked perfectly. I have since upgraded to 11.2 and after a post on this forum I was able to get yast2-firstboot to run. The control file was moved to touch /var/lib/YaST2/reconfig_system instead of touch /etc/reconfig_system. All is well there and firstboot does run. I have a script that basically sets up the hostname, IP addresses, etc on the machines. This worked in 10.3 but in 11.2 it doesn't execute. I can manually run the script which I have defined in the /etc/sysconfig/firstboot file. The SCRIPT_DIR="/usr/share/firstboot/scripts" I noticed a new entry this file labeled - # Action that should be done after the firstboot sequence finishes.

FIRSTBOOT_FINISH_ACTION="" Should I place my script here? I read the doc and you can use reboot but need my script to run first. To I just put the name of the script or the entire path to the script if that is the place to put it. On a side note. Does anyone know where the default FIRSTBOOT_FINISH_FILE="" is located? I want to use that as a template but change and add a few lines to this. I just can't locate it anywhere on the system.

View 3 Replies View Related

OpenSUSE Install :: Yast2 - Bash Apache Command Not Found

May 3, 2011

I ssh to a remote server which is running in SUSE. And I want to install apache2.0 there. Then I used yast2 to install it. But after installing it, I go to the terminal and type" apache -version" to check if apache is installed there. And it said "-bash: apache: command not found". I don't if I haven't successfully installed it, or I have installed it but just haven't put it into PATH yet. So, my problem is that can anyone tell how to check if I have installed it? If I have installed it, then what is the path of the directory it locates? And if I haven't probably installed it, then can you tell me the how I can installed it? And I am asked to install apache mod_wsgi as well.

View 9 Replies View Related

OpenSUSE Install :: Login (Could Not Start Kdeinit4) Yast2 Error

Sep 8, 2011

I am using opensuse 11.3. I am encountering a problem while trying to log in. The problem message was
"could not start kdeinit4. Check your installation"
I tried to solve this problem by following the instructions given in OpenSuSE 11.0 Could not start kdeinit4... i.e., I opened yast2 and then I had to select "software management" from there in order to update all the packages in kde4. But I got another error when I clicked it.

/usr/lib/YaST2/bin/y2base:/usr/local/lib/libstdc++.so.6: no version information available (required by /usr/lib/YaST2/plugin/libpy2wfm.so.2)

The error list continues. I cannot type whole error list ending with similar wordings as above as am using different computer. I tried to solve this one too by following the instructions in Relocation Error but I could not understand its line "...fixed the problem by taking /usr/local/lib out of ld.so.conf, and then running ldconfig" as am new to linux.

View 5 Replies View Related

OpenSUSE :: Software Management Is Not Working?

Jun 1, 2010

this is my first post the problem i faced is when i open package managment in yast it is showing error message "accessing package management failed" system management is locked by the application with pid 3934(/usr/sbin/packagekitd) close the application before trying again

View 1 Replies View Related

OpenSUSE Install :: Automatic Update Not Working In 11.2?

Dec 23, 2009

I enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?

View 4 Replies View Related

OpenSUSE Install :: Software Update Not Working?

Feb 9, 2010

I've recently installed opensuse 11.2 on my MSI wind & I am trying to do a software update for flash/mp3/java etc... compatability but the updater is not working.

Also, when I try to add the Pacman repository, I get an error message saying "Warning unable to download list of repositories or no repositories found"

View 6 Replies View Related

OpenSUSE :: Can't Update 11.3 \ Get A Similar Error Message When Starting Yast Software Management?

Mar 13, 2011

I usually run my updates every Friday, my last good update was 4-Mar-2011. I could not update this week and got an error -"PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium http://download.opensuse.org/repositories/openSUSE:/Tumbleweed:/Raw/openSUSE_Tumbleweed_standard/'"I get a similar error message when starting Yast Software Management.Is this related to the 11.4 release? I'm waiting for fewer bugs before I upgrade to 11.4, so I'd like to be able to keep current with 11.3.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved