When I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh
It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.
I have installed 11.3. Now for DSL I use PPP over Ethernet. I have configured DSL via YAST and it works fine. The connection is set at boot.
Now I want DSL to connect manually not at boot time. I did changes in the YAST/DSL to start Manual and rebooted. Once rebooted how do I connect?? Like any button/applet ??
My box has to connect to internet using specified http proxy.I have set proxy in both kde control center and yast2 control center. They both tell me the proxy works fine. But when I really try to use yast2 to update my system, it report an error:
Code:
Failed to download ./repo/repoindex.xml from [URL]
History: - [AbstractCommand.cc:195] URI = [URL]
Even I try
Code:
export http_proxy=http://XXXX
yast in command line,the error still exist.
In debian apt-get and slackware slackpkg,my proxy works fine. So I am sure it is not my fault and maybe it is a bug of yast2.
I use openSUSE 11.1 since quite a bit and I frequently use YAST (not as root of course). However, since the problems I have to deal with while trying to install WiFi internet access I meet the following problem. I call YAST, get the small authentication screen, I give the right password, which seems to be recognized as such, but I never see YAST appearing. So I can't manage neither my hardware, nor my software.
View 9 Replies View RelatedI just installed openSuse11.4 KDE in dual boot with Win7. I have observed that Firefox can open websites but in contrast to this, whenever I try to install rekonq web browser (thats because I find Firefox the slowest browser presently available on earth), Yast says about 593 MB of data to be downloaded and installed. It starts with 3.2 KB/s (or even lesser) speed and further decreases to about 1.3KB/s speed and then ... just stops there (waited for 2-3 hours for downloading just 4-5 MB of data).
View 9 Replies View RelatedI use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])
View 9 Replies View RelatedI installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies View RelatedI am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View RelatedI have VirtualBox 4.0.0 running on open SuSE 11.3 64bit. It works well. My connection to the internet is via a Pantech UML290 usb modem. I can select the usb device and use the Verizon Access Manager to connect to the internet. It says it is connected, but there doesn't seem to be a real connection. I can't hit any web sites with my browser. How can I get this working? I have also tried connecting via Linux then from within VB selecting the usb device, but that just disconnects the modem in the process.
View 6 Replies View RelatedI am trying Open Suse 11.2 KDE Live CD and don't know how to connect to the Internet. What do I do?
View 9 Replies View Relatedok so i have the new suse 11.2 installed it on my laptop with the intel wifi 5100 and i have no problem finding my network and connecting to it i can ping it i can log into it from firefox but i caanot access the internet if i try to go to google or ping a website nothing anyone envcounter this
View 5 Replies View RelatedI installed OpenSuse 11.04. To connect to the Internet, I use the script which connects to my Internet provider:
Code:
linux-aghn:/home/alex # cable-start
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
PAP authentication succeeded
[code]....
At this stage in another Linux distribution I am connected. In OpenSuse, when I start Firefox, it cannot connect. The problem is not in the browser, Software Management program also reports that connection is not available. ping 212.199.17.154 is successful. I tried to disable Firewall - doesn't help.
I installed 11.2 on an older HP Laptop which was running XP without any issues. Durring the install, the update processe failed (presumably unble to connect to respository). I am usind a wired connection and the nic is connecting to my router and is recieving an address via DHCP. I am also able to ping the workstion from the router's Web interface. However I am unbale to connect to the internet.I have turned off the Suse firewall via Yast and checked the settings against another computer running ver 11.1 .Everything appears to be correct but no joy.
View 9 Replies View RelatedSo here is what I am trying to do. I want to connect my Open Suse 11 machine to the internet. I am almost there.
1. I configured my network card and eth0 is up.
2. I configured my DSL with user name and password and I am authenticated.
3. An IP address is assigned to me and the DNS servers are retrieved.
However I cannot ping or visit any website I use the YAST automatic configuration and kinternet to connect. Here are the gritty details
[Code]...
I do see that kinternet has trouble reading /etc/resolv.conf. It says 'permission denied' although read permissions are set on both /sbin/route and the path that it links to. This should not matter however since the existing entries are already there and valid. I also tried to turn off the firewall suspecting it could be a problem.
So I am being authenticated successfully ( verified with the logs ); assigned an IP; the route seems ok; firewall seems ok. But I cannot browse or do internet things I have been tweaking settings for 3 days now and all seems in vain. Do enlighten me on what I am doing wrong. I bet its something silly that I overlooked. I have had success configuring the same thing in red hat linux and browsing the internet without trouble. Is there something OpenSuse specific that I am missing ?
since installing opensuse 11.2 KDE, is that I can connect to the local resources when I'm not connected via the pptp vpn to the Internet but as soon as I establish an Internet connection, I cannot. Under Windows and other distros I've tried, this has never been an issue, usually I can connect to either local or Internet resources, interchangeably. In a nutshell, I don't know how to troubleshoot this.
View 9 Replies View RelatedI just finished a brand new install of 11.2 on a workstation and it can't connect to the internet at all. I can ping Google and I can ping devices on my local network but I can't browse any web pages. I am able to ping the workstation with my windows 7 workstation. I tried disabling the firewall. I have it set to use DHCP.
UPDATE:
I can connect to google via IP. So it appears to be a DNS type issue, is there some settings I am missing?
installed openSUSE 11.3 and round that both wireless and ethernet connections could connect ok to my router but couldnt access the internet. I think its a bug because I didn't have this issue in previous versions of openSUSE.
The solution is to go into the ip settings in the wireless configuration, select the option to manually assign ddresses (not DCHP) and
- enter the ip address of your router in the default gateway and DNS server addresses
- manually assign an ip address to your computer rather than have the router do it
- it has to be in the same range as your router -n normally 192.168.1.x where x can be any number not already used.
I upgraded from 11.2 to 11.3, and now I can't seem to get my network/internet connection working. I am using a router and a cable modem, and the connection is of course DSL. I am using wpa2 for security. I can't even FIND where to enter my wpa2 key. When I upgraded from 10.x to 11.2, there was no such problem.
View 5 Replies View RelatedI don't know whats happened but yesterday when i logged in i was unable to load any web pages. Today login and the same.ifconfig shows connection, I can ping whoever i want just can't get any web pages to load, can't even login to my Thomson router. Have tried with firefox, google chrome and konquerer
View 9 Replies View RelatedI have an Intel Mac that I recently added openSUSE 11.3 to to have a dual-boot system. This has been working fine for me for the last 5-6 months. Then on 1/18/2011 I shutdown my system and totally disconnected everything and moved it all out of my office, so new carpeting could be installed. After it was installed, I reconnected everything and confirmed that everything on my Mac side works just fine. Then I rebooted into Linux and everything worked until I tried to run Firefox to connect to the internet. I'm told every time that it could not connect to the server for whatever I tried to connect to. I AM NEW TO LINUX AND ANY KIND OF NETWORK/INTERNET PROBLEMS, SINCE I'M USED TO MAC WHERE EVERYTHING JUST WORKS. But, I did click on "computer" in the lower left-hand side of the menu bar at the bottom of the screen. This shows on the right-hand side under STATUS "Network: none" and then it states to click this to get it started or connected (I don't remember which) so I click it. This brought up a window asking me for my password and then a new window where it went through a checklist of things and presented me my network settings, which
means nothing to me. However, after this I tried Firefox again with not luck.
Linux is what i'd like to learn, so Howdy to all and i hope to speak to you all regularly
in short, I started with Ubuntu Linux about 6 months ago, Didn't like it, i researched various distro's and came across, PC Linux OS, it was really cool, But i couldn't get it to connect Wirelessly, so i tried something else... the bottom line is i finally settled on SUSE Linux Enterprise Desktop 11, i seem to like it a lot.Ok.. now that introductions are out of the way
Background info: I've installed SUSE Linux Enterprise Desktop 11 on my Sony Vaio Laptop (VGN-NW15G) with no major issues, after a bit of mucking around, i got the LAN to Connect to the internet, after some more mucking around, i figured out how to get the WLAN to connect to the internet.MY Goal: To be able to Wirelessly Network my Laptop with My PC.so that i can access the files on the PC, From my laptop, and Vice Versa, but the important thing is to first be able to access the PC files from the Laptop.
NOTE: My PC has 4 Hard Drives (1 for the O/s, 3 Backups) they are all configured and Shared correctly for Networking and Wireless networking, and all the permissions are set correctly.Hardware and Software Environments:My Laptop : Sony Vaio VGN-NW15GOperating System : SUSE Linux Enterprise Desktop 11Wireless Capable, and has no issues Wireless Networking when running of a Hard Drive Loaded with Win 7 Ultimate 32bit, Therefore all Hardware is Compatible
My PC (Custom Built)
Operating System : Windows 7 Ultimate 64bit SP1
Motherboard: Gigabyte GA-X58-UD3R Rev1.0
[code]...
How can I connect my Nokia 5230 mobile to OpenSuse 11.4 for Internet? I have used Ubuntu, in which they have wvdial but OpenSuse 11.4 does not have wvdial in /etc folder. My phone is detected by OpenSuse but what to do next?
View 1 Replies View RelatedI have just installed OpenSuse in a brand new desktop. I have got no problem at the installation process. Somehow, I still could not get my firefox to browse internet.I set the network configuration by applying the IP Address, Subnetmask, Standard Gateway etc. I can ping, both internal network and external network. So, I assume, there is no problem exist in relay and accept data.Still, I can not browse using firefox.I could, indeed, open the website google.com, by typing http://74.125.43.147, but can not proceed if I typed
if config =
eth0 Link encap:Ethernet HWaddr 00:24:1D:C438
inet addr:192.168.1.57 Bcast:192.168.255.255 Mask:255.255.0.0
[code]...
I'm new in linux and openSUSE. How can I connect to Internet with dialup connection ?
View 1 Replies View RelatedI've recently installed openSUSE 11.3 on my old Dell. Now i can't connect to my wireless network, and i'm not sure why?
View 1 Replies View Related I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
how to connect to internet via ADSL,and wireless. i am writing all these frome windows
View 2 Replies View RelatedI configure my server just like on the link found in novell i hope some can help me here. my client is able to recieve DHCP address and everything is working fine on the network how ever my client cannot pullup any website, but my server is able to pullup whats wrong on this one.
Cool Solutions: HOW-TO: Set Up a SUSE 10 Machine As a Router
I have to manually connect to the internet (e.g. "activate"). How can I make the OS connect to the internet automatically?
View 2 Replies View Related