OpenSUSE Wireless :: Bluetooth Not Working With 11.4 32 Bits?
Sep 10, 2011this bluetooth connection doesn't work on my computer, previously I hadn't got problen on Ubuntu.
View 2 Repliesthis bluetooth connection doesn't work on my computer, previously I hadn't got problen on Ubuntu.
View 2 RepliesIm having an annoying problem here, after the reinstallation of opensuse, bluetooth works fine, i can connect my cell phone and logitech mouse normally, as soon as i install the bcm43xx from the scrtipt included in /usr/sbin/ bluetooth stops connecting to devices, it can find tem when searching but the forward button is dimmed.
when i try hcitool scan,= it successfully finds the device,
hcitool cc xxxxxxx it reports an I/O error,
I upgraded to openSUSE 11.4 from 11.3. Under 11.3 64 bits I had a wonderful wireless internet connection. Since the new installation, I do not succeed to get my computer on line. I'm glad that for the time being, I can use my Windows XP SP3 dual boot system.
Here are a few tests I ran :
Code:
Code:
Although I run this command as root, I get the message Encryption key : off
Code:
Code:
Code:
so, this seems to be ok.
But then I want to ping samba.org :
Code:
which gives this result :
What struck me is that apparently both drivers rt2500usb AND rt73usb are loaded. Is that necessary ? What struck me as well is that I can't get my encryption key when issueing the command iwconfig as root: it seems to be off ?
Then when I studied the hardware-info (via YAST), I got also this :
I'm quite new to linux and I recently (and courageously) upgraded the computer of my work from opensuse 11.0 32bits to opensuse 11.2 64bits.
Well, everything would be quite fine except that I still have some softwares 32 bits that have the 64 bits version available. I know that because, using YaST, I can see by the Installed software section that there are 'choices' of versions for some programs; these versions are 'i586' and 'x86_64', and many of them have the i586 version installed.
So, I wonder if there is some type of auto upgrade all programs which are i586 and have the matching x86_64 avaliable...
Trying to enable bluetooth (internal) on my Acer Aspire One D255. Despite bluetooth issues in general, here is the kicker: Acer decided to combine the fn+F3 key and fn+F2 key into one uber-network key. In windows 7 you hit fn+F3 and you get two options on your screen: enable/disable wireless + enable/disable bluetooth. Not so Ubuntu. I hit fn+F3 and it does various things to my wireless or my bluetooth every 3rd or 4th press. Disabling or enabling both... or neither. Very frustrating.
1) How does one remap the fn+F# keys (one for each)
2) Is there any other bluetooth voodoo for the bluetooth on this machine?
Ubuntu 10.04
Acer Aspire One D255
Bluetooth was working in KDE 4.1 in openSUSE 11.0 with no problems. I install openSUSE 11.1 and now the bluetooth icon that should show up in the system tray no longer shows up. If I hit Ctrl + Esc I can see kbluetooth4 in "System Activity". All that's changed is I did a fresh install (I don't do upgrades) of openSUSE 11.1 with the same KDE I was running in 11.0. I would like to know what's broke even if I can't fix it. I hate not knowing why something isn't doing what it's suppose to be doing.
View 9 Replies View RelatedWhen i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
1 | download.videolan.org-SuSE | VideoLan Repository | Tak | Tak | 99 | rpm-md | Index of /pub/videolan/vlc/SuSE/11.2/ |
2 | http-download.opensuse.org-f19df454 | Aktualizacje dla openSUSE 11.2-0 | Tak | Tak | 99 | rpm-md | Index of /update/11.2 |
3 | Index of /repositories/KDE:/KDE4:/Community/openSUSE_11.2 | Index of /repositories/KDE:/KDE4:/Community/openSUSE_11.2 | Tak | Tak | 99 | rpm-md | Index of /repositories/KDE:/KDE4:/Community/openSUSE_11.2 |
4 | openSUSE 11.2-0 | openSUSE 11.2-0 | Tak | Nie | 99 | yast2 | cd:/// |
5 | packman.inode.at-suse | Packman Repository | Tak | Tak | 99 | rpm-md | Index of /suse/11.2/ |
6 | repo-debug | openSUSE-11.2-Debug | Nie | Tak | 99 | NONE | Index of /debug/distribution/11.2/repo/oss |
7 | repo-non-oss | openSUSE-11.2-Non-Oss | Tak | Tak | 99 | yast2 | Index of /distribution/11.2/repo/non-oss |
8 | repo-oss | openSUSE-11.2-Oss | Tak | Tak | 99 | yast2 | Index of /distribution/11.2/repo/oss |
9 | repo-source | openSUSE-11.2-Source | Tak | Tak | 99 | yast2 | Index of /source/distribution/11.2/repo/oss |
today I installed Opensuse 11.3 on my new laptop, a Samsung R540. Initially I got my Logitech bluetooth mouse working because I hate the touch pad, then I got the wireless network working by upgrading the kernel with the broadcom-wl package at which point the Logitech bluetooth mouse stopped working. I am able to detect the mouse when I go to add new devices using the gnome-bluetooth applet but it times out when it tries to connect.
View 2 Replies View RelatedThe PIN validation screen is giving me some trouble. I am trying to pair an LG Rumor Touch and the PIN pops up and matches and the phone is happy to accept the pairing so when I click the PIN matches button on the Bluetooth Remote Device Wizard it will not close. It shows a spinny clocky but just sits there until I cancel. The device manager shows a greyed out light but it lists the device. The tray icon shows device, but gives No supported services found on the menu entry. Dolphin shows device but when I click it to browse it loads to an empty folder. The Device Wizard behaves this way for other phones also, but I was able to get some services running if I ignored it and let it sit there. If I canceled the process it messed up the services.
View 1 Replies View Relatedin openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 9 Replies View RelatedIn openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 5 Replies View Relatedhow to transfer files from my mobile phone to my opensuse 11.4 pc via bluetooth? ntw i need to buy a bluetooth car or equivalent maybe is there something common, chip and easy to set up?
View 1 Replies View Relatedwhen I reformat ubuntu, I use AptonCD to save packages and then restore them without downloading anything over again. what I want to know is: I have the 32 bits ubuntu installed and then I downloaded the 64 bits version. If i reformat to the 64 bits one, would the DVD saved aptoncd packages from the 32 bits work on the 64 bits installation?
View 4 Replies View RelatedI am wondering if I can install a 32 bits guest Windows XP in VirtualBox in my 64 bits Ubuntu Natty host? I need a 32 bits Windows to run some programs.
View 6 Replies View RelatedCan I install Linux 32 bits on system 64 bits?
For example if I have cpu 64 bits, can I install ubuntu 32 bits?
If yes, all drivers will befor 32 bits, right?
I just create a vm image with 2 CPUs to be used on a one CPU machine. it works great. Now, i am thinking about creating a 64 bits Redhat VM image to be run on my 32 bits machine. Is that possible?
View 2 Replies View RelatedI notice this in all my machines (32bits and 64bits).
View 1 Replies View RelatedMy laptop has a Realtek 8187b usb wireless card. It was working using ndiswrapper and WinXP driver in Debian Sid (32-bits version). I cannot use rtl8187 module because I just can use it beside the access point. With Windows (XP, Seven) I can go to my bedroom and use wireless, with Debian and rtl8187 module I can't. Ndiswrapper solved this problem...
Yesterday I've installed Debian Sid (64-bits version) and ndiswrapper is not working anymore. I've tried a lot of drivers (XP, XP64, Vista, Vista64, Seven, Seven64). XP64 version crashes the computer and I need to reboot to use Debian again. My access point is a D-LINK 2640t.
i've just installed openSUSE 11.3 on my dell studio xps 1640. but i have problem with my WLAN . it's a WLAN 1640 mini-card and i think there is no problem with driver. because it seems that it's installed correctly but i can't see any wireless networks (it says "Device is not ready"). is there any suggestions?by the way, when i turn my wireless to on (it's a touch key not a switch) only my bluetooth indicator is enabled not my wifi indicator.
View 6 Replies View RelatedI have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
My openSUSE's working unstable and very slowly! Wireless is starting very late.It appears 10min later after i loggen in,and wants me to enter wireless password.This windows is showing up so late,and I can't connect internet before it shows up.
View 4 Replies View RelatedI have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
I have Lenovo G550 and openSUSE 11.4. Everything's ok, wifi without problems, I could connect to anywhere I wanted to, but yesterday while laptop was running and was connected actually by wire to internet, after removing the wire I realized that I cannot connect to wifi (the laptop was hibernated during night) - even the light diode in the front of the laptop was not shining. I went to yast and realized that the wlan0 isn't enabled and there's new eth1 port. But the wlan by ifup I cannot start and the eth1 I cannot start as well.
View 4 Replies View RelatedI have a strange problem with my laptop and need your help in resolving it...i am using a Dell Studio XPS 1645..i have got everything working except the wireless.. and the real problem here is that the wlan detects the network but does not connect to it and will keep on looping back and forward doing the same thing again and again..I am using Opensuse 11.4 with Gnome 3 Shell..here is details of the commands that i tried using to fix the issue
# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
[code]....
I followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?