I'm using software RAID with this configure:100 MiB RAID 1 boot1 GiB RAID 1 swap30 GiB RAID 0 rootRest RAID 0 homeI'm using 2 hard drive with capacity of 500 GiB, I want to resize root partition to 12 GiB without losing my data on home partition, Can I unmount root and home partition from RAID and resize them without losing data?
View 2 Replies
I have a dedicated server that has CentOS 5.5 installed.. I can access that server via SSH as root. Now the issue is.. httpdocs folder is situated in /var where all website data is stored. I have more than 50GB of website that needs to be transfered to this partition but this partition is of 4.0GB..
# cat /etc/fstab
/dev/md1 / ext3 defaults 1 1
/dev/sda2 none swap sw
/dev/sdb2 none swap sw
[code]...
I'm trying to resize an NTFS partition on an IBM MT7977 Server. It has a Adaptec AIC-9580W RAID controller. I was thinking about doing it with a gparted LiveCD/LiveUSB, but then I realised that they won't have drivers for the RAID controller. A quick google for "9580W Linux" doesn't return anything promising.
View 3 Replies View Relatedmaybe this is something extremely simple and my brains are just mush after a whole night of struggling (and succeeding) with wifi driver issues.i'm running a brand new 10.10 netbook on a brand new asus eee 1015. i am trying to set up my email in evolution and the evolution windows are larger than the netbook screen, which means that the OK, SAVE, etc buttons are outside reach. i tried to resize, move window - resizing doesn't work and it only moves horisontally, not vertically.
View 9 Replies View RelatedFor Nautilus I downloaded and installed the nautilus-image-converter. After fresh boot I now have the option to resize and rotate images.
Unfortunately when resizing images Nautilus crashes. Does anyone have an idea how to resolve this?
I'm looking for a solution which would allow me to move and resize windows (e.g. rdesktop or firefox, etc...) in X. Preferably independent of either GNOME or KDE. The purpose of this is to be able to perform demo, where certain windows would be placed on a laptop's external monitor, without the obvious mouse cursor movements and resizing.
View 6 Replies View RelatedI installed openSUSE on my macbook pro 7,1. As of now I am trying to update the software, unfortunately, I have encountered a problem. As I hit the "Install Updates" icon, I get a window that gives me a readout of the current updates. No problem there. However, after I click the "Update" button, a second window pops up that gives a very long list of other software that needs to be either removed, installed, or updated for the original updates to be installed. Only problem is the list is so long, it extends beyond the visible desktop. This is a problem because I cannot click on the button to install those updates. The window cannot be re-sized, so there is no way I can reach the button, and I have even tried rotating the desktop 90 degrees (to make it longer), but still to no avail, as the install button is out of reach even then. I don't know how I can update the software if I can't hit the right button. Is there perhaps another way to get around this (like with terminal)?
View 1 Replies View RelatedA while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
I have two 250 GB drives setup with hardware RAID 1. I had on sda and sdb: 20 GB swap, 20 GB /, 198 GB /srv all was good until I started to run out of space on 20 GB /. So I booted the server with Suse 11.3 live cd and reduced the size of 20 GB swap to 10 GB and 198 GB /srv to 150 GB on sda and sdb.
All good so far, then tried to increase 20 GB / to 60 GB, but the Partition setup says the Max Size can be 20 GB, I have checked and I have 42.88 GB of Unpartitioned space. I have rescanned, rebooted, Server is still running fine by the way, but the 42.88 GB of free space is not made available for the expansion of 20 GB /.
I would like to resize my /home ( /dev/sdb6 ) partition - without losing data - to make room to create a swap partition (at the moment, I don't have any swap. Is it dangerous ?) IIRC, it was possible to change partition sizes from the install disk in repair mode (?) But I cannot find that repair mode on the 11.3 install disk. Has it been removed or is it somewhere deeper in the install or update process ?
[Code]....
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies View RelatedSo I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
View 9 Replies View RelatedCould any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
I am looking for image batch processing (mainly resizing) apps. As I have problems with Nautilus Image Resize in the other thread, are there any other software that is fairly easy to use to batch resize images? Preferably from a one-click install that works. I tried Phatch, but that didn't work for me.
View 9 Replies View RelatedI have a raid5 on 10 disk, 750gb and it have worked fine with grub for a long time with ubuntu 10.04 lts. A couple of days ago I added a disk to the raid, growd it and then resized it.. BUT, I started the resize-process on a terminal on another computer, and after some time my girlfriend powered down that computer!
So the resize process cancelled in the middle and i couldn't acess any of the HDDs so I rebooted the server.
Now the problem, the system is not booting up, simple black with a blinking line. Used a rescue CD to boot it up, finised the resize-process and the raid seems to be working fine so I tried to boot normal again. Same problem. Rescue cd, updated grub, got several errors: error: unsupported RAID version: 0.91. I have tried to purge grub, grub-pc, grub commmon, removed /boot/grub and installed grub again. Same problem.
I have tried to erased mbr (# dd if=/dev/null of=/dev/sdX bs=446 count=1) on sda (ide disk, system), sdb (sata, new raid disk). Same problem. Removed and reinstalled ubuntu 11.04 and is now getting error: no such device: (hdd id). Again tried to reinstall grub on both sda and sdb, no luck. update-grub is still generating error about raid id 0.91 and is back on a blinking line on normal boot. When you'r resizeing a raid MDADM changed the ID from 0.90 to 0.91 to prevent something that happend happened. But since I have completed the resize-process MDADM have indeed changed the ID back to 0.90 on all disks.
I have also tried to follow a howto on a similar problem with a patch on [URL] But I cant compile, various error about dpkg. So my problem is, I cant get grub to work. It just gives me a blinking line and unsupported RAID version: 0.91.
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies View RelatedHow long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies View RelatedI am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
I have got a mid-aged server which i upgraded with a simple SATA-Raid-Controller with a VT6421A chipset.I attached two Samsung 750 GB Hard disks and created directly after the POSt screen a nice Raid 1 array. Ubuntu will recognize it as well as windows (which I would never ever use... ;-)).SuSE 11.1 (we need this OS for confirmity) will simply just recognize both disks in the partitions overview. The point "RAID" remains empty.
Are there any hints out there how I can enable the whole raid stuff in open suse? Do I need to integrate other drivers / modules to get thinks working?
how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?
View 3 Replies View RelatedI recently installed openSUSE 11.4 at my desktop (Core i7 930, X58 chipset). All has gone really well, but I have a problem with the RAID 1 array in my system. I have created a RAID 1 array using the ICH10R controller, but in openSUSE I cannot access it. The array only contains one NTFS partition.
In Partitioner (in YaST) it shows the RAID array as "md126" and the partition as "md126p1". As mount point it shows "/windows/C *". It's the only storage device that is shows the mount point with an asterisk.
i have setup a software raid with mdadm. It consists of 4 hdds (1 samsung hd203wi and 3 * hd204ui) each with 2tb. When im doing benchmarks with bonnie++ or hdparm i get about 60mb/s write speed and 70mb/s read speed. Each single drive from the array has a read speed of > 100mb/s when testet with "hdparm -t".Im using opensuse 11.4 x64 with the latest patches from the update repositories. Im using the 2.6.37.6-0.7-desktop kernel.I have 4gb ram and an atom d525.
View 9 Replies View RelatedA friend of mine gave me an old Dell PowerEdge SC 1430 Tower Server. It has three hard-drives in it, that are about 160 GB each. The system had a Promise FastTrak TX1430 Raid card in it, and I am not sure. Would that be a hardware RAID, or would you consider that a BIOS Raid?In any event, have the very latest OpenSuse 11.2 install DVD.I can boot from the DVD, do a fresh install and the system starts where I can sign on as the user. When I look at the starting parition, it has /dev/sda /dev/sdb and /dev/sdc ... each being a hard drive. These are just listed under the hard-drives, not under RAID.
The problem is that when I cold shut-down the machine, and restart from a power-up, the system comes up and cannot find the boot disk. So, Obviously I am doing something wrong.I am used to having 1 or 2 drives in a machine, just SATA drives, and no raid at all. I have no experience installing Linux on a machine with RAID, again not sure if this is BIOS or Hardware RAID.
Now that I set up a 4x750GB OnBoard RAID 10, I'd like to install my 11.2 Suse (w/ GRUB dual boot)from BIOS, I've partitioned my HDD so I have:- Array1 = 30GB HTFS, 30GB XFS, 30GB Solaris, then extended part. for all (each OS) swap, temp, etc ...- Array2 = 30 GB HTFS (DMy Documents); 30 GB (/home); 30 GB (unformated) and then a big part for game install and VMware partition (Win98 for my old games, winXP32, etc ...)As a (sad) matter of fact, instal WinXP64 and/or Vista64 works perfectly. I see the array as partitioned by BIOS, and everything works.
But I can't have my 11.2 (64) SUSE installed on the drive, I have -for now- a VMware for it running ... on Windows :s(while I'd prefere the opposit)When I start w/ Suse11.2 DVD (downloaded), it says it can't install as there is NO HDD !!ok, fine, I plug back a PATA HDD, then I start the install, then I move the partition to the SATABUT, even so, I can't start the Suse ...I then lauch the repare/recovery on the install DVD, but it says that there is no root partition, no SUSE partition to fixe
After an install of suse 11.4, one of my drives raid 0 (ichr9 intel) does not mount and is not recognized as being formatted in NTSF, while the other unit raid 0 (ichr9) is recognized without problems?
View 4 Replies View RelatedI have run Ubuntu in the past and then switched to OpenSUSE several months ago and set up raid 0 on a 500gb hard drive and 700gb hard drive (I went with openSUSE because of the graphical raid setup.)
My whole partition setup looks like this:
500gb Hard Drive:
750gb Hard Drive:
md0 is the two 400gb partitions on each drive for a total of 800gb space on my /home partition ext4 filesystem ( 380gb space used ) md1 is 100gb ext4 / partition.
all raid 0
Now I was wondering if I downloaded the alternate install cd for ubuntu ( as OpenSUSE has crashed for the second time because of bad updates ( starts, but gets to terminal only ) ) would I be able to keep my raid 0 home partition and wipe the rest of the each drive and setting up Ubuntu keeping all of my files and settings intact, just to install my programs I need all while keeping my old settings ( such as firefox bookmarks, virtual box utilities etc. ) intact.
From what I know it's possible, but I don't know much about the Ubuntu Alternate install disk ( as I have been dealing with dependancy hell on OpenSUSE ) but in OpenSUSE it wont let me keep the old raid setup ( md0 ) Im guessing it is possible to set up the home directory on a different hard drive and then going back into the live cd, editing the fstab, and switching it to md0, if this is even possible, or would I need to configure the driver on that system before I did that Oh and I forgot to mention that I've only been running 64bit operating systems.
System Specs: AMD Dual core at 2.8ghz ( overclocked, stable, cpu ran at full bore for a day. only reaching 120f) Nvidia 9600 gso 368mb ram, 4gb ram at 800mhz
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies View RelatedShort story: Correct driver for 10.1 for the raid on the Intel S3000AH board?
Long story: This system crashed due (I think) to a bad memory module, had been running fine for 2 years, had been an upgrade from Suse9. The hardware is fixed but I get "GRUB" repeating on the screen when booting and that is all. I can't seem to find opensuse drivers for 10.1 (that is what I believe is on the system, I believe the data is still intact and don't want to compromise it if possible) It will not load the 10.1 drivers from the intel site, presumably (?) because they are for SLES, not opensuse. I can boot from a 9.3 CD with the drivers from the intel site, and can see the original partitions.
