OpenSUSE Install :: Getting Raid PowerEdge SC 1430?
Feb 5, 2010
A friend of mine gave me an old Dell PowerEdge SC 1430 Tower Server. It has three hard-drives in it, that are about 160 GB each. The system had a Promise FastTrak TX1430 Raid card in it, and I am not sure. Would that be a hardware RAID, or would you consider that a BIOS Raid?In any event, have the very latest OpenSuse 11.2 install DVD.I can boot from the DVD, do a fresh install and the system starts where I can sign on as the user. When I look at the starting parition, it has /dev/sda /dev/sdb and /dev/sdc ... each being a hard drive. These are just listed under the hard-drives, not under RAID.
The problem is that when I cold shut-down the machine, and restart from a power-up, the system comes up and cannot find the boot disk. So, Obviously I am doing something wrong.I am used to having 1 or 2 drives in a machine, just SATA drives, and no raid at all. I have no experience installing Linux on a machine with RAID, again not sure if this is BIOS or Hardware RAID.
View 4 Replies
ADVERTISEMENT
Oct 4, 2010
I am trying to install Centos onto a Poweredge 2650, with Dell Poweredge Expandable Raid Controller. I have 5 SCSI disks installed, and have created and initialised 2 logical volumes via the SCSI controller setup utility (Ctrl M after boot). After reboot the system reports two logical volumes present.
The Centos installer cannot find any disks when it gets to the disk partitioning/setup step. It reports no disks present. Do I need a specific driver for this controller?
View 2 Replies
View Related
Oct 15, 2010
I just got my new server today (a Dell Poweredge 2850), and I'm trying to install the latest version of Ubuntu on it, however it fails to detect my hard drives. They are in a raid array (raid 1 I believe). I've never worked with a raid array before, and I'm wondering, is there anything special I have to do to install Ubuntu on one?
View 5 Replies
View Related
Dec 15, 2010
Does anyone know how to list hardware raid status under Redhat 5.4 running on Dell PowerEdge 2850?
View 2 Replies
View Related
Apr 19, 2010
Has anyone successfully installed openSUSE 11.2 on a Dell PowerEdge 1850 system?Undoubtedly, it wasn't wise to attempt to upgrade from 10.2 to 11.2 but I was forced into it by a security audit of DMZ systems.It didn't go as smoothly as the jump from 9.3 to 10.2.I've spent the better part of a week getting an openSUSE 11.2 system installed.I went back to reiserfs and managed to get through and apply all the updates to openSUSE 11.2 today.When I got to the final reboot, it failed when I attempted to log into the system.Basically, the keyboard and mouse became inoperable.The only way out of this situation is to mash the reset button.
Rebooting into safe-mode and adding level 3 to the safe mode boot options, I get to the point of starting sshd when the lock-up occurs.It looks like X11 is the culprit.Booting a forensics DVD, I find that there is an xorg.conf.installation but no xorg.conf file.The ATI Radeon VE chip set is used on the PowerEdge.From another openSUSE system that I haven't upgraded, I see that X11 was configured for VESA mode. This is, probably, the mode that is needed as console access is, normally, through a KVM.Can anyone provide a way to get past this problem with a workable keyboard and mouse?
View 9 Replies
View Related
Sep 29, 2010
Has anyone got any pointers on how to get 11.3 installed on a Dell Poweredge 6800 server? System starts to boot from Linux DVD, the screen goes screwy and then the system reboots.
View 1 Replies
View Related
Jul 15, 2010
I am trying to install CentOS 5.5 on a older Dell PowerEdge 2450. Is there any reason the install would fail? It does load the initial install screen but when I hit enter, it simply goes to a blank screen with a blinking cursor ( I want to say that it says to me "What are you doing Dave?"), but I won't. It just sits there on this screen.
View 3 Replies
View Related
Feb 28, 2011
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies
View Related
Jul 20, 2010
I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech
View 4 Replies
View Related
Feb 1, 2010
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
View 3 Replies
View Related
Feb 12, 2010
I am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies
View Related
Mar 11, 2010
I am having issues installing Centos on a Dell Poweredge 1950. I have tried 5.3 and 5.4, and the text only install. The error I get is when I select what keyboard layout to use. An error window pops up and says "Assertion ((C * heads + H) * sector + S == A) at dos.c:624 in function probe_partition_for_geom() failed " I can click ignore and cancel but it instantly pops back up. I have tried to look up the error but can't find any information on it.
View 4 Replies
View Related
Aug 23, 2009
FC11 i386 dvd iso image passes pgp verify. Burns fine and verifies fine under nero. Boots fine and verifies fine on my athlon system and installs just fine. Not one issue at all. 1374 pkgs install without issue. Take the same disc put it into my dell poweredge 2850 (dual xeon) and the disc fails to verify.
Even if I go ahead and try to install, it will boot and go through the menus. Then on package install at some point it will say one is corrupt and halts the install. Yet ubuntu 9.04 installs just fine on it. So I don't see how it could be the dvd player itself, though not 100% ruled out.
View 4 Replies
View Related
Dec 14, 2009
I have got a mid-aged server which i upgraded with a simple SATA-Raid-Controller with a VT6421A chipset.I attached two Samsung 750 GB Hard disks and created directly after the POSt screen a nice Raid 1 array. Ubuntu will recognize it as well as windows (which I would never ever use... ;-)).SuSE 11.1 (we need this OS for confirmity) will simply just recognize both disks in the partitions overview. The point "RAID" remains empty.
Are there any hints out there how I can enable the whole raid stuff in open suse? Do I need to integrate other drivers / modules to get thinks working?
View 3 Replies
View Related
May 17, 2010
Now that I set up a 4x750GB OnBoard RAID 10, I'd like to install my 11.2 Suse (w/ GRUB dual boot)from BIOS, I've partitioned my HDD so I have:- Array1 = 30GB HTFS, 30GB XFS, 30GB Solaris, then extended part. for all (each OS) swap, temp, etc ...- Array2 = 30 GB HTFS (DMy Documents); 30 GB (/home); 30 GB (unformated) and then a big part for game install and VMware partition (Win98 for my old games, winXP32, etc ...)As a (sad) matter of fact, instal WinXP64 and/or Vista64 works perfectly. I see the array as partitioned by BIOS, and everything works.
But I can't have my 11.2 (64) SUSE installed on the drive, I have -for now- a VMware for it running ... on Windows :s(while I'd prefere the opposit)When I start w/ Suse11.2 DVD (downloaded), it says it can't install as there is NO HDD !!ok, fine, I plug back a PATA HDD, then I start the install, then I move the partition to the SATABUT, even so, I can't start the Suse ...I then lauch the repare/recovery on the install DVD, but it says that there is no root partition, no SUSE partition to fixe
View 9 Replies
View Related
Jun 9, 2011
After an install of suse 11.4, one of my drives raid 0 (ichr9 intel) does not mount and is not recognized as being formatted in NTSF, while the other unit raid 0 (ichr9) is recognized without problems?
View 4 Replies
View Related
Apr 6, 2010
I'm having some (well, a lot actually) of problems trying to get OpenSUSE 11.2 installed on my home PC. I am attempting to set up a dual boot configuration with Windows 7 installed on an bios Nvidia RAID 0.I was able to shrink the partition in Windows, and rebooted onto the net install for OpenSUSE (the MD5 validated DVD install failed multiple burns with "Repository not found"). I get into the graphical installer portion with no problems off the net install CD. However, the installer is not recognizing that there is an existing RAID 0. It lists the 2 SATA disks in the RAID separately. I can click on SDA1, and both SDB and SDB1 and it shows the disks, but does not recognize any existing partitions. If I click on SDA I get an immediate segfault in YaST and drop back to the text mode installer menu. It is loading the nv_sata module just fine.
From forum searches and google it seems that this is not usually a problem. My motherboard is a Gigabyte GA-M57SLI-S4 with the Nvidia Nforce 570 chipset running an AMD X2 64 3800+. Removing the stripeset and redoing it as Linux software RAID is not an option, I do not have enough space for a total backup/restore. Anything I do has to be nondestructive to the existing Windows installation.I really want to have a linux installation but between the DVD installer failing and now this issue I am about ready to give up on it.
View 9 Replies
View Related
Jun 19, 2010
I installed OpenSuSe 11.2 x64 on my PC.It's not work will:After installation, the system auto login KDE GUI.but when I reboot(or shutdown and open) my computer. Message on screen meaning:"can't find bootable partition".My PC's hardwareMother Board: DFI 790FXB-M3H5(South Bridge: SB750)Hard Disk: WD 500G*2 Raid 0(via SB750 Chip function)Oh, I'm sorry, It's Fakeraid, not hardraid.
View 9 Replies
View Related
Jun 25, 2010
I've got 3 extra disks on OpenSuse 11.2 - all the same size. I've created a partition on all of them as type 0xFD. If I then try and add raid in yast I get "There are not enough suitable unused devices to create a RAID."
View 9 Replies
View Related
Aug 14, 2010
I am hoping there is somebody out there who might recall DPT hardware and be able to get it to work under Linux. DPT were bought up by Adaptec but made great SCSI cards. The PM3334UW is a true hardware raid device which I have been using in SOHO environment for the last 7 years or so with IBM Warp 4.52 (MCP2). The box, although legacy hardware is sound and I wish to keep it running but hoped to have an openSUSE option. Unfortunately I cannot find a driver for the SCSI RAID card. There are a good deal of posts concerning eata_dma.c and other eata based drivers as possibles but when I load the eata driver that is available when loading openSUSE 11.3 I am asked for parameters and I haven't a clue what these should be.
View 4 Replies
View Related
Feb 3, 2011
I have got a server which has a motherboard with nvidia mediashield raid built in, with Centos installed it picked up the raid 5 array that i had configured as one drive so the os install was straight forward. When i booted the netinstaller of opensuse 11.3 run though the setup, when getting to the partition setup is was picking up the three hdd as seperate drives and not one, so i got to a certain point and aborted the installation and i re run the installer, the raid status said the array was degarded or something which i knew there was nothing wrong with it as i had set it up only about 2 weeks ago and there was one drive missing aswell. So i removed the array and re configured the array and rebooted and the raid status said healthy again as it was before on centos, then i run the opensuse installer again and it went though the process again but completely stop at "Searching for linux partitions" , cursor was working fine , but nothing else was so i had to press reset.
This was my problem, i know kind of what the problem is, but what i want to know is , i thought opensuse is based on rhel same as centos but how comes centos has the drivers for the raid chip i have in my board and opensuse has not.
View 5 Replies
View Related
Mar 16, 2011
I'm trying to reassemble a broken raid 5 array. The array has 3 drives. Here is some output from 'mdadm --examine': hutch:/home/sam # mdadm --examine /dev/sdb1 /dev/sdb1: - [URL]
View 1 Replies
View Related
Aug 11, 2011
I want to install opensuse on a poweredge 830 server with a cerc 1.5/6 hardware raid configuration, since i have no previous experience with linux I'm having a hard time to grasp the way to do things. But i would love if someone can direct me to a good tutorial or document where i can learn more. At this moment I'm stuck (though i decided to install using default options yast gave me, just to test) with partitioning and RAID.
So this is what i would like to know:
Conditions:
*Server currently has a windows 2003 installed but I don't need it so actually that is going to go away
*this is a small network, less than 30 users
*Server is going to be used to authentificate users through openldap, also is going to serve files (since we do printing many of them would be 100mb +), and also depending on performance may be used as printing server too (i know that's a lot of tasks but besides printing other functions won't be used that much)
*Server has 2 phisical HD that i want to use with RAID 5 or 6 there are drivers for that already in dell's webpage
* I'm installing openSUSE 11.4
Questions
1.- Does linux really needs a dedicated swap partition
2.- If so how raid works with that, is it going to be mirrored too (I don't think)
3.- Is it better to install linux in 1 HD only with no swap partition, leave the other blank and install raid after linux is up
4.- What's up with ext units, in the sense that now it looks like there are too many units.. not only the simple 'os, data' i'm used to
Objective
1.- I just want to have a linux installation with raid 5 configuration using 2 hd
View 5 Replies
View Related
Jan 27, 2010
I'm having some problems with a hosted openSUSE 11.2 server. It was running fine until I did a "zypper up" to apply patches. This included a kernel update.
On reboot the root partition does not mount the / partition giving the following error:
Unrecognized mount option "defaults.noatime", or missing value mount: wrong fs type, bad option, bad superblock on /dev/md2.
Through an Ubuntu rescue disk (this is what Hetzner provides) the disk can be mounted without problems.
( I installed a fresh openSUSE 11.2 with a similar configuration and got the same results after the update)
The server is a hosted installation from Hetzner in Germany with just the basics for LAMP setup.
The disk setup is as follows using software raid1:
swap /dev/md0 (/dev/sda1 /dev/sdb1)
/boot /dev/md1 (/dev/sda2 /dev/sdb2)
/ /dev/md2 (/dev/sda3 /dev/sdb3)
View 3 Replies
View Related
Feb 11, 2010
I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".
So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.
View 9 Replies
View Related
Feb 27, 2010
I'll have a Sony VAIO AR290 with 2 HDD, earlier I'll have a Windows XP and SUSE and RAID was turned off. Now I turn on RAID in STRIPE mode for better productivity, Windows 7 installation was successful, It creates MBR partition (100 M and C: HDD. During SUSE installation(I've chose all parameters- swap and partition) installation process stop at 1% on "operating with HDD" and my VAIO dont answer on any key pressed (alt ctr del, ctr c, esc) and I'll should to turn it power off. During surfing web, I'll find some solutions to solve it by creating root partition but It hasn't any results.
View 7 Replies
View Related
Aug 8, 2010
I've been trying on new installation for opensuse 11.3 on Intel P55 raid5 configured system, one non-raid disk for boot device, a raid5 array as data device. However, installation always gets hung on Searching Linux partition step and I was able to see the vgscan process was the last command to run. Is it a known bug? Does anyone have the same issue as mine?
View 5 Replies
View Related
Sep 16, 2010
i trying to recreate(after zero-superblock) raid 10 but get stuck with near=1, far=2 layout, how i can setup this layout using mdadm.
View 2 Replies
View Related
Sep 17, 2010
I have a Dell Studio XPS running openSUSE 11.2 with dual mirrored disks (using Dell's SATA controller). Does anyone know how I can set up automatic monitoring of the disks so that I will be informed if either fail? I think smartd might be what I need here. Is that correct? I added:
/dev/sda -a -d sat -m <my email>
/dev/sda -a -d sat -m <my email>
smartd is running, but how do I know that it will report what I need? I also have a client with a Dell PowderEdge SC440 with SAS 5/iR also running openSUSE 11.2. They also require automatic monitoring. There doesn't seem to be a SAS directive for smartd. I notice that the newer release says it does support SAS disk. I upgraded to 5.39. On restart (with DEVICESCAN as the directive) I get the following in /var/log/messages for my SAS RAID disk.
Sep 18 10:47:26 harmony-server smartd[25234]: Device: /dev/sdb, Bad IEC (SMART) mode page, err=4, skip device
I ran:
smartctl -a /dev/sdb
and got the result:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, smartmontools
Device: Dell VIRTUAL DISK Version: 1028
Device type: disk
Local Time is: Sat Sep 18 11:32:08 2010 JST
Device does not support SMART
Error Counter logging not supported
Device does not support Self Test logging
Is there some other tool/package that does support DELL virtual disks?
View 2 Replies
View Related
Feb 27, 2011
I have a software RAID 1 (mirroring) on my 2 hard drives configured through OpenSuse 11.3 installer. When I boot from the OpenSuse 11.3 install DVD in rescue mode, the RAID isn't recognized, ie attempting to mount /dev/md0 results in 'bad superblock' messages. I can still mount individual disks in the array though (/dev/sda1, /dev/sdb1, I did it read-only so not to corrupt the array). I also tried booting from the Centos 5.5 install DVD in rescue mode on the same computer and it has no problems finding the RAID 1. I was able to mount /dev/md0. Is the OpenSuse 11.3 install DVD in the rescue mode not supposed to find the RAID 1 or am I doing something wrong here?
View 3 Replies
View Related
