I have a problem with Kontak (PIM). When it starts it freezes with the "tip of day " showing and i cant close or cancel the tip of day or disable it.The program does not respond to any mouse inputs.I am running opensuse 11.3 KDE All other programs work if started individually.
View 1 RepliesI installed OpenSUSE 11.3 a few weeks ago. It freezes 10 - 15 seconds after startup. I got a brief, but incomplete reply to what I thought was another related problem on the forum (OpenSUSE 11.3 / Mozilla Firefox freezes upon moving the mouse), but it turns out that the problem is neither the mouse nor Firefox. It freezes without doing anything special.
View 9 Replies View RelatedI've been having problems with Ubuntu/Kubuntu (I switch back and forth) freezing shortly after booting and logging in. I installed 9.10 a few days ago (fresh install, new hard drive). I installed all of my packages, and everything works fine except this freezing bug.
If there is not a freeze within a few minutes after startup, then there so far has not been a freeze at all (so, if everything is fine after a short time, then everything will continue to be fine). I'll try to add some information here that will be helpful: I dual boot with Windows 7, which is installed on sda1. Ubuntu is on sdb. There doesn't seem to be any problems with this. I have an Nvidia 9800 GTX+ graphics card (I use the proprietary driver). 8 GB Ram, Intel quad 2.66 CPU.
I've been using 10.04 for a while now with no problems but for some reason it started freezing on the splash screen, 2 of my keyboards lights start blinking and thats it, I've tried with recovery mode and no luck either. The thing is I don't remember doing anything wrong.
View 3 Replies View RelatedI was running update manager in ubuntu and my system froze completely. I had no other option but to manually switch of the PC. Then after restarting the PC I got some error lines but I can't remember what they said. It didn't matter which linux version I chose from GRUB, nothing worked. Today when starting up shortly after the Ubuntu 10.10 screen with the blinking dots below it I see a dos type screen with only a flashing cursor and nothing happens.
Is there any way I can fix this? Or repair the ubuntu installation without loosing all my data/settings etc? I'm running now from the live CD. I can access the disk drive that has ubuntu installed on it. I have XP running on a separate disk and I can boot into XP from my motherboard's bios boot menu.
i got an pclinuxos LXDE version on my netbook. i installed abiword on it. after that, synaptic and any other package manager refuses. synaptic freezes as soon as i start it up. only a reboot will close it. i searched google, found this: [URL]. i don't understand the instruction there, but it seems to be the same problem i had. i believe they suggest reinstalling. this is a mission-critical-workstation, i can't afford an downtime more then 1 day. so i can't do a re-install. (duo settings i have to apply again, this would take long)
View 2 Replies View RelatedI installed debian 7 lxde from lxde cd. It freezes on logging in (i.e keyboard doesn't work,desktop freezes and only mouse pointer works.But,I can't select or view anything.Only mouse pointer can be moved.).
But,If I do not login with the display manager and login (my username and not root) via another terminal like tty3 or tty4 using alt+ctrl+F3 or F4,everything works fine.
Every time I launch Firefox and go visiting some websites, I notice it freezes for about 10 seconds. Not always in the same websites, but it always happens sometime in the first 2 or 3 minutes of running. I can see the hard disk led is ON all the time the browser is hung.
My operating system is Linux and I don't currently have any extension/plugin installed here.
I have no form completion, no history and have no more than 20-30 bookmarks.
Has somebody noticed something similar, or know how can I debug this to find out what Firefox is doing or trying to do?
I have used a few versions of ubuntu now and each one seems to encounter the same problem loading ubuntu.
I am using a Samsung x05 laptop.
If I have a mouse, printer or even wired internet connection plugged in at any point during startup I will not be able to get past the login screen. I can login fine but the system freezes at the beige screen before the desktop appears.
I recently partitioned and installed Windows xp, which doesn't have the same problem, so I presume it is some kind of incompatibility between Ubuntu and my laptop?
I am trying to install Xubuntu on a old toshiba satellite A55. I threw in the live CD and did the try without any changes to your computer. The starts to load, when it finishes loading, and I can finally start poking around it freezes right away. When it freezes the graphics get a bit messed up, little ghost images next to their actual image appear (like a second icon of the same thing slightly offset, and blue/white) I had the same problem with Mint. Only thing I have been able to get running is puppy linux.
Laptop info:
Celeron M CPU
roughly 750mb ram
ata-100 western digital drive
Toshiba Satellite A55-S3062
Everything was starting up fine, then a few times it would freeze during boot, now every time it freezes during the boot. I removed quiet, and added nosplash to the grub startup option, and I see that where it waiting is on a line that says: scsi4 : mvsas There is no disk activity at this time, and it'll sit there forever.
View 2 Replies View RelatedI just tried to upgrade from ubuntu 10.10 to 11.04 (64bit). Everything went fine until the machine tried to reboot. Now it stops while booting on the screen where the ubuntu logo and five red dots appear. I'm unable to open a terminal (alt+ctrl+f1 does not result in anything) and the only thing I've been able to do is to reboot the machine.
If I reboot by pressing ctrl+alt+delte I see some information for a short while, it seems that the boot stops on "checking battery state" I've googled this, and it seems that quite a few other have had the same problem, but they have been able to open a terminal, any ideas on how I can do this? Or any other suggestions on how to fix this?
My system is a dekstop with a Nvidia GTX 260 graphics card. I recently installed the newest Nvidia driver. I forgot to mention that I did an online upgrade.
I did a fresh install of 11.04 a week ago and I had my screen saver set to run 'Floating Feet' after 15 minutes idle time. Twice I've left my computer, and returned, clicked the mouse, and found my computer frozen on the screen saver. I was able to recover once by hitting the power button, which brought up the shut down/restart options and normal desktop. It hasn't happened since I turned off the screen saver, so I'll just leave it that way until a solution arises.
View 4 Replies View RelatedI was trying to automount a few NTFS partitions last night. Upon reboot, I got the following error messages.
/device/sda2 ... is not ready or present
/device/sdc2 ... is not ready or present
Then Ubuntu just freezes. I am using Ubuntu Natty, if that helps. I am currently unable to get into Ubuntu without a LiveCD.
As the title say, I'm having this odd problem, consistently, if I disconnect the USB keyboard from the box, it hangs after initializing md0 (raid of 10 sata disks).. The cursor blinks, but it never gets further, I've had it hanging like that for a day (I started the box before I went to school, and when I got home, I found that it never booted completely)
If I connect the keyboard, the box boots fine..
I have attempted Ubuntu, Debian, and Wuby, and none of them work so the problem is not a simple Cd drive error. Ubuntu and Debian freeze at roughly the same point in the installation. Wuby installs succesfully in Windows, but then dies in attempted startup. Ubuntu won't even boot from the CD. I have tried the various "safe" installers, text only methods, none work. Strangely enough, I have managed to get Knoppix to boot from DVD. I would prefer to get Ubuntu running than Knoppix however.
View 3 Replies View RelatedWhen I startup Firefox Fedora's screen freezes. The only way to restore is to power off and on!
I've tried yum remove/install but the problem persists.
Anyone know a solution?
I just installed ubuntu 10.04.1 using the wubi installer for windows. Installation finished without problems so I restarted my laptop as I was asked to. Then I selected to run ubuntu, there was the black screen "completing installation" and then came the startup where it stopped working.
View 9 Replies View RelatedAfter yesterday system update the x server won't start up anymore. It locks immediately with blank screen leaving the computer unresponsible until hard reboot. I hat to once again go with the "vesa" driver, as I mentoined earlier in another thread it is a life saver, always works. My video card is integrated Radeon HD3250 - video driver was fglrx from ATI itself. "radeon" driver now reports that modesetting is not supported and will not load with EE-type X server error.
Anyone else experienced this? Are there any changes in the most recent X server that once again break compatibility with the official ATI driver?
For some reason my disc I burned for ubuntu desktop 10.10 freezes when I get to the ubuntu logo with the 5 dots. I am able to install ubuntu server just fine.
I tried to install desktop on top of server using sudo aptitude install ubuntu-desktop and then whenever I reboot it freezes during startup.
I think it might be my swap partition. I recall seeing a blip of an error talking about "press C to skip or M to start maintenence" or something like that. It never stayed on the screen long enough for me to read it.
1GB Dane-Elec stick is what I'm using.
The only thing out of the ordinary I noticed is that when I clicked "Erase disk" I ended up with a choice of two: /dev/sdc (with no indication of free space but a capacity of 983.0MB), and /dev/sdc1 which showed 288MB free before I erased it and a capacity of 980.4MB.
This app has never worked on any system I've tried it on, but this particular machine is an LTS (10.04) with recent hardware so I'd like to get it fixed if possible.
I dual booted my windows 7 with Ubunto 10.04 and it said it successfully installed. I booted the ubuntu and it freezes on th Ubuntu image with the message( i didn't copy the message). i rebooted and freezes again on an image after the Ubuntu Image.So itried recovery mode and it worked. i always use recovery mode to use ubuntu.
View 1 Replies View RelatedI just installed OpenSUSE 11.4 - fresh install (no upgrade). However with 11.4 there is a very annoying bug (actually, two of them, but I'll post the other one to a different thread): every few seconds (10 or 15) the system 'freezes' for a split second. anything that is going on (visible) freezes for half a second or so. If you're in the process of moving the mouse, the pointer will stop dead in its tracks for that half second, and then when it resumes (a half-second later) it picks up from where "it would have been" had there not been a freeze (it will jump from one position on the screen to the next, as per the actual movement of the mouse. If I have a window (a terminal window for example) that is scrolling output, the scrolling will stop for the same half-second. I did a quick monitor with 'top' refreshing every tenth of a second, and when this freezing occurs is *seems* to coincide with spikes in the kernel thread 'kworker'. I have a hunch that this *may* be due to new built-in NVIDIA drivers that are in 11.4 that I wasn't using in 11.2 (where I compiled the driver from scratch) as I have seen a few posts about issues with this and the 'nouveau' driver - this is just a hunch. Not that dmesg also reports this log quite frequently:
[code]...
This is a FAST system (3 GHz and four cores) that is otherwise running IDLE, other than logging into KDE. So it's not a case of high CPU usage or I/O usage. The video card is: VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2). I have installed a basic KDE 64-bit distribution, using NO proprietary repositories - it's essentially and "out-of-the-box" install.
I'm using Opensuse 11.4 with KDE and have set the workspace type to "Netbook". Lately I have been experiencing complete freezes of the workspace (the horizontal panel and all it's widgets and elements, the activity pages and even yakuake won't respond to it's hotkey) but the Alt+tab and the Ctrl+Alt+F12345678 key combinations and other programs that might be already running (like firefox and Akregator) don't experience any problems and keep functioning uninterrupted. Sometimes the workspace remains unresponsive indefinitely and in other cases some prodding and left-right click spamming seems to remove the problem in some weird magic way... I usually notice that this freeze has happened after i decide to take a break from browsing with firefox and try to close it thru the 'application control settings' widget. That's when i find out that it's buttons can't be pressed and with an alt+tab to the desktop I see that I can't interact with it in any way. Most of the time i have to reboot my computer through the Ctrl+Alt+F1 terminal...
I also have to mention that i recently started using tumbleweed but the problem was there before that and nothing seems to have changed after the update from the tumbleweed repository.
I've been Linux-only for several years, and (finally!) installed Suse 11.2; AMD 64-bit, 3Gb RAM.I'm getting random freezes, after I've pressed the Super (Windows) button; screen still visible, mouse pointer moves, but nothing happens, I have to restart. Really frustrating; it's my major complaint, otherwise 11.2 looks good.: I use super+scroll button for desktop zoom in Mint with no problem at all.
View 2 Replies View RelatedMore than often, my OpenSUSE 11.3 box completely freezes when surfing the internet with FireFox, forcing me to stop the computer the hard way (pushing the on/off button) and restart itDoes anyone encounter the same issue? Does anyone has a start of a clue to explain me why? Soes anyone could tell me where to start to look for the reason!Note that the last time the problem occues (i.e. 10min ago) was on this site (no other tab opened).My configurationSONY Vaio VPCF11S1E: Core i7 720QM, 6GB RamOpenSUSE 11.3 64bits. I did not install the official NVIDIA driver as it causes the screen fonts to be extremely bigOPenBox-session + tint2FireFox has the adobe flash plugin installed
View 7 Replies View RelatedI have updated Opensuse 11.3 to 11.4. I have also updated to the latest NVIDIA drivers. Now, when Gnome desktop starts it freezes: it draws all the shortcuts on the desktop but I cannot use my wired mouse to click anything as if the desktop has freezed. The cursor shows that something is loading. I cannot also use Ctl + F2 to start xterm... But I can use Ctl + Alt + F12, so the keyboard is working.
View 5 Replies View RelatedKDE has been randomly freezing/stalling when changing window focus, opening, or closing programs. It does not seem to be restricted to any particular programs. If I change focus by clicking in a new window, often, when the system comes out of it's frozen state, the mouse is still in a button down state even though I've released the click.No errors are generated in /var/log/messages or in ~/.xsession-errors.I'm running 11.3 and here's the output of uname -a:
Code:
Linux dan-desktop 2.6.34.8-0.2-desktop #1 SMP PREEMPT 2011-04-06 18:11:26 +0200 x86_64 x86_64 x86_64 GNU/Linux
[code]...
We are having a cluster with couple of disk servers, compute nodes and a head node. Disk server is nfs mounted on all the compute and head nodes.
The problem is that if any of the disk servers hangs, it freezes rest of the cluster too which is dangerous. Ideally, cluster should not care about the hanged server and run without any problem except files from that server is not visible.
Is there any way I could avoid the problem of freezing cluster because of one hanged server?
I have OpenSuSe 11.2 64-bit installed on my HP Compaq 6730s laptop. When I'm trying to switch user black screen appears and my system does not react on any key combinations (ctrl+alt+del; ctrl+alt+F7 ...). This was not reproduced before ATI driver installation.
# uname -a
Linux xela 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux