Fedora :: Get BIND Running On One Of Our F10 Servers?
Aug 12, 2009
I'm trying to get BIND running on one of our Fedora 10 servers, since we've had some issues with the DNS from our service provider. This BIND server is not authoritative for any domain, it's merely for caching purposes. I used the sample DNS file at [URL].., and modified it slightly with our internal IP addresses.
I'm getting the following errors when I do service named start:
Error in named configuration:
zone localhost/IN: loading from master file master.localhost failed: file not found
_default/localhost/in: file not found
zone 0.0.127.in-addr.arpa/IN: loading from master file localhost.rev failed: file not found
_default/0.0.127.in-addr.arpa/in: file not found
I also tried changing the line directory "/var/named"; To the /var/named/chroot/var/named directory with the same result.
I'm thinking about installing a DNS server on Fedora 13 running bind. I looked around for available bind packages and found only these:
Now the first one contains bind utils the second one is for running DNS in a chroot env and the last one is a bind with some DB backend.
Does this mean that fedora 13 doesn't support/.provide "standard" bind server (I mean the one to run without chroot/without db backend) ? Or am I missing anything in my repolist which is :
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST Interesting ports on onkar (127.0.0.1): Not shown: 993 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
anyone come across a mysql driver for Bind that is already in RPM format? I know there is one that you can compile, but i was just curious if anyone knew of a MAINTAINED package that does that same thing?
==Edit== While i'm at it, does anyone know of a way to have bind call a STORED PROCEDURE, instead of directly querying a table? That'd be sweet. --Or, even having bind query a php file, or a webhost, would be good... I'm going to google that one now....
I'm having a problem getting BIND to start after doing the FC10->FC11 upgrade. Others have been reporting some bad symbolic links, but this isn't that problem. I've searched the forums here, but I don't see anything like this anywhere.
When DNS server is configured on Windows server, it will automatically detect and catch computer names and IP address. With Linux (BIND), I have to enter each clients manual under zone file. example (computer1 IN A 10.10.1.4). is there anyway to make Linux detect client automatically as windows does?
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [FAILED] [root@localhost ~]#
The problem is that I have set up a test installation with DHCP server and DNS server on Fedora 14 and want to set up dynamic updates from the DHCPD to the NAMED. The problem is that any attempts to make updates of the DNS server fails with a "SERVFAIL" error. I can not even update it through the NSUPDATE tool. This is NAMED.CONF:
I finally got the certs to configure: openvpn --config server.conf Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010 Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1 Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100 Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500 Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2 Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2 Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072] Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194 Tue May 3 17:26:27 2011 UDPv4 link remote: [undef] Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256 Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62 Tue May 3 17:26:27 2011 IFCONFIG POOL LIST Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here. Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use Tue May 3 17:54:25 2011 Exiting
I've tried setting up BIND from a fresh install. I've followed a few tutorials (all seem to follow a similar routine), but it doesn't appear to work properly.
This is what happens when I query my domain: [URL]
This is my named.conf file:
Code: // // named.conf for Red Hat caching-nameserver // options { directory "/var/named";
[Code].....
I've compared both files to examples and they don't appear to be any different - I'm at a loss as to what is wrong or where I should start to troubleshoot it.
i'm trying to get a bind server up and running on my opensuse installation but I'm having some slight problems, I've been looking for a solution to what is probably a silly problem for quite a while so I decided to come here.
i'm running fluxbox on my xubuntu 10.10. I'm just trying to set up the key file and the keys i enter will randomly not bind. Like for example:
# open a terminal Mod1 F1 :Exec x-terminal-emulator # open a dialog to run programs Mod1 F2 :Exec fbrun # filhanterare Mod1 F3 :Exec thunar # textredigerare Mod1 F4 :Exec notepad
terminal, fbrun and notepad works fine but not thunar. i've tried a million different combos of keys and modifiers and it seems totally random weather it works or not. sometimes what works one minute don't after next reconfigure.
When i run the original keys-file i get this log output:
Keys: Invalid key/modifier on line 66):
I get similar outputs when i change the keys-file for other numbers too but it doesn't seem to happen for every key that doesn't work.
I was wondering if anyone knows how to make a zone file for bind dns server that points "example.com" and all (by all i mean any) sub-domains to this 127.0.0.1 address. and i wanted to set up a virtual host in apache to use /var/www/eample/index.php for 'example.com' and all of its sub-domains.
I need to setup 2 BIND servers where I would need to configure automatic fail over where if one of the DNS server goes down other one should be able to pick it up.I was thinking to deploy VRRP solution with keepalived or vrrpd
Have basic LAMP setup on 9.10 box. I want to have a publicly accessible website AND I want to have phpmyadmin available. The only thing is I would rather not have the phpmyadmin interface available on the internet. I usually open a ssh port forwarded tunnel when I need to use phpmyadmin on this server. I want to add a directive to make phpmyadmin bind only on localhost. I have found the phpmyadmin config file in /etc/apache2/conf.d
phpmyadmin.conf -> ../../phpmyadmin/apache.conf
I have tried adding some LISTEN directives, but apache does not like my directives-- I am obviously not doing it right. I have looked for a bit on the internet and can't find out how to disable external access to a configured site in Apache.
I have searched some about Bind9 and have it installed in my server. Now I'm looking for a Tools like mysqlBind and I found unxsBind is the next version of mysqlBind (These tools help you config BIND DNS with MySQL). But the issue is: I don't know how to Install it in Ubuntu - there just say how to install with Centos.
I need a bind-server (I mean DNS server) with a SQL backend. As far as I have seen, the only viable option I have is to recompile bind9 with support for either MySQL or PostGre.
Link to this: [URL]with an additional
Code: apt-get install libpqxx3-dev
From some tutorials I have read, I see I need to recompile it to enable its SQL support.
But when I do it that way, I won't get any security updates, won't I?
So... Is there any bind server with SQL support in the repositories ? For that I don't have to worry about security updates...
I'm having an issue with a BIND server. After a restart, (or randomly, I assume whenever a cache expires,) when I try to resolve any domain I get a "Host yahoo.com not found: 2(SERVFAIL)" Eventually it starts working and works fine till the cache expires again;
I have 2 nameservers setup, a master and a slave. when I first setup the slave, I restarted bind9 and all of the zone records propagated just fine. Today, I updated one of the records on the master (no problems), but when I restarted bind9 on the slave it gave me a FAILED message. I checked the log and it was trying to receive notify's from my gateway address (192.168.10.1), and got "Failed to update from non-master". I did some research and found several people having a similar problem, but their slaves were trying to update from their own IP, not from the gateway IP. I tried their solution (allow-notify { 192.168.10.1; }) but all that did was allow the slave to restart bind without errors, it still doesn't update the records. It says "zone is up to date" but it's not.
However I just built a 10.10 server, installed webmin, vmware, and the server is working perfectly. I configured my bind 9 server using the latest webmin and on the server everything resolves perfectly to both the internet and lan. I have it set to 127.0.0.1, the server ip address is 10.1.50.25. However, it will not accept dns client queries in which they cannot resolve to the lan or internet. I have the dhcp giving out the dns server 10.1.50.25. NSLOOKUPS from the client show query refused. I know there has to be some setting or config that will allow clients to query but I am not able to locate it, and I am not totally knowledgeable of named.conf and been all through the webmin module and configuration settings.
I'm setting up an ftp server with lucid server. A lot of the folders that should be accessible via the ftp are in different directories (and can't be moved without a LOT of hazzle) and I have to either symlink or mount bind them to the ftp chroot dir. Now I'm wondering which one is the saver variant? My guess is mount bind, but I'm not that familiar with the internal workings of linux and vsftpd (plus for symlinks I wouldn't have to change/create any scripts, just create them once...),
I have 2 servers operating on my home network. One server hosts Bind9 and a few web sites. The other is an Ubuntu repo mirror that I recently configured (10.1.10.26). Inside my network, requests to the olyubuntu.nwlinux domain function as it should. However, external requests do not get forwarded. Instead, they end up at my DNS box at 10.1.10.25. Again, internal requests are forwarded correctly.Any red flags pop-up as to why this is occurring? Firewalls are not an issue.
I am planning to implement hardware load-balanced DNS servers. There will be one master and three slaves in the server farm. I will have two virtual servers associated with the server farm that will be listed as external nameservers for our domain.
BIND uses the list of NS records to determine the servers that need zone transfers. The zone NS records will not be the addresses of any of the real servers. How do I tell the master to do zone transfers to the real slave servers?
I just done a brand new install of fed12 and did all the yum updates. Apache seems to start ok and I always liked the http config tool but it won't run on Fedora 12. I downloaded and installed system-config-httpd.noarch 5:1.4.6-1.fc12 and it all went fine but when I try to start it I get the usual box asking for my root password, I type it in and press enter, the box disappears and then....nothing. If I run system-config-httpd in a terminal I get the same box asking for root passowrd but when I enter it I get a long scroll of text which ends with:
line 4: 2137 Aborted (core dumped) /usr/bin/python /usr/share/system-config-httpd/ApacheConf.py
I don't know what causes this. Is there any way to get the http config tool working?
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
I was recently requested to try and convert a running system to RAID level 1. I did not succeed in this task. However, I am still interested in accomplishing this task in a test environment.What I did was create a RAID device with a device missing e.g.
Once the RAID was up and running I created the /etc/mdadm.conf file so that it would activate the RAID device on boot. Once the device was created I copied all the data from the running root filesystem to the /dev/md0 device. The only directory that I didn't copy was the /proc directory. When I rebooted the machine I had a kernel panic and the system couldn't find /dev/root. I would greatly appreciate it if someone could provide some information/tips regarding the problem.
