etherape crashes on 11.4 while monitoring an interface on which services using the portmapper are running. It's fine with icmp, www and smb. As soon as I issue rpcinfo -p <host> from another machine or try to mount nfs3 or nfs4 shared, etherape crashes on the server . Did you experience similar issues?It occurs on the 2 64bit and 1 32bit machines running openSUSE 11.4. No problem at all under 11.3.
View 1 Replies
I have a big problem with my home router / server. The symptom is an alomst complete death. The other computers in the house can use the internet, i.e., the PC is not completely dead, but actually routes. However, it suspends all direct traffic: SSH becomes irresponsive, SMB shares disappear, and so on. It cuts traffic even with a VMWare guest it runs. I can ping it, but that's about it.The worrying thing is that it starts slowly. In the beginning it will start by cutting SMB pipes. It will then become very slow, to the point it won't execute a "shutdown" command.Then I sometimes have flood on port X, "sending cookies". That is certainly due to the P2P program, but cold a sustained flood affect communications on the virtual network adapter vmnet8?And then it enters this catatonic state with no special mention on the log.
View 5 Replies View RelatedUpgraded from 11.2 to 11.3 without any issues. However the newer version of Firefox keeps crashing and bringing down 11.3! It's a complete system crash with absolutely no warning, although it looks like 11.3 is trying to send the TERM signal before the pc shuts down.I have other browsers for my work, and both Opera and SeaMonkey work perfectly.Konquerer also works perfectly.
View 2 Replies View RelatedThinkpad Edge, Intel Version, OS 11.3, KDE 4.5.2after my notebook shut down (due to a low battery) when I was just using Knetworkmanager to add a new W-LAN connection, I can't start Knetworkmanager anymore. Terminal output is:
Code:
~> knetworkmanager
Connecting to deprecated signal
[code]...
If this is the right forum i don't know, but I'm having a problem which crashes my home server when writing to Samba. Googling and a quick search in this forum didn't help me any further. Is there anyone with a clue what to do?When I write several hundreds MB to my Samba share from a Windows machine the machine crashes (both with Win XP and Win 7). The problem is reproducible, although the precise moment (about 1 minute) or amount transfered data varies (about 300 to 800 MB). Small writes go well.Reading about 5 GB from Samba to Windows went without a hitch.
Hardware:
- Foxconn r10-s3 (includes Atom N330) with 2 GB RAM
Software:
[code]....
Firefox crashes each time I launch it under KDE. It does not crash under IceWM. Upstream Firefox binary does not crash, neither b13 nor RC1. GTK-QT Theme Engine is reported missing by GTK settings.
Name : MozillaFirefox Relocations: (not relocatable)
Version : 4.0b12 Vendor: openSUSE
Release : 1.2.1 Build Date: nie, 27 lut 2011, 15:19:51
Install Date: nie, 13 mar 2011, 21:29:21 Build Host: build21
[Code].....
I have installed OpenSuse 11.3 and I works quite well in my dell latitude xt2, even touch screen right out of the box.
I like Liferea for news feeds but when I try to read any feed from Slashdot it crashes after some seconds. It also happens with another source, etwinning.es.
I am a long time gentoo-user (~10 years). Just bought this new laptop and don't want to take the time to compile everything. During my search for a nice binary distro, I found the KDE reloaded CD, which I then downloaded. That was because I had a great hassle to find a Distro which supports the latest KDE, I was used by gentoo. Well, I am very impressed: Installation went flawless and the Distro is very up-to-date.
Well, now to one of my problems: I have this mobile internet stick:
Code:
ID 12d1:140c Huawei Technologies Co., Ltd.
which also gets detected as a modem. So far so good. When I now try to set it up, the KDE networmanager just segfaults badly... This is the output from the error report:
Maybe there is a possibility to set it up command line?
Code:
Application: KDE-Kontrollmodul (kdeinit4), signal: Segmentation fault
[KCrash Handler]
#6 0x00007f60ca29ea7a in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#7 0x00007f60ca2981c1 in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#8 0x00007f60de2bb87f in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib64/libQtCore.so.4
[Code]....
I have just updated to Lucid, and all seemed to go well except for one issue. etherape won't start when I run it as root. When I start it with a normal user, it starts OK, but I cannot access eth0 which I want to monitor. From the command line: peter@trinity:~$ sudo etherape
[Code]....
Anybody else get this message after a recent upgrade to testing (at least)?
Setting up portmap (6.0.0-3) ...
Starting portmap daemon....
There are RPC services which were registered with the portmapper before the configuration was changed. You need to manually restart them in order for the changes to take effect. Current registered services:
[Code]....
i used a gateay nv5214u laptop the wifi worked but the netstumber and etherape softare said the aetheros and broadcom controllers where invalid or incompatable but both software programs identified them?
View 1 Replies View RelatedAfter update 11.2 to 11.4 copy jobs from netware 5.1 volume to local disk linux system does crash after a couple of seconds. I might have to do if there a allot of small files in that job. If happend system reboot is required because unmount netware volume nor delete copied files to the local linux system is not possible. Recompiling ncpfs package not possible because error free source package ncpfs version 2.2.6 might not be availble.
Error message:
May 22 19:31:03 jaci kernel: [ 4694.764721] ------------[ cut here ]------------
May 22 19:31:03 jaci kernel: [ 4694.764730] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.37.6/linux-2.6.37/include/linux/dcache.h
[code]...
I've reported this as a bug (#507546), but it occurs to me that maybe others aren't having the same problems, so maybe it's an issue with the configuration of my machine. I upgraded to Kubuntu 9.10 (Karmic) from Jaunty. Ever since the upgrade, I'm getting a number of weird networking problems (though basic webbrowsing & email work fine):
1. I can't mount an NFS partition, one that has worked on this laptop with every previous version of Kubuntu, and one that still works on other computers. If I do
$ sudo mount /usr/lab
I get
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
So then I do this:
$ sudo start statd
and get this:
statd start/running, process 18709
Then this happens again:
$ sudo mount /usr/lab
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.:
but
$ sudo start statd
start: Job is already running: statd
so then I do this:
$ rpcinfo -p
and it hangs for something pretty close to 3 minutes and then says this:
rpcinfo: can't contact portmapper: RPC: Remote system error - Connection timed out
See also this:
$ ps ax | grep port
18017 ? Ss 0:00 portmap
18878 pts/27 R+ 0:00 grep port
Note that the 3-minute hang with rpcinfo -p also happens if I do not attempt to manually start statd first.
2. Whenever I try to print something from okular, the window freezes for about 3 minutes and then the print dialog comes up. The printers I want (network printers) are not shown in the list.
3. My department uses Retrospect (commercial closed-source software, sorry) for backups, and I haven't been backed up since I upgraded. The problem, again, is that when I try to start the backup client it hangs for about 3 minutes but then fails to come up.
4. And some new information not in my bug report: I've noticed that certain (but not all) OOo Impress presentations cause Impress to freeze for about, you guessed it, 3 minutes before the window opens. I just copied one of the troublesome presentations over to another Kubuntu Karmic machine, and it opens fine there. I believe that machine can also mount NFS partitions without trouble. it smells like some pervasive networking/communications problem specific to the configuration of my own laptop. But, I don't really know where to start. This has never been a problem before, and I don't think my networking setup is extensively tweaked
Here is my issue. I am running 9.04. I open the file manager (Nautilus) click the network to connect to my shares and the FM crashes. out put from terminal
Code:
wncamp@ubuntu:~$ nautilus
(nautilus:4313): Gtk-WARNING **: Theme directory 32x32/emotexs of theme Aqua-Glade_PNG has no size field
** Message: Initializing gksu extension...
Initializing nautilus-open-terminal extension
(nautilus:4313): Gtk-WARNING **: Theme directory 32x32/emotexs of theme Aqua-Glade_PNG has no size field
[Code]....
So whenever I turn on my EeePC with Ubuntu 10.04 on it, the network crashes after like 10 minutes to 45 minutes. Every time. Of course I have that horribly <snip> bug where the WPA and even WEP on my laptop are buggy because of 10.04, but it did the same when I was on 9.10 (but like 3-4 times a day instead of many times an hour).
Yeah, so when I connect to the network with my laptop, the network crashes. The wifi still works, I can detect the wireless network on all my computers (my Ubuntu one, Windows 7 and my girlfriend's Mac), but internet does not work. I then have to turn off router/modem, and it starts to work again. Then, a couple of minutes later, if the Ubuntu laptop is on, it stops again.
That's annoying because I can't really use my laptop on the internet because I'll have to restart everything soon. I've tried setting to WPA and to WEP and it happens with both. Same goes if I set my laptop to a manual IP address or an automatic one. I did some tests to be sure, and the network works without crashing for days if my laptop is closed, so the problem really is with Ubuntu, and as I said, it kind of always did that, but it was tolerable before.
I just started messing with the networking tools in Linux, and I've discovered that when I run an intense scan in zenmap on 192.168.1.1-254, the network crashes. By network crash I mean - All clients on the network lose connectivity.
View 12 Replies View RelatedI just did a yum upgrade from F13 to F14 to F15. According to /var/log/messages NetworkManager crashes trying to parse a VPN keyfile:
Code:
NetworkManager[2519]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ...
NetworkManager[2519]: ifcfg-rh: read connection 'System eth0'
NetworkManager[2519]: keyfile: parsing VPN Connection UDP ...
NetworkManager[2519]: <warn> caught signal 11. Generating backtrace ...
I'd like to remove this VPN config in hopes that NM can init and run, but I cannot figure out where this configuration is stored.
I was running F15 for a month now. After this week's updates NetworkManager crashes at startup and throws a backtrace. During reading ifcfg-<wifi network name> it was throwing some assert() failed of some hash is not null, but just as a warning. Later it was dying while reading ifcfg-eth0.
I removed all the ifcfg-* files in /etc/NetworkManager and /etc/sysconfig/network-scripts
Then NetworkManager started but at the moment I used the gnome applet to connect to a network it crashed trowing a backtrace (I have no debuginfo installed).
Then I also deleted ifcfg-* in /etc/sysconfig/network/profiles/default and /etc/sysconfig/network/devices, now the NetworkManager does not crash anymore, but instead gnome applet crashes when I try to connect to a network. grrr...
As a result I am still unable to connect to any network. Why so many copies (hardlinks?) to these config scripts? Now it is even worse: I rebooted the system and at the boot time when NetworkManager starts the boot process freezes. It says in VPN the Get() method is not implemented. I am unable event to switch a console and to log in to put the config files back (getty not started?).
The system will also crash when booting if it is not plugged in. However, this behaviour is not consistent. The crash is not really a crash so much as a complete system freeze, where not even the numlock light on the keyboard will turn on or off. I have to do a hard reset to get it going again.The last entry before the reboot in /var/log/messeges just shows eth0 link going down.
View 1 Replies View RelatedI have a Mandriva linux box connected by cable to my router. When I stream audio using this box it crashes all the wireless computers on my network. There is no effect on wired computers. All but the one computer are windows (xp or vista). The affected wireless computers are not able to even find my wireless network. I have to reboot the router to get them online.
View 1 Replies View RelatedSometimes, when browsing the internet with FireFox, the entire system freezes. The only thing I can do is moving the mouse pointer,I can't use the Run command or anything else.It usually happens after a stand-by.
View 9 Replies View RelatedAfter upgrading to KDE 4.6 (Factory repos) Amarok crashes every time I try to play a song. Changing between Gstreamer and Xine doesn't make any difference.
View 9 Replies View RelatedWhen i leave my computer for a moment i can see the screensaver completely frozen, nothing responds: keyboard, touchpad... I can preview the screensaver correctly, one with an ASCII aquarium.
What can be causing this?
Opensuse 11.3, 2GB Swap, fresh install
I just upgraded my AMD64 Phenom X3 on Asus M3A76-CM mobo from OpenSuSE 11.1 to OpenSuSE 11.2. The upgrade didn't go smooth, but it went through after some glitches. I posted this from the system running OpenSuSE 11.2. The problems I have encountered are the system crashed when I tried to Suspend to RAM and/or Disc. The display just showed the Penguin sideway with the bar went down to about 85%. BTW, why shows a Penguin sideway when the system is suspended to RAM/Disc? If one wants to show a Penguin sleeps, it should be standing and not laid sideway.
View 9 Replies View RelatedI've just installed opensuse 11.2 kde 64 bit and when I try to set a screensaver the whole program crashes. What's wrong with it?How do you fix the screensaver program?
View 4 Replies View RelatedI had to use pulseaudio as nothing else worked. Even now no kde system sounds and:
michael@linux-os4n:~/Dokumente> fgfs --aircraft=b1900d
Assertion 'm->n_waiting_for_accept > 0' failed at pulse/thread-mainloop.c:221, function pa_threaded_mainloop_accept(). Aborting.
Abgebrochen
michael@linux-os4n:~/Dokumente>
Every couple of hours OOo Base crashes - just closes the program of its' own accord.
Annoying enough in itself, but at least it usually recovers up to the last point I saved my work. The last time it happened though it didn't even recover to my last save point - it recovered to an old save point! So I have lost 30 minutes' work.
kate is my favorite text editor, and everything was working fine until recently. Whenever launching Kate, whether by opening a text file or by clicking the Kate icon, a dialog box pops up that KDEInit could not launch 'konsole'. In the background, a konsole window flashes briefly before disappearing.The baffling thing is, that if I click the "run Kate" shortcut, instead of the Kate shortcut, then Kate launches normally. I'm running 11.2 with all the updates installed
View 9 Replies View RelatedRecently OpenOffice has started crashing on me when loading the program. The splash screen will appear for a moment then the KDE crash handler comes up. Here's what I get when launching from the console:
slomojo@linux-yiyy:~$ ooffice
KCrash: Application 'soffice.bin' crashing...
sock_file=/home/slomojo/.kde4/socket-linux-yiyy/kdeinit4__0
I've tried deleting the .ooo3 directory in my home directory but that doesn't seem to help. Also, I'm running with Sun's JDK in case that makes any difference. I know that OpenOffice was working fine for me immediately after my fresh install of 11.3. I only use OpenOffice once every couple of weeks so I'm not sure if there was a specific update or anything that broke things for me.
I need to change attributes in my /etc/fstab file.
I cant change my fstab file because apparently Kwrite only crashes when accessed by Konsole in SU mode.
I type this input/output:
linux-mg28:/home/me # kdesu kwrite /etc/fstab
kdesu(13370): Session bus not found
KCrash: Application 'kdesu' crashing...
sock_file=/root/.kde4/socket-linux-mg28/kdeinit4__0
[Code]....
I have a dual XP/suse11.3 system. I even removed my old Suse along with all its partitions, leaving only the NTFS XP, re-downloaded the 11.3 ISO image, burned a new fresh install disk and reinstalled 11.3. I updated the software in YaST.
I still can't modify my fstab file. But I can locate the file in Dolphin and click it to open in a Kwrite window. Read only of course.
