I have set a scratch directory for Apache HTTPd writable by everybody.
Code:
drwxr-xr-x 2 wwwrun www 4096 11-24 22:28 /tmp/www
Code:
Alias /scratch "/tmp/www"
<Directory /tmp/www>
[Code]....
The request is reported in the access log but the error is not reported in the error log!
Even after I set LogLevel to debug!
I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
Just installed OpenSUSE 11.2 and I have to say it feels great.Only gripe I currently have is the NetworkManager that is starting up very slowly. When I have logged into KDE KNetworkManager applet says that NetworkManager is not running and hence I have no network connection. This is fixed if I start NetworkManager (as root) or just wait a couple of minutes. I have one ethernet interface only, no wireless
View 4 Replies View RelatedThis script is intended to allow you to simultaneously run a command on a set of remote hosts in a single gnome-terminal tabbed window. It runs it through screen so if it's a long process it's immune to network failures.
The command string gets built ok, but when it comes to executing the gnome-terminal command, it chokes with
Quote:
Argument to "--command/-e" is not a valid command: Text ended before matching quote was found for ". (The text was '"ssh')
If you copy/paste the "Running: gnome-terminal" line, it works as expected.
I'm pretty sure the problem is with the commandline variable expansion, but dont know what else to try.
Another thing I'd like to be able to do is keep the shell open after the command finishes. Right now, I just get "screen terminated" and the gnome-terminal tab says bye-bye.
Code:
Code:
At first log-in as user all was fine yesterday. Today I must have rebooted for the first time because it was all different. I tried to log-in to KDE this morning and it failed with some weird error messages that don't repeat here. It seems it all boils down to the fact that the /tmp folder has the wrong permissions. Whatever I try it always has the permission 755.
It is an encrypted /tmp permission mounted in fstab like this:
Code:
/dev/mapper/cr_sda2 /tmp ext4 acl,user_xattr,nofail 0 0
I can login as root in failsafe and look at the tmp folder:
Code:
ls -h |grep tmp
drwxr-xr-x 6 root root 4.0K Jul 20 12:26 tmp
So the wrong permissions. How to solve this?
I tried to go into rescue mode and change the permissions of the folder, but nothing helps. In rescue mode it is like it is in my OS 11.2 on another computer:
Code:
drwxrwxrwt 6 root root 4.0K Jul 20 12:26 tmp
A temporal work around is to change de permission as root and then I can login, but how to get the permissions right at boot up? What is wrong?
I tried ubuntu for a few weeks, but I couldn't get the nvidia drivers to work, I tried everything. So, I got sick of that, and went to download OpenSuse, which seems to be even nicer (..... ) I downloaded the 11.1 liveCD (gnome) from here. I nicley got the welcome screen, and the option screen (liveCD, check errors etc.). I chose LiveCD and it started booting, I got the splash screen with the loading bar, and after it completely loaded, the screen turns black with a lot of messages and at the end:
Code:
GdmLocalDisplayFactory: Maximum number of X display failures reached: Check X server log for errors.
Great, I hoped for better luck after Ubuntu..
My sys. specs:
Asus F3Sc 32bit
Intel CentrinoDuo
[Code]...
So far I've been able to get Samba to connect to the my WORKGROUP and I can see my Vista PC as well as my 3 hdd's but when I try and open the folder, any folder, C$; D$; or E$ I'm confronted with a user name and
password prompt. No user name or password combination that's associated with either machine, openSUSE or Vista will grant me access. Why am I seeing this prompt and what I would really like to know is can it be
disabled all together? Otherwise, what user name and password does Suse want? Do I need to tell Suse in a terminal a user name and password?
how to get the username logged in a given IP in a network?
View 1 Replies View RelatedHow can I (as admin) find out when a certain user e.g. "karl" most recently logged in and most recently logged out of a system?
View 2 Replies View Relatedlogging in a server through putty in the same network when i executed last command its showing system ip logged in time and logged out time the output as followsthis is my system
oot pts1 xx.xx.xx day month date time in time out timeand similarly am geeting other than this likeroot :0day month date time still logged in this is from more than 3 days its logged in
This is the set up I have: PC downstairs by a tv, with 3TB of storage containing my media, connected to the tv too. HTPC upstairs by another tv and connected to it. A few laptops and other desktops around the house which are windows based
I want the downstairs pc to act as a file server and to run my torrent client, it is running Ubuntu desktop version and has xbmc installed too for use with the tv. The upstairs htpc has xbmc live on and will access the media from the file server. What I am looking to do is to be able to log into my ubuntu machine remotely from a laptop running windows so I can manage the files and add torrents for download etc, but for this to be a complete remote session, rather than taking control over what is already being shown on the downstairs pc, like VNC does in windows.
I have two user accounts set up on the main ubuntu machine, the admin account and a media user account which is set to go straight to xbmc after log in. Also how can I make sure that the media drives are automatically mounted to allow access if the admin user is not logged in?
I have recently installed Opensuse 11.4 on my desktop. And also upgraded my gnome-2 to gnome-3. Its works nice and I am enjoying it. Only the biggest problem I am facing is, if I lock the screen and leave my desk for couple of hours then user gets logged out automatically. Which is resulting all the documents and applications gets closed. I am unable to work in my desktop now.
View 5 Replies View RelatedI have just installed openSuse 11.4 on my Acer Aspire 5738Z. When I click on the action button included in the bottom panel, I expect to open a windows asking me if I want to shut down, restart, or log off. But unfortunately, when I click on it, I am not offered any option and I get immediately logged off. I removed the button from the panel and installed it again, but it still dysfunctions.
View 4 Replies View RelatedI'm looking for a user-friendly way to change the password of a user that is *not* currently logged into the machine. We have a machine that is used by a number of users with a low level of tech savvy. The machine gets logged in as a generic user which works for most purposes, but due to a management requirement, we need Firefox to be run under an account set up for the individual user. I've gotten that bit to work fine, but what I can't figure out is a friendly (GUI) way to allow users to change their own password while the machine is logged in as the generic user. I would like to use gnome-passwd, but I've been unable to figure out how to get it to run for a user other than the logged-in generic user.
View 7 Replies View Relatedsome days back i have installed VLC player. It is working fine when logged in as any other user than root user but not when logged in as root user.
View 2 Replies View RelatedI have installed edu life suse 11.3 and when I logged in with GNOME 3 preview .. screen blincked 3-4 time and there was no panel after that I automatically logout from gnome3 environment. How to fix it ?
View 3 Replies View RelatedOS Fedora 10.
On shutting down teh machine I see two items are reporting as failed.
Stopping Kernal LOOPS: Failed
Stopping PC/SC Smart card Daemon PCSCP Failed.
I do not see any problems with any of the start up items.
The above failures occur if I use the machine for a while or just boot it and then at the log in screen just shut it down.
I got out of kde used soma a cli radio station player, got back into kde and sound was screwed up, couldn't restart sound had to reboot, thought it was soma problem. Got out of kde, did nothing for several hours, got back into kde and sound was screwed up, couldn't restart sound had to reboot. Had kde running couple days, xmms stopped playing music, no matter what I tried with preferences I kept getting no sound or sound card not configure properly, had to reboot. Is there a sound log or something that might hint at what's going on?
I also found posts that say to rmmod snd_atiixp_modem because it clobbers the regular snd_atiixp module but snd-atiixp-modem is not loaded. Toshiba Satellite M55-S1001 (Celeron M 1.6 GHz, 2 GB RAM, 60 GB HDD)
[Code]...
I'm getting silly stuff from this when I try compiling commoncpp2. With the SlackBuild & version 1.5.3 I get
Code:
Making all in src
make[1]: Entering directory `/tmp/build/tmp-commoncpp2/commoncpp2-1.5.3/src'
[code]....
I currently have a Raid0 setup with two disks and I have no problems whatsover. I currently bought 3 brand new 1B drives and I set up Raid5. I created the array and everything works fine. I formatted the array and mounted it. When I tried to copy 750gb of data over my new array, it copies fine at some point and it fails. After reboot, I am seeing the array inactive. I tried everything and could not get the raid back active status. I have removed the array and recreated again, formatted again. When I started copying my files over, exactly same thing happened.
View 3 Replies View RelatedI removed the hard disk from my EeePC and used it with Debian Squeeze on a 16GB SD card. It wasn't fast, but it was all solid-state, and that's important to me. However, lately it had started misbehaving. When recovering from sleep it'd lose all fonts (everything was displayed in squares), files could not be found and programs would stop working, and in a short time the system would become completely useless. Then after a while it started doing it regardless of sleep mode; I'd turn it on, do something, and it would work for a while - or maybe not - and then screw up. As an example, I noticed that unmounting partitions from gparted would do it almost always, but unmounting them from shell wouldn't.
Sometimes simply opening the browser would cause this weird crash. When shutting the system off it'd complain about the ext4 partition, though I don't remember exactly what it said. I thought it was Debian that had somehow screwed itself up (or I had...), so I wiped the card and installed Ubuntu Netbook on it. I was quite surprised to see that that, too, failed in the exact same way. I'd blame the SD card, but the strange thing is, the data on it is perfectly fine. In fact, I temporarily fixed the problem by reinstalling the hard drive, dd-ing the whole SD card on it and then expanding the partition over the unused space. From this setup, the system works perfectly - using the same data from which it used to fail when running from the SD card.
I'm having problems with my php 5.3.3 installation when trying to access remote domains. The problem only happens when the PHP scripts are run via Apache 2.2.15. The problems appear to affect all functions that might access a remote domain (e.g., gethostbyname, file_get_contents, curl, etc.). Basically, pHP scripts can't resolve a remote host when run via apache.
So I thought I might try to reinstall curl (I'm OSX 10.5.8, btw). I ran configure and make fine and then make test reports the following:
Code:
TESTDONE: 485 tests out of 485 reported OK: 100%
TESTDONE: 586 tests were considered during 283 seconds.
TESTINFO: 101 tests were skipped due to these restraints:
[Code]....
i just migrated from fedora to debian, and i already love this system. it only seems that i am facing a serious problem with this graphic card.running on debian 8.3.booting my system, i do get this message:
[8.167619] [drm:radeon_pci_probe] *ERROR* radeon kernel modesettingfor r600 or later requires firmware-linux-nonfree.
after that the system seems to run normally except of the fact that it doesn't look well and i cannot set the appropriate resolution for my monitor.
lspci -nn | grep VGA output:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850] [1002:6739]
already tried both, the open source and the proprietary drivers, and both cause serious problems.
i tried to install the proprietary driver following these instructions: URL...
after restarting the system i get a black screen with a blinking cursor at the top left corner, and that's it.
then tried to install the open source driver following these instructions:URL...
but after restarting the system my monitor goes into some sort of a "sleep monitor mode", and that's it.in both cases i wasn't able to boot the system through the recovery mode, so i didn't know what else to do and re-installed the whole system each and every time i tried a driver.let's say i have installed the system like 5 times in the past 12 hours.
my laptop windows 7 64-bit intel core i5,4GB ddr3 RAM 500GB HDD. hard Drive partion -- c-drive:150GB D-Drive:150 GB remaing 160 GB not allocated but when i install fedora 12 . it says create boot/efi partion, root partion i dont get it
View 7 Replies View RelatedI'm using a RHEL5/Centos5 variant. After struggling with various 2 TB hard drive failures, I started using the Hitachi Deskstar and Ultrastar models, and had none of the earlier green feature related or QA problems I had with all others. However, I began seeing SATA controller freezing under heavy loads, like large rsync mirror operations. My controller is an on-board ICH7R running in AHCI mode. The symptoms are that the drive goes off line and begins to log thousands of SMART errors for Spin-Up Retries. Analysis confirms that the drive is 100% OK after, except for the huge SMART log. This happens on two servers, and multiple drives. Changing the drive to 1.5 Gbps interface speed reduces the problem greatly but does not eliminate it.
I'm working with Hitachi engineering on this, and their only theory is that it has to do with "non-zero buffer offset". Apparently this is a feature of NCQ to receive data out of sequence, and Hitachi says that ICH7R is supports NCQ but not this feature. I am told that BIOS is supposed to filter offending commands but BIOS vendors sometimes err. An alternate is to filter them at the driver, which I believe is libata. Does anyone know anything about this issue? Where might be a good place to make a query about this, with regards to libata? I've contacted the motherboard vendor about the BIOS issue, but I'd like to look into libata also.
I'm running Kubuntu 9.10, and I like it (yay!) But I've been having issues with sound. Especially under system load I've been having an error where it says that the device analog 9xxx has failed falling back to digital, then it says almost immediately device digital 9xxx has failed falling back to analog. At this point any programs playing sound seem to retain that ability as long as I don't close them, but any programs I open have no sound. This applies to webpages and flash, as well as internal programs. I have also been having issues with video, no errors, but the video skips and freezes. Flash video occasionally crashes and any flash games that submit data (e.g. high scores) to a remote system crash my browser.
I end up having to pause the video and move it back several frames, then wait as if it had to load from ..... for a while, and it will run again for some time. My hardware is a dell inspiron e1505 on which the only things I have done are to replace a broken monitor and upgrade the ram (that is, after I broke windows too many times and converted to Linux. I don't have more error data for you, I simply haven't had the foresight to stick it into a text file yet. The error is displayed in the Notifications and Jobs button in the system tray, which is not well suited to copying and pasting, and I'm admittedly unsure as to how to find the error. I learned BASH on Sun unix at my local college and I still haven't quite learned all of how to speak ubuntu's terminal.
I am trying to disable accounts after 5 unsuccessful login attempts. I am following the guidelines in this article:
[URL]
This is on an Oracle Enterprise 5.4 box, which is essentially RHEL 5.4 Here is what my /etc/pam.d/system-auth looks like:
--------
#%PAM-1.0
# This file is auto-generated.
# User changes will be destroyed the next time authconfig is run.
[code]....
Unfortunately, the account does not seem to be locked or disabled. As root, runninng 'su test2 -c <some-command>' always sucessfully runs <some-command>, and leaves the failed attempt count at 6. /etc/shadow does not have an * or ! anywhere in the encrypted password for the 'test1' user.
What am I doing wrong? I thought that with the max attempts set to 0 in faillog, that the deny= parameter would be used. I thought I should be using su <user> -c <command> from the root account to test if the disable feature is working.
I need to scrape logfiles and do some pattern matching for a series of hardware and system faults;
For example:
Network interface down / up
IO errors
Out of Inodes
Out of Diskspace
Memory Errors
Power Failure
When the appropriate Strings appear in the log (assuming /var/logs/messages)Then a trap will be sent. (Customer specific SNMP solution) So what I need (I think) is a list of the strings I need to match.Has anybody any idea where I can find a list of strings which will definitely appear in the log - RHEL5 ?
I am currently having problems with my RAID partition. First two disks were having trouble (sde, sdf). Through smartctl I noticed there were some bad blocks, so first I set them to fail, and readded them so that the RAID array will overwrite these. Since that didn't work, I went ahead and replaced the disks. The recovery process was slow and I left things running overnight. This morning I find out that another disk (sdb) has failed. Strangely enough the array has not become inactive.
md3 : active raid6 sdf1[15](S) sde1[16](S) sdak1[10] sdj1[8] sdk1[9] sdb1[17](F) sdan1[13] sdd1[2] sdc1[1] sdg1[5] sdi1[7] sdal1[11] sdam1[12] sdao1[14] sdh1[6]
25395655168 blocks level 6, 64k chunk, algorithm 2 [15/12] [_UU__UUUUUUUUUU]
Does anyone have any recommendations as the steps to take ahead with regards to recovery/fixing the problem? The disk is basically full so I haven't written anything to disk in the interim of this problem.
I need by searching this site so I haven't had a need to sign up since I can't really help anyone as of yet. With that said here is my problem: I'm running a VPS with CentOS RHEL 5 host-in-a-box, I just did a rebuild of the server and after a day or two pure-ftpd and sshd unexpectedly close out any incoming connections. I am the only one that uses ssh and ftp so I'm not sure what the problem could be. I checked the logs and there is nothing to do with not being able to bind on the address.
I tried connecting through ssh in verbose mode and it connects to the server just fine, but drops the connection before it asks me for my key pass phrase. If I enable password access it will drop before it asks me for it's password. I've tried restarting sshd and ftpd. I've tried rebooting the machine. I've tried google, but this problem seems to need a little more specific trouble shooting. I can get in through console access, but that doesn't help me much when I need to transfer files.