OpenSUSE Install :: Changing Password User That Is Not Logged In?
Apr 15, 2010
I'm looking for a user-friendly way to change the password of a user that is *not* currently logged into the machine. We have a machine that is used by a number of users with a low level of tech savvy. The machine gets logged in as a generic user which works for most purposes, but due to a management requirement, we need Firefox to be run under an account set up for the individual user. I've gotten that bit to work fine, but what I can't figure out is a friendly (GUI) way to allow users to change their own password while the machine is logged in as the generic user. I would like to use gnome-passwd, but I've been unable to figure out how to get it to run for a user other than the logged-in generic user.
I did an upgrade install. So, I didn't get the prompt to make one. How to change the admin password? I think I know how I can change my username and password.
I went to YaST>Security and Users>User and Group Management and changed my username. Now I can't do anything (open home directory, start application, login, etc). I tried changing back the username by going to YaST at init 3 and changing back to the previous username.
I hope I am in the right forum. I have a question about restricting users from being able to change their own passwords in Fedora 10. In Fedora 6, I was able to do this by using passwd with -n and -x flags. If I would set the -n value greater than the -x value, then the user would not be able to change his/her own password. If I do this in Fedora 10, this no longer works
I want to know, how does changes happened in the encrypted password in /etc/shadow file , when user changing password . because user doesnot have access on that file
My problem is that I cant "rewrite" older password to new. It looks like I do:
Changing password for user johny. New UNIX password: Retype new UNIX password: passwd: all authentication tokens updated successfully.
all looks OK but after set up new password I can log in using OLD and NEW password. It's very unsecure for me. So in fact I cant change password and it looks like centos create next password to one accout and one account have more then one password... how can I prevent it? pls help me couse its very unsecure in my case.user looks in file shadow /etc/shadow like this:
I have recently installed Opensuse 11.4 on my desktop. And also upgraded my gnome-2 to gnome-3. Its works nice and I am enjoying it. Only the biggest problem I am facing is, if I lock the screen and leave my desk for couple of hours then user gets logged out automatically. Which is resulting all the documents and applications gets closed. I am unable to work in my desktop now.
I am not sure if anyone here has any experience with Kaspersky Anti-Virus for Linux but my problem relates to that product.
I am running 11.2 openSUSE and after installing the latest version of the Kaspersky product in question, I went ahead and restarted the machine. At the logon screen, when clicking my user name to log in, the password box would not display.
I tried clicking on the other option and trying it that way and after putting my name in the username box, the machine just started thinking and thinking and nothing happens.
I also tried logging in through terminal service but it would not recognize my password to be correct.
I really need to log into my username since I have important files on that Linux partition. I tried mounting this partition in Windows since I have a dual boot setup but I can only view the folders of the partition and not the contents.
I am trying to be a super user in terminal but I can't. I am sure that I type the correct password, I check also the caps lock button and the language. Also I can't go to the yast. note that the root password is exactly the same as user password
Code: nobani@linux-m9c6:~> su Password: Permissions on the password database may be too restrictive. su: incorrect password nobani@linux-m9c6:~> I am using KDE 4.3.5 on openSUSE11.2
Today I have installed Linux SUSE 11.2 . At installation, I was asked for user-name and password. I edit this correctly.
At the end of the installation, the system reboots until the mask 'user name' and 'password' will be displayed. When I edit my user-name and the password the system said, that the login is not correct.
First, I think, I have forgetten my password an do a new installation of Linus SUSE 11.2 . Whatever, the same problem ist still there.
hello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
But I've gotten as far as getting davfs to work on RH Linux. However, on SuSE I'm logged in as root, but when I issue the mount command I'm getting "user davfs2 does not exist". (I was getting "group davfs2 does not exist", so I created the group (groupadd davfs2) then added the user davfs2 to the new group by following the instructions at The Nerdrium : Linux : Creating Groups.
The command I'm issuing is: mount -t davfs http://.....
I get challenged for credentials, but after I enter them I get the "user davfs2 does not exist" message.
I recently got a new external drive and backed all my files up on the new external: movies, music, docs, etc. Now all my files have permission rights to the root only. I was able to change this by open up nautilis from a terminal in root and change the permission on the whole drive to my current user so I can access the files, copy & delete the files. I wanted to change some music file information in Kynamo this morning and was not able to since all the individual files still belong to the root. How can I change this permission issue without having to change each individual file?
I am trying to login to a redhat server via VNC. This used to work until I reloaded the box. Although I had previously logged in directly to the box, then I could vnc to it remotely. The service is running, netstat states the ports are open and listening.I can ssh to the box, and ran the usual commands to start the services.So my question is. Do I need to have a local user logged in before I can VNC, if so how can I do that via the command line.If this is not required for a local user to be logged in, what am I missing. Other than VNC, which other services do I need to start.
Since today the keyboard doesn't work. I can input username and password but after logged in I can't work with the keyboard. It seems locked. The mouse works correctly. If I boot with Windows the keyboard works correctly.
I work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
I recently installed FC14 as my server and is able to ssh and vnc into the server when locally logged in. If i logged out (at login screen) then i cant ssh or vnc into the server. It is pointless to have a server if i am not able to remote in via ssh and vnc.
How come you can shut down or reboot from the gui w/o needing root privelages, but if I enter "shutdown -h now" on the command line I am met with "shutdown: Need to be root".
Also- somewhat unrelated to my first question- I recall when I first started Ubuntu-ing, if I wanted to shut down or reboot while another user was logged in, I'd need to enter my password- but it doesn't do that anymore. Two users can be logged in with multiple applications open, and if I reboot or shutdown, it just goes for it? (using 9.04, for now...)
when I log in, I can move the mouse, but nothing else. The whole user interface is unresponsive and absolutely no keystroke works. It is probably not because of my hardware (hp 2710p) because logging in as root (with only slightly different Gnome configuration) does work well. I assume it is because of some error inside the Gconf. There is always an error when starting Gnome that an entry could not be read, including some bunches of ~30 question marks. If it is useful, I can give you the whole message literally.
I haven't changed data inside Gconf, but I did have it open when I was installing a program, and then the console did show the message with the question marks for the first time (while processing some "trigger" post-install). I think the program I was installing was drapes (for changing desktop wallpapers in Gnome). Strangely Gnome did startup correctly afterwards for a couple of times (always showing the above-mentioned error). I have no idea what change made it suddenly stop working yesterday.
The differences in Gnome configuration between the working root and the unresponsive user account are, as far as I can tell from memory: changed theme (elegant-brit), wallpaper, fonts, globalmenu in the panel, installed - added to panel - uninstalled drapes.The rest is the same for the root account. I can still log in to the shell as the normal user, but "startx" leads to the disabled graphical interface. As I said, the graphical interface works well when I use the root shell. I can't access the internet from the user shell unfortunately (if I need to, I will figure out how to set up wlan in the shell).
I have a very annoying problem with my Lucid (installed with ubuntustudio's alternate dvd). Two out of four times when I log in my account has some restrictions. I can't mount devices on nautilus and the shutdown button won't be displayed. If I log out and log in I see the restrictions again. Only restarting (with "sudo shutdown -r now" or so) may give me a normal session. On the console works everything normal. I mean i can sudo with my password.
I am running a mail server with combination of dovecot,sendmail and squirremail as web client. I want to change the password of the user if he/she not logged in for 21 days.
I want to run zypper without being asked for the root password. So I added the commands to the sudoers file:
Code: # User alias specification User_Alias ADMIN = XXXX #note: this is not real username. # User privilege specification root ALL = (ALL) ALL ADMIN ALL = NOPASSWD:/usr/sbin/vpnc ,/usr/sbin/vpnc-disconnect ,/usr/bin/zypper ref ,/usr/bin/zypper up
But I'm still being asked for password. I should note the the vpnc commmand is working as expected.
I installed IPlist earlier today on my main/admin account (which I only use for installing programs. I don't use this account daily.) and everything was fine. When I logged into my every day account and tried to load the program, it prompted me for my password. When I entered it, I got this message:Quote:Failed to run /usr/sbin/ipblock start_gui as user root.The underlying authorization mechanism (sudo)t allow you to run this program. Contact the system administrator.Does this mean I am not able to use this program on this account, or is there a way around it? I'm new to Ubuntu so forgive me if I'm asking the obvious. I looked around and couldn't find an answer. I really don't want to use my admin account for daily activities, but I also really want to be able to use IPlist
on my netbook I've tried to make possible for my user to shutdown without needing a password. battery could run low when I'm not in front of it. Editing sudoers has allowed my user to shutdown the system, but Gnome still prompts me for the root password whenever root is logged in too. That's usually the case, because to avoid entering the root password multiple times whenever I need elevated privileges and not wanting to cache the root password, I keep a Root Terminal always open.
Is possible to send a message (popup window or something) to local user logged into X (xdm, fluxbox) from console ? For example: user1 is logged and using X/fluxbox, user2 logging into the same box by ssh to console. Now - what user2 have to do to send message to user1 ?
I am trying to see the last 5 mails in a single window that the rootuser has sent to a particular normal user.However,I am not able to do so.Is there any command that can display the last 5 mails in a single window sent to a particular user?
I use tomcat as my server platform in Ubuntu for a war file. I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
Here's the link:
[URL]
In order to get users'ip, in jsp, use request.getremotehost() or request.getremoteaddress() by editing the jsp file. I wonder if there's some open source software to use for these two purposes.
