OpenSUSE Network :: NetworkManager Stopped Working After Encrypting The Disk ?
Jul 22, 2011
I managed to kill KNetworkManager today and I'm not sure what I did. This is a netbook running openSUSE 11.4 with all updates applied and KDE 3.5 (from the openSUSE repository). Normally, I use knetworkmanager to connect to the Internet. Everything was working fine this morning and today I decided to apply whole disk encryption (using cryptsetup and luks) to it.
So, I backed up the files, encrypted the partitions, made some adjustments to /etc/fstab and /boot/grub/menu.lst, and copied the files back. Everything is working fine, except for knetworkmanager. When it goes to connect, it starts off with the "gray Earth" (to represent no connection) and then it switches to the "connecting" icon for a fraction of a second, and then it's back to the "gray Earth". Looking at the output of iwconfig, it hasn't connected to the router at all (the essid is blank).
The connection works fine using ifup. I tried using cnetworkmanager (the console version) and it spits out errors like this:
Code:
View 9 Replies
ADVERTISEMENT
Aug 5, 2010
I've run into a situation where knetworkmanager tells me networking is disabled. If I switch to the ifup method in Yast then I can get online but when I switch back to user controlled knetworkmanager tells me that networking is disabled.I've actually had this happen twice.The first time I somehow managed to get it working again (I thought it was by right clicking on the icon in the system tray). This time I don't see the same option.Has anybody got any suggestions on how to get knetworkmanager working again.
View 9 Replies
View Related
Apr 11, 2011
On fresh install of 11.4 everything worked fine, but after some updates networkmanager stopped working properly on my netbook (intel atom n270 based).When I log in, network manager shows that networking is disabled and I can't connect. Checking/unchecking the checkbox does nothing. All settings in Yast are OK.To make it work, run "/etc/init.d/network restart" and then plug in the wire OR (in case of wireless connection) I restart network from console, unchecck and check the checkbox in networkmanager and only then it starts to work as it should.
View 9 Replies
View Related
Jul 13, 2011
I've had 11.4/KDE working pretty well on dual boot Asus G73SW for a few weeks now. Only issues were the FN-* functions that control keyboard lights and whatnot but no biggie since the essential worked.The last couple of days the update notification was indicating 1,201 updates to be made. Yeah it seemed extreme but I googled around and checked the forums and there was nothing related. I figured I might be missing some packages since I installed from the live KDE CD (still 1202 updates!!!???). So I updated. Big mistake!!!!! Ever since NetworkManager cannot connect to the internet, be it wired or wireless.
Initially it could not even see my home network but it picked it up after I removed the plasmoid from the panel and reinstalled it. However it doesn't respond when I click the network icon and still no connection.I managed to get eth0 working with ifup but not wifi. The last part of network manager log file is quoted below. I can send the whole thing to whoever is interested. I can't make sense of it but maybe someone on the forums can.
Code:
Jul 13 11:09:08 linux-yy10 NetworkManager[1649]: <info> NetworkManager (version 0.8.9997) is starting...
[code]....
View 9 Replies
View Related
Apr 13, 2011
After 2 years of good service and after I've changed IP addresses in the router from 192.168.1.2 to 192.168.1.102 my autofs stopped mounting my NAS with NFS. That was the only change.
View 8 Replies
View Related
Sep 18, 2010
over the last couple of weeks, firefox has asked to be upgraded a few times. shockwave flash has also asked to be upgraded. sometime last week after upgrading shockwave flash all video stopped. so i have no videos, video in webpages just shows a grey box, with a light grey arrow.i have been very busy so i have taken time here and there to check the internet for solutions. there appear to have been problems with macs' and a lot of the problems appear to be from august 2009 onwards,am not sure it is the same problem.i am running opensuse 11.1mozilla firefox 3.6.10shockwave flash 10.1 r82 is enabled
code:
uname -a
gives me:
[code]...
View 9 Replies
View Related
Sep 1, 2011
After a recent flash update it has stopped working in firefox 6 and konqueror. I am using 11.4 kde 4.6.5. Never had a problem with flash till now.
View 4 Replies
View Related
Jul 20, 2010
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
[Code]...
View 4 Replies
View Related
Jul 6, 2010
I got connecting to our NAS over NFS working perfectly. Direct NAS Reading & Writing - How? But on Saturday I found out it had stopped working. For no apparent reason, not straight after an update either I don't think. When I manually try to mount --verbose:
mount 192.168.100.14:/IHL /mnt/IHL --verbose
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Tue Jul 6 14:48:32 2010
mount.nfs: text-based options: 'addr=192.168.100.14'
mount.nfs: Unable to connect to 192.168.100.14:111, errno 111 (Connection refused)
mount.nfs: mount to NFS server '192.168.100.14:/IHL' failed: System Error: Connection refused
Corresponding fstab line that used to work just fine. 192.168.100.14:/IHL /mnt/IHL nfs auto 0 0 For now, I can drop back to Samba but this is a PITA as I can't open OpenOffice documents and write to them directly on the NAS. The fact smb://192.168.100.14/IHL works proves networking wise we're cool too. There is no firewall between this PC and the NAS, the NAS is instructed to allow my PC's LAN IP full access. OpenSuse's software firewall has been told to allow NFS Client too. Why would this setup break out of nowhere? How can I debug this best? I see nothing relevant in /var/log/messages How can I get it to work again? A hopeful reboot didn't do its usual wonders...
View 3 Replies
View Related
May 28, 2010
I'm wondering why the NetworkManager log file would show an entry whenever an external usb drive is plugged in. It's obviously HAL related but looking at the various files of hal, udev, syslog shows nothing relevant.
Here's the entry just after the usual info about the network card:
May 28 08:35:16 doomed NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
May 28 08:35:16 doomed NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete.
May 28 08:35:16 doomed NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
[Code].....
This is an opensuse 10.3 with final updates system.
Any search here about the log shows nothing but actual network problems.
View 5 Replies
View Related
Mar 31, 2011
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies
View Related
Aug 21, 2011
since a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies
View Related
Mar 7, 2010
i dont have networkmanager. what can i do?
View 2 Replies
View Related
Jan 1, 2010
Currently I'm using Ubuntu 9.04 and when I installed it I got a question if I want to encrypt disk contents. I answered no. Now I think it is good idea to have such possibility. So is it possible to have the same encryption on running system ?
View 14 Replies
View Related
Apr 26, 2011
I upgraded to 11.4 from 11.3. What I tried:
There is that twisted "N" symbol: clicking on it gives no response (but the mouse cursor is changed when over the menu bar).
Sometimes (not always(!), no pattern found when) the little cell phone symbol in the tray is there although hidden in a sub menu. There I can activate networkmanager but I then get a popup saying that network is already running do I want to start it by hand or automatically? Nothing happens clicking on either choice.
Starting from command line has no visible effect and no errors printed.
How should the connection be established? Where can I enter my parameters? (This is a 3G mobile connection).
View 12 Replies
View Related
Jan 9, 2010
I am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
View 8 Replies
View Related
Jan 26, 2011
I seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
View 9 Replies
View Related
Jan 11, 2010
I find that the new KDE4 notification icon is not very easy to see.The "progress" indication is a microscopic vertical progress bar, that I find very difficult to interpret.OK, it is a minor annoyance, but I do find that I regularly try to use the network on my laptop before the connection has been established.It is also a regression over the icons in 11.1 or before, which were very clear.If people agree with me on this point, I will post a bug, with the aim of getting a clearer icon.
View 1 Replies
View Related
Jan 28, 2010
I installed OpenSuse 11.2 LiveCD. I'm currently running patch download and installation so maybe this will fix my problem. When I use NetworkManager, WPA or WPA2 are not an option. I'm give four encryption methods (WEP 40, WEP 128, LEAP and Dynamic 801.x) Is this a problem with my Thinkpad T23's 802.11b wireless card? Do I need to install a patch?
View 4 Replies
View Related
Mar 15, 2010
I have a successfully connected VPN connection. When hovering on the networkmanager applet it show beside the wireless connection also the connected VPN. The icon also changed from staircase-bar to staircase-bar with forelock. Oh yeah I'm using GNOME desktop.However when right-clicking on it and choose Connection Information I can only found tab for the wireless connection. How can I have the information tab also for the VPN connection, showing like IP address and gateway used?
View 1 Replies
View Related
May 2, 2010
I just tested Networkmanager on OpenSuSE 11.2. I tried with my wired connection and it works.
I thought I test to connect with network sharing with my Android phone. The Android phone connects according to Networkmanager, but I'm not sure if it actually works as the wired connection is still active.
I tried to figure out how to disable the wired connection, but eventually gave up and just pulled the wired network plug.
But surely, there must be a way to disable connections from Networkmanager?
View 2 Replies
View Related
Apr 15, 2011
Installed opensuse 11.4 and wireless network started automatically. Then I changed the name of the computer in YAST, and restarted. Now I cannot get NM to start automatically at boot. The red X shows up on the panel app Network Management and settings buttons do not activate the wireless device. I have to start NetworkManager from the command line. After about 30 seconds the wireless hardware symbol turns on and then I can connect to the network.
HP Pavilion Dv7
opensuse 11.4 64bit AMD
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
KDE desktop
[code]....
View 7 Replies
View Related
Jan 6, 2010
How can I enable the network with Networkmanager WIHTOUT logging in in OpenSuse 11.2?
If I define a connection for ethernet the System connection is greyed out. I want to use Networkmanager because I have also wireless connections...
View 9 Replies
View Related
Jan 15, 2010
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
View 4 Replies
View Related
Jul 11, 2010
I'm currently struggling with the following problem: Connecting to a wired network with NetworkManager (0.7.1) is no problem at all: Everything is set up automatically, including the default route:
[Code]....
When I now add the route manually it works. But as soon as the cable is plugged in, the NetworkManager overwrites the routing table entry again (which makes it quite annoying). Does anyone know a way to avoid this behaviour?
View 6 Replies
View Related
Jul 23, 2011
i've been able to narrow down a freezing issue on my laptop, down to NetworkManager when i have a cifs share mounted in fstab.removing the cifs mount, or using 'ifup' method appears to fix the issue.the problem is when my laptop resumes from sleep, and when using NetworkManager with cifs share, then i get a 20second freeze when using the launcher while the network sorts itself out. this happens on either wifi or wired connections. this freeze only occurs when using the Launcher for the first time after resume. if i dont use the launcher then everything is fine untill i do (ie: i have network access and desktop shortcuts work fine)
View 1 Replies
View Related
Aug 2, 2010
I have posted this in networking, but perhaps it should have been here. Can anyone give me a clue on how to get my networking to work again? I don't care about sound.Last night I was trying to get my printer working, and when I rebooted, I lost networking and sound.I am currently booting on a live CD, and sound and networking are fine-- so it can't be a hardware issue (obviously). I must have inadvertently broken something, but I can't figure it out.
I have tried restarting networking, but it doesn't respond-- it says stop/waiting or something like that.I can't access the sound preferences-- it says waiting for sound to respond (or something like that).When I reboot, sometimes I see a terminal window with the same line scrolling very, very quickly-- something about waiting for USB.Additionally, the system is very slow to respond-- clicking a menu item can take a long time for it to appear, etc.
View 5 Replies
View Related
Nov 24, 2009
I have Debian installed a year ago, working perfectly until last week when network card connected to internet stopped to communicate. I did no change in configuration. It just stopped to work while I was reading an online web page. Network card connected to local network still works fine.
I thought it might be a NIC failure so I installed a new PCI NIC but no change, still no communication throught this NIC.
I verified/changed cable between NIC and the router, no luck. If I connect the same cable from router to a Windows PC, everything is OK. If I connect back to Debian machine, it does not work.
I tried connect this NIC with a different router with DHCP enabled, nothing, NIC will not communicate with DHCP server.
I tried to set static IP, no change.
Today I booted a Knoppix 6.2 and this NIC worked perfetly! It set up using DHCP, I could access the internet.
I booted machine as usual and the problem still persists of course.
This is information captured immediately after boot. The trouble NIC is eth0 after boot finishes.
All this was captured with eth0 connect to a router with DHCP enabled. There is no DHCP entry in syslog related to eth0. Reinstall is the very last option.
View 7 Replies
View Related
Dec 14, 2008
I have a laptop, and the wireless and cable worked fine for a while, but one day, for some odd reason, the wireless and network cable just stopped working. I'd connect to the web, and I would get output using "ifconfig" and the GUI wireless signal. When I hook up the wire, it detects it. However, no matter what I can't load any web pages. The wire does work in another house, and my windows partition utilizes these devices well. Any ideas?Additionally, I am able to log into my wireless router and change configurations, but that's about it :/.
View 2 Replies
View Related
Oct 21, 2009
I'm having some trouble with my networkmanager on openSuse 11.2. I want it to get the DNS Server from DHCP, but it notices that I had another process modify it (dhcpcd to be exact) and it just won't overwrite it, resulting in an out of date DNS server to be used.
View 2 Replies
View Related
