OpenSUSE Network :: NFS Automount Stopped Working - System Error: Connection Refused
Jul 6, 2010
I got connecting to our NAS over NFS working perfectly. Direct NAS Reading & Writing - How? But on Saturday I found out it had stopped working. For no apparent reason, not straight after an update either I don't think. When I manually try to mount --verbose:
mount 192.168.100.14:/IHL /mnt/IHL --verbose
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Tue Jul 6 14:48:32 2010
mount.nfs: text-based options: 'addr=192.168.100.14'
mount.nfs: Unable to connect to 192.168.100.14:111, errno 111 (Connection refused)
mount.nfs: mount to NFS server '192.168.100.14:/IHL' failed: System Error: Connection refused
Corresponding fstab line that used to work just fine. 192.168.100.14:/IHL /mnt/IHL nfs auto 0 0 For now, I can drop back to Samba but this is a PITA as I can't open OpenOffice documents and write to them directly on the NAS. The fact smb://192.168.100.14/IHL works proves networking wise we're cool too. There is no firewall between this PC and the NAS, the NAS is instructed to allow my PC's LAN IP full access. OpenSuse's software firewall has been told to allow NFS Client too. Why would this setup break out of nowhere? How can I debug this best? I see nothing relevant in /var/log/messages How can I get it to work again? A hopeful reboot didn't do its usual wonders...
View 3 Replies
ADVERTISEMENT
Mar 18, 2011
My problem is that the Mailserver in OpenSuse 11.1 (postfix, amavisd, spamassassin, clamAV en Razor) can not recieve e-mails, outgoing is ok. The problem started when I added 2 new users to de LDAP-server connected to Postfix.Some users can login, but most of them are getting the error: cant connect POP3 connection refused port 995.
View 9 Replies
View Related
Feb 22, 2011
I have a machine running with slackware64 13.1 and vnc servers is installed on it. It worked for months until yesterday, when I couldnt connect to the machine remotely.
I have 2 vnc "users" on this machine, root and "user". Each have their own desktop. Root has desktop :1 and user had desktop :2. Simple enough.
VNC servers is started via /etc/rc.d/rc.local with the command:
Code:
Code:
It worked flawlessly. I use the very same configuration on my home server, never had a glitch.
From the "distant" machine, I get this error when I try to connect:
Code:
Unable to connect to VNC server
What has changed so it no longer works? I assume its not a network problem since the machines are all located in my home network and there is no firewall or router in between them.
View 2 Replies
View Related
Sep 27, 2010
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
View 1 Replies
View Related
Aug 5, 2010
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
View 9 Replies
View Related
Nov 24, 2009
I have Debian installed a year ago, working perfectly until last week when network card connected to internet stopped to communicate. I did no change in configuration. It just stopped to work while I was reading an online web page. Network card connected to local network still works fine.
I thought it might be a NIC failure so I installed a new PCI NIC but no change, still no communication throught this NIC.
I verified/changed cable between NIC and the router, no luck. If I connect the same cable from router to a Windows PC, everything is OK. If I connect back to Debian machine, it does not work.
I tried connect this NIC with a different router with DHCP enabled, nothing, NIC will not communicate with DHCP server.
I tried to set static IP, no change.
Today I booted a Knoppix 6.2 and this NIC worked perfetly! It set up using DHCP, I could access the internet.
I booted machine as usual and the problem still persists of course.
This is information captured immediately after boot. The trouble NIC is eth0 after boot finishes.
All this was captured with eth0 connect to a router with DHCP enabled. There is no DHCP entry in syslog related to eth0. Reinstall is the very last option.
View 7 Replies
View Related
Mar 22, 2011
I have installed ssh in my system. i try connect some other system i am getting this error ssh root@192.168.7.140 ssh: connect to host 192.168.7.140 port 22: Connection refused
View 9 Replies
View Related
Apr 28, 2010
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies
View Related
Jun 20, 2010
My main PC has AN Athlon X2 4600+ on an Asus M2npv-vm. Has been working fine for ages running Ubuntu. Today it the system locked up and I had to do a reset. Since then it will not connect to the router or cable modem. I can connect another PC to the router, so that looks okay.
What can I do to test the network connection from Ubuntu? It's not even getting an IP.
I suppose it could be something has died in the hardware, but want to eliminate other possibilities first.
View 2 Replies
View Related
Oct 24, 2010
I'm running ubuntu 10.04 and suddenly when plugging my cameras or usb sticks, they don't automount anymore, but they did before. What changed is last days I tried to build and install nautilus-sendto manually from source, and it required dependencies including GTK+3.0 (unstable), I don't know what happened exactly or if my system is broken, because some of this packages built and installed fine and others failed. If someone wants to help with that to get my installation to its original state it would be awesome.I could mount my usb stick installing usbmount, it worked, but I didn't need this before.What I want now is to mount my cameras: here is the output for:
Code:
lsusb
gvfs-mount -l
[code]....
View 2 Replies
View Related
Apr 13, 2011
After 2 years of good service and after I've changed IP addresses in the router from 192.168.1.2 to 192.168.1.102 my autofs stopped mounting my NAS with NFS. That was the only change.
View 8 Replies
View Related
Aug 5, 2010
I've run into a situation where knetworkmanager tells me networking is disabled. If I switch to the ifup method in Yast then I can get online but when I switch back to user controlled knetworkmanager tells me that networking is disabled.I've actually had this happen twice.The first time I somehow managed to get it working again (I thought it was by right clicking on the icon in the system tray). This time I don't see the same option.Has anybody got any suggestions on how to get knetworkmanager working again.
View 9 Replies
View Related
Sep 18, 2010
over the last couple of weeks, firefox has asked to be upgraded a few times. shockwave flash has also asked to be upgraded. sometime last week after upgrading shockwave flash all video stopped. so i have no videos, video in webpages just shows a grey box, with a light grey arrow.i have been very busy so i have taken time here and there to check the internet for solutions. there appear to have been problems with macs' and a lot of the problems appear to be from august 2009 onwards,am not sure it is the same problem.i am running opensuse 11.1mozilla firefox 3.6.10shockwave flash 10.1 r82 is enabled
code:
uname -a
gives me:
[code]...
View 9 Replies
View Related
Sep 1, 2011
After a recent flash update it has stopped working in firefox 6 and konqueror. I am using 11.4 kde 4.6.5. Never had a problem with flash till now.
View 4 Replies
View Related
Jan 21, 2011
I am running Suse 11.0 and the system had stopped working. I booted from the disk and chose repair system. Now I can get to the Give root password for login and it accepts the password, but I get the line
(repair filesystem) #
View 3 Replies
View Related
Jul 20, 2010
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
[Code]...
View 4 Replies
View Related
Jul 22, 2011
I managed to kill KNetworkManager today and I'm not sure what I did. This is a netbook running openSUSE 11.4 with all updates applied and KDE 3.5 (from the openSUSE repository). Normally, I use knetworkmanager to connect to the Internet. Everything was working fine this morning and today I decided to apply whole disk encryption (using cryptsetup and luks) to it.
So, I backed up the files, encrypted the partitions, made some adjustments to /etc/fstab and /boot/grub/menu.lst, and copied the files back. Everything is working fine, except for knetworkmanager. When it goes to connect, it starts off with the "gray Earth" (to represent no connection) and then it switches to the "connecting" icon for a fraction of a second, and then it's back to the "gray Earth". Looking at the output of iwconfig, it hasn't connected to the router at all (the essid is blank).
The connection works fine using ifup. I tried using cnetworkmanager (the console version) and it spits out errors like this:
Code:
View 9 Replies
View Related
Dec 21, 2010
How could I determine, which element of network actually refused/close connection?
View 1 Replies
View Related
Mar 25, 2011
I've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies
View Related
May 24, 2011
ERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies
View Related
Feb 1, 2016
I have a 'little' problem with my vps, which was working before. Here is what I made:
- order an new IP and I was trying to modify /etc/network/interfaces in order to configure the ip
- even if I was logged as root, I wasn't able to modify 'interfaces' so I tried sudo and alsoto mount (different commands I found.)
- rebooted the VPS
Current situation: I can access ssh, but ispconfig3 and the websites are not working anymore.
View 1 Replies
View Related
Feb 21, 2011
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
View 6 Replies
View Related
Apr 21, 2010
I need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.
I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.
Here's what I tried:
Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)
Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.
I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.
In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.
Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.
View 1 Replies
View Related
Dec 29, 2010
I am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies
View Related
Aug 11, 2011
I now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
View 4 Replies
View Related
Aug 31, 2009
I Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
View 12 Replies
View Related
Jun 7, 2011
Since last Friday I get the following error when trying to upgrade packages with yum: [URL]: [Errno 4] IOError: <urlopen error (111, 'Connection refused')> Trying other mirror." The content of dag.repo:
[Code]..
View 2 Replies
View Related
Oct 25, 2010
Yesterday I turn off my computer without problems, and today my KDE 4.5 desktop just don't wanna load. It show this error:Floating point exception
Full error:
[Code]...
View 2 Replies
View Related
Aug 24, 2010
I am facing connection refused error 111 in TCP client server program, in android native code which in C , but if code is in JAVA it works fine, but i want to continue in C only, in manifest file i have given permission and ip, port is correct .What am doing wrong?? or is their any network setting?? am using UBUNTU 10.04and If both client server Linux pc it works fine. only if android emulator becomes client then am getting connection refused
View 1 Replies
View Related
May 4, 2010
I have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
View 3 Replies
View Related
