im located in Sudan which is under usa empargo, means some software is restricted in my country. My company which has 5000 emloyee os going to build their own webserver which will hold alot of apps which is compatible with linux i didn't trust M$ windows specially on web, so ive to use linux do u recommend any other release other than opensuse coz o can get free update and patches.
View 5 Replies
I am facing an issue connecting to WPA Enterprise network using a CA Root Cert. I have traced it to a bug report here [URL] when the fix is going to get push?
View 4 Replies View RelatedAre there any limitations to connecting to a WPA2 Enterprise network with PEAP authentication on linux? Here at my university, on any major linux distro, I can only connect to the secure wifi 50% of the time and when I do successfully connect, it get booted off in a few minutes. At home I can connect to my WEP internet network easily.
Using Windows I can connect to my home WEP network and my university's WPA2 Enterprise network easily. Note: I work at the computing department here at my university, so I know that there is no anti-Linux mentaility which resticts access to Linux-based distros.)
I have installed the Suse Enterprise server 11 SP1 on my laptop. I have the atheros AR8132 network card, and it seams the suse is detecting correctly, but i can't start the network up. He returns an erros saying that the eth0 is not supported by suse, or kernel, i must check to be sure.
View 1 Replies View RelatedIm new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View RelatedHow do i get Ubuntu to connect to my enterprise network? We have windows pcs configured to log onto custom network domain using managed desktop setup.
View 1 Replies View RelatedTo run applications compiled for RedHat 4 Enterprise (gcc3.4) on RedHat 5 Enterprise (gcc4.1), what should I do?
View 4 Replies View Relatedmy server and it had a load of 60 so i immediately took down apache and the load went back down to 0 in a few mins and every time i put it back on the cpu usage on both cores immediately goes to 100% and the load goes up to 20 in just 60 seconds until i take apache down again?
View 6 Replies View Relatedhow i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedThe message I get when I try and activate is "3c501 device eth0 does not seem to be present. delaying initialization."
Does anybody know what cards are compatible without downloading drivers and other such exercises?
I am trying to implement a NAS running Debian to replace the Windows 2003 file server.We implemented the system and we integrated it with the active directory. Is it possible to manage the access rights using windows tools and get the same amount of detail(not the right word) on access.As an example, we have the following folder structure:
Teams&Projects All users list, admins full
Team1 All users list, admins full, some users modify
Project1 All users no access, admins full, some modify, some list
I have read some articles on the internet that this is possible but I do not have enough information to implement this.
I want to extract a huge .tar.gz file but when I do extract it stalls the server. The server is write heavy and extracting seems to choke the disk. Is there a nice way to extract without stopping the world? I've tried the 'nice' and 'cpulimit' command but they don't seem to do the trick.
View 2 Replies View RelatedI am in need of the instructions of how to create a boot disk for my RED HAT Linux Enterprise Server. I have a floppy drive also it this helps.
View 2 Replies View RelatedI thought it would be great to be able to play DVD's so I installed an update that would enable this. The multimedia update was 1.3 Mb but the dependencies was about 650 Mb! Among others I had to update the whole Office pack. Is this a "feature" I have to go through on every installation or is multimedia special?
View 9 Replies View RelatedIn suse 11.2 when play a video file the media players eats up to 50% cpu and pulseaudio another 18-20% with compiz turn on, when i turn the compiz off media player goes down to 7-8 % and pulseaudio 1-2%. With audio files the picture is different - 2-3 % sometimes 7% pulseaudio and there is not matter if compiz is turned off or on.Is there some kind of configuration should be done ?
View 9 Replies View RelatedCan you Please tall me What are the configuration file for DNS
View 5 Replies View RelatedI'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedWhen I search addons with firefox, it takes 4 mins to connect to server, and after approving to ad it, it again takes that much time to connect to download. While downloading it's ok, but connecting to server takes time. This is for all addons. Is there any body having same issue?
View 7 Replies View RelatedCairo was working fine for me then randomly I see a huge black box behind it. I also cannot access my desktop effects along with it to activate compiz. I googled here and on the net trying different commands such as
:~> xgl-switch --enable-xgl
If 'xgl-switch' is not a typo you can use command-not-found to lookup the package that contains it, like this:
cnf xgl-switch
[code]....
To run applications compiled for RedHat 4 Enterprise (gcc3.4) on RedHat 5 Enterprise (gcc4.1), what should I do?
View 4 Replies View RelatedInstallation of CVS on Redhat linux
Installing CVS on Redhat Linux Redhat Enterprise 4.0
The following steps give simple steps to install CVS software on Redhat Enterprise Linux 4.0.
1) Download the tarball cvs-1.11.1p1.tar.gz
2) Run "gunzip cvs-1.11.1p1.tar". You will get file called cvs-1.11.1p1.tar.
3) Then extract this file using command
"tar -xvf cvs-1.11.1p1.tar".
4) Then go to directory cvs-1.11.1p1.
5) There you will find a file called INSTALL. Read it once carefully.
6) Now run the command "./configure."
7) Build it using the command "make".
8) Install binaries/documentation using command "make install".
9) Now open file called /etc/services and add the following lines.
Cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
10) Open file called /etc/xinetd.conf and add the following lines to that file.
service cvspserver
{
Port = 2401
socket_type = stream
protocol = tcp
wait = no
user = root
passenv =
server = /opt/bin/cvs
server_args = --allow-root=/home/cvs -f pserver
env = HOME=/home/cvs
log = /var/log/cvslog
}
11) Space on both sides of = in the above file is a must.
12) Restart xinetd services by running command " services xinted restart "
13) Check whether CVS is running on the port 2401 by using the following command "nmap IP |grep 2401". If the CVS server is running correctly it will give output as "2401/tcp open cvspserver ".
It doesn't output like "2401/tcp open cvspserver"
I'm trying to configure DNS on Oracle Enterprise Linux 5.4 - Kernel 2.6.18-128.el5. When I restart the named service, I'm not getting any errors. But service is showing Failed. What could be the reason?
View 3 Replies View RelatedI have a problem in connecting from windows xp OS to the REDHAT LINUX through vncviewer. The first connection works fine. However, if I want to add more than one connection by establishing the hostname:2 through vncviewer, it stops working. I have tried modifying the file /etc/sysconfig/vncservers to add more than one allowable connections. It still fails...
View 4 Replies View RelatedI am using red hat enterprise 5.7 OS and the problem is that vsftpd won't start. When issuing Service vsftpd start it comes up with failed. I am using the default RPM to install it, also using the default vsftpd.conf
View 8 Replies View RelatedI am trying to initilaize auditing on a Red Hat 5.2 enterprise server. Things like:
/sbin/chkconfig audit on
/etc/audit/audit.rules
/var/log/audit/audit.log
are what I am looking at, but I need to know where things go to start the audit service. A simple example with all of the pieces set to audit, then I can add rules to match requirements.
I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies View Relatedhow to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedI set up an apache webserver on a redhat enterprise server 6 last week. It works fine on the localhost. However, the webpage can't be accessed from the other computer. I didn't modify anything related to 'allow,deny' in httpd.conf. The only thing I've done is I added a rule in iptables to approve the access from a computer with a specific IP address. Since I am quite new to iptables, I don't know if there is anything wrong with my setting.
Even I stop iptables, the problem is still there. I don't know if my setting of iptables is correct. Or, there is anything else that I should do?
