OpenSUSE Network :: 11.3 - PPTPD VPN Server And Masquerading

Sep 13, 2010

Have a router running OpenSUSE 11.3. I have 3 interfaces
eth0 192.168.0.0/24 - local network
eth1 - The Internet if
eth2 - Citynet

I have configured routing and it works. I can browse the Internet from local net. However, I want to connect to my workstation (192.168.0.3) from Citynet interface. I've made masquerading rule in Yast it works just fine like a proxy do (on 192.168.0.2 local server). Now I need to run VPN server in my local net to connect from Citynet interface, and I have problems with it. I've configured pptpd on the router and it work for local network and I have a vpn server under Windows on 192.168.0.2

So my questions are:
1. What do I need to do in yast to allow vpn (pptp) ftom eth2 to 192.168.0.2?
2. What do I need to do in yast to allow vpn on router?
Some how I succeed to make redirection to 192.168.0.2 and it worked, but I've tried to change it to router and can't get it work again.

In all these cases client has the next message:
pptp[109]: LCP: timeout sending Config-Requests
pptp[109]: Connection terminated.
pptp[109]: Modem hangu

View 2 Replies


ADVERTISEMENT

Server :: Create A Virtual NIC For PPTPd?

Jan 4, 2011

I'm trying to setup PPTPd on my dedicated server and the IP ranges i put the in the config have to exist in one of the network interfaces otherwise the connection wont work,I currently only have eth0 with the direct internet IP which i can't use for this purpose,I need a new NIC with a LAN IP for this and I have no clue.

View 1 Replies View Related

Server :: How To Enable Masquerading In Sendmail

Feb 11, 2010

l have been trying to enable masquerading in sendmail. I've started from scratch. Here's what I did:
1.My Mail Server name is "ids.com" and local hostname is "server"
2. When I send the mail from my user to other user. The mail goes with user@server
All this allows me to send mail from all of my computers. Now, to get masquerading:

3. I have MASQUERADE_AS(`ids.com'), MASQUERADE_DOMAIN(`ids.com'), and FEATURE(`masquerade_entire_domain'). I also added "ids.com" to /etc/mail/local-host-names to be able to receive mail addressed to that domain.
This masquerades mail originating on the server, but still the mail from the other computers has a "From:" line of the form user@hostname.

View 2 Replies View Related

Server :: Ubuntu 10.10 - OpenVPN And Masquerading

Dec 12, 2010

I have set up OpenVPN Server on a VM (Ubuntu 10.10) running virtualbox bridged to the host. Everything is working fine excepts the fact that I cant seem to be able to assign internal IP (VPN Server) to client connecting. Let me explain: All my clients are connecting and accessing the internet without any issue. Where I have an issue is that all my clients come out the other way on the internet with my server ip address which kind of defeat the purpose. Is there a way (keeping in mind that I am running the server in a VM) to have all my clients accessing the internet with an IP provided by the VPN Server?

View 4 Replies View Related

Server :: Sendmail - How To Do Domain Masquerading

Apr 24, 2011

I have a Centos 5.5 Server, Servername is CentOS1. It has a Forum and a HelpDesk. The Help Desk software SENDS and acknowledgement to the user and emails to all the people on the support desk. Users can reply to emails only by accessing the helpdesk NOT by mail. Thus the server is configured to only SEND mail and not to receive any mail at all.

Mail Server is Sendmail.
Hosts file reads : -
# Do not remove the following line, or various programs that require network functionality will fail.
127.0.0.1CentOS1.tech.xxxxx.com CentOS1 localhost.localdomain localhost
::1localhost6.localdomain6 localhost6

There is NO MX Record because this server receives NO mail, it's send only. Unfortunately, the mail it sends has a From Header which is @CentOS1.tech.xxxxx.com. I want it to send from @xxxxx.com. I've read all the howtos on Masquerading and I've tried many, many things, but with the same results. It will NOT change the From. I had it working perfectly a long time ago with a SuSE server, but I can't for the life of me remember what I did. I know I also battled a bit.

The last few lines of sendmail.mc read : -
LOCAL_DOMAIN('localhost.localdomain')dnl
dnl #
dnl # The following example makes mail from this host and any additional
dnl # specified domains appear to be sent from mydomain.com
dnl #
dnl MASQUERADE_AS('xxxxx.com')dnl
dnl FEATURE(masquerade_envelope)dnl
dnl FEATURE(masquerade_entire_domain)dnl
dnl MASQUERADE_DOMAIN(localhost)dnl
dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
dnl MASQUERADE_DOMAIN(CentOS1.tech.xxxxx.com)dnl
dnl MASQUERADE_DOMAIN(CentOS1)dnl
dnl MASQUERADE_DOMAIN(tech.xxxxx.com)dnl
MAILER(smtp)dnl
MAILER(procmail)dnl
dnl MAILER(cyrusv2)dnl

I've tried each one of the MAQUERADE_DOMAIN in turn, none of them work and yes, I have remade it.

View 15 Replies View Related

CentOS 5 Server :: Masquerading Not Working?

Apr 30, 2009

I have some problem getting masquerade works, but no luck. I created a cronjob that do a backup which will notify me by email. I was able to received the email with from "root@domain.mydomain.com" I want to change this to root@mydomain.com, I tried do the masquerade and it does not work.

View 6 Replies View Related

Server :: Stuck With Masquerading With ProFTPD Version 1.3.3e?

Jul 19, 2011

I am literally quite stuck with proftp the version being: ProFTPD Version 1.3.3e# I have the following config:

[Code]...

I mean would I need to logically seperate out a series of passive ports and then open them using my custom routers NAT, so each passive port goes to its own virtual host as such? Just a bit confused about what the next steps would entail I mean I don't have any firewall on my Linux box, don't see the point since I use pfSense and an IPS/IDS and it's never been hacked since!

View 2 Replies View Related

Server :: ProFTP Masquerading Setup Uses IPChains Convert To IPTables

Jan 25, 2011

How to Nat. I wanted to be able to resolve something like
ftp.myfirstdomain.com to 192.168.0.2
Then ftp.mysecond.com to 192.168.0.3

Just as a random example, I know these cannot be done using name based virtual hosts like in Apache. But I got this working internally using my LAN connection and the 2 IP addresses above, with Bind DNS pointing the dns's to those 2 ip addresses respectively. This worked, yet when I tried connecting from my work place to transfer some files, it kept going to the default user's home directory. Just wanted to get this project finished, 2 domains and one public facing IP address.

View 3 Replies View Related

Networking :: Connect To A Vpn Server - The Required Daemons - Pppd And Pptpd - Aren't Availabale

Apr 12, 2010

I want to connect to a vpn server and I'm using debian 5.

I installed Kvpnc package but when I try to make a new profile I choose "Microsoft pptp" as vpn type and I receive the following message: the required daemons (pppd and pptpd) aren't availabale

Is there anyway to download required daemons in another computer and use them in my computer (I'm worried about dependencies)?

View 3 Replies View Related

Server :: Con't Connect To PPTPD Server

Jul 22, 2011

I am trying to set up a VPN server, and I had it working, but needed to reinstall the system for other reasons. Now, with the same setup, it is no longer working. When I attempt to connect to it from my Mac, it tells me that a connection could not be established, and the connection drops. When I connect to it from my iPhone, it works, but I can't access the internet. I have included the 2 parts of the log file for the iPhone and laptop connection and both config files.

View 1 Replies View Related

OpenSUSE Network :: Network Login Starter - Set Up A Server - Centralized Username And Password

Jan 21, 2010

I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.

Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.

What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication

Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").

So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.

I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.

View 2 Replies View Related

OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?

Feb 26, 2010

I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.

View 7 Replies View Related

OpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?

May 12, 2011

I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?

View 3 Replies View Related

OpenSUSE Network :: Adding Network Drive From Server?

Aug 5, 2010

I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.

View 1 Replies View Related

OpenSUSE Network :: Create A Network Policy Server?

Jun 1, 2011

how to create network policy and system policy in opensuse11.4 and domain policies also???

View 1 Replies View Related

Ubuntu Networking :: Can't Get Pptpd To Work

Jun 4, 2010

I'm having trouble setting pptpd up for ubuntu10.04-minimal on my VPS.

I've used this guide: [URL] my Mac won't connect. pptpd is running.

There's no logs - not even a /var/log/syslog - why is that?

Here's my configs
pptpd.conf - http://pastebin.com/C4vpJBq9
pptpd-options - http://pastebin.com/aTUmApaLedit

View 1 Replies View Related

Networking :: PPTPD No Gateway / Ping OK

Mar 8, 2010

My problem is simple, iam runing ubuntu 8.04 (ebox 1.4) , i have installed and configured PPTPD server, i can connect and ping users perfectly. BUT i dont getting any gateway address, in my case i have to get IP address 172.16.0.1 (PPTP server address).I tried to change localIP in pptpd.conf to 0.0.0.0 ,or my remote(ISP) address but nothing.Can someone explain to me how can i manually assign gateway IP address to PPTPD Server ???

View 1 Replies View Related

OpenSUSE Network :: Server Description On The Network?

Jun 8, 2010

When I installed OpenSUSE 11.1 on my server, at some point, I gave the server a description. Whenever I connect to any of the shares on the server, this description appears. For example, on one Windows workstation, there is a share which appears in Windows Explorer as "Midwest on 'Cincinnati Corporate ISS Server (ISS0042)' (T:)".

For the life of me, I cannot find where this description, "Cincinnati Corporate ISS Server", is stored. I've search through /etc, and poked around ad nauseum in YAST, but I am missing it. Where is this description stored? What is the YAST function to change it?

View 7 Replies View Related

Ubuntu Networking :: PPTPD - VPN Works Only Partly?

Jul 14, 2011

I configured a PPTP server on Ubuntu 10.10. It works fine! Sort of. My MacBook running OS X 10.6 connects fine. But my iPhone can't seem to connect! The iPhone settings seem to be correct.

Here is the output of the Ubuntu syslog when I try to connect with the iPhone:

Code:
Jul 14 20:17:04 Ubuntu-Backup-Server pptpd[2601]: CTRL: Client 192.168.1.1 control connection started
Jul 14 20:17:04 Ubuntu-Backup-Server pptpd[2601]: CTRL: Starting call (launching pppd, opening GRE)
Jul 14 20:17:04 Ubuntu-Backup-Server pppd[2602]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded.
Jul 14 20:17:04 Ubuntu-Backup-Server pppd[2602]: pppd 2.4.5 started by root, uid 0

[Code]...

View 9 Replies View Related

Networking :: Pptpd (poptop) Remoteip Range?

Jan 25, 2011

Currently I have the following configuration on pptpd.conf which allows 250 connections :localip 192.168.10.1remoteip 192.168.10.2-254connections 250I would like to increase the connections to 500 , so I need more remoteip , what is the correct format for defining more remoteip

View 2 Replies View Related

Ubuntu Servers :: PPTPD Auto Disconnect Settings?

Mar 23, 2010

PPTPD Auto Disconnect Settings?

View 9 Replies View Related

Networking :: Change Default Port Of Pptpd To 1813?

Jan 29, 2010

I used pptpd in cent os 5.4I want to change the default port 1723 of pptpd to 1813I chnage the pptpd port in service file to 1813 but ppp dont worknote : in ms vpn client i change the port to 1813

View 8 Replies View Related

Networking :: SuSE 11.3/64 Pptpd Vpn Fails To Send Gre Packages

Oct 28, 2010

I just setup a SuSE 11.3/64 server and I am trying to setup pptpd for a vpn. I noticed thatg the ppp0 (or any pppx) interface is non-exoisting and I think that that is the problem why my gre packages are not being sent by pptpd (as I have checked all other options). I have tcp port 1723, and protocol port 47 (gre) open on the firewall (SuSEfirewall2). I have traced the responses using tcpdump and only when the server sends gre to the remote client, the client never receives it (the 1723 connection is established). I checked the old server (SuSE 10.2) that worked the vpn fine, and the only thing missing on 11.3 is ppp0. All other hardware (routers, etc.) are the same. I suspect that pptpd tries to use ppp0 and the interface is non-existing. I can remotely ssh to the server, dns works, samba works, everything else works. Is it something I am missing? How do I create if ppp0 and link it to eth3, the internet gateway? Do I need ppp0?

View 2 Replies View Related

Software :: PPTPD RPM Not Installing Properly - Slow Repository ?

Apr 11, 2011

I've recently struggled across this problem:

Code:

While executing this command:

I've tried to install glibc which didn't change anything.

My other problem is that I'm downloading at 35kbps from connexeon.net (Belgian repo) but that my connection is the following: [url

View 1 Replies View Related

Networking :: Ip Masquerading With Mac Address Filtering?

Apr 30, 2010

I pay for wifi usage. The access points are using mac address filtering. I know this because I can spoof the mac of another computer of mine and get it online. I'd like to get both the computer's online. I've been trying to do ip masquerading. It hasn't been working so far. I am not sure if the computer connected to mine through a cross over cable is revealing its mac address to the access points when communicating. If so, how does one get around this? ping shows connectivity between the two computers.

View 4 Replies View Related

OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?

Mar 27, 2010

I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command

Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this

[code]....

View 9 Replies View Related

OpenSUSE Network :: Lamp Server To Send Automated Emails Using Cable Providers SMTP Server?

Jun 19, 2010

Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server

View 2 Replies View Related

General :: Sendmail Masquerading Email From Address?

Jul 18, 2010

I have my system set up with sendmail (going through my ISP SMTP server) but when I sent an email using sendmail it was defaulting the from address to user.host.domain or something similar. So I read up about masquerading [URL] and managed to get it to USERNAME@myisp.com however I want to change USERNAME to a different value because my ISP username is different from my machine username. My aim is just to get the from address to be [URL]. This machine is only used by me so I don't need it to be different for different users if that makes things any easier...?

View 4 Replies View Related

OpenSUSE Network :: Debian Server To Opensuse Desktop Samba?

Jan 20, 2010

I setup a debian home server some time ago and have successfully setup samba so my windows machines can access them and upload/download data off it.I have setup opensuse on this desktop and after allowing smb through the firewall I now seem to have read only access to the smb shares.I am using the same username and password as I do on my windows machine, so in theory smb server should see my username and password and allow me read/write, like it does in win7. Is this correct?

Having just thought about it I think samba is just a tool to get shares working between linux/windows and macos.Is samba even the best tool for linux - linux sharing? how do I get read/write access to my shares in opensuse?or do I use another program to see my shares?I'm a bit new to this linux- linux sharing so I apologies.

View 1 Replies View Related

Fedora Networking :: Using IP Masquerading - Internet Connection Sharing

Jan 13, 2010

I have recently installed Fedora 12 and want to share my internet connection with other pc's at my home including windows pc. My linux machine is connected to internet via DSL connection.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved