I have a creative zen m player that only seems to work with a program called gnomad2 Gnomad2 - Getting your Jukebox/Zen running under Linux . Is it possible to use this under suse?
View 1 RepliesAfter upgrading to Lucid Lynx I can't get Gnomad2 to work with my Creative Zen X-Fi. I used to get it to work by running Gnomad2 as a super user, but now the program quits itself when trying to get the songs from the device claiming a segmentation fault.
Code:
Device 0 (VID=041e and PID=4162) is a Creative ZEN X-Fi.
Queried Creative ZEN X-Fi
Segmentation fault
I'm trying to install Gnomad and have got this far. I type ./configure and everything looks like its kinda working then it says
"No package 'glib-2.0' found
No package 'gthread-2.0' found
No package 'libnjb' found
No package 'gtk+-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GN_CFLAGS and GN_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details."
Normally I find everything I need either in the documentation or forum, but it's been months, and this time I'm stumped. I'm posting the results of my latest tests, so I'm really sorry about the length of this post.
I can't play DVDs unless they've been burned by myself or a friend. I had no problems until around the beginning of April. I was running 11.2 on both my laptop and desktop. I think an update changed something. This was before 11.2 was officially retired a week or so later. I wanted to upgrade to 11.4 anyway, so I began with my laptop. During installation I wiped everything from my hard disk by creating new partitions and formatting them. After installation I installed the multimedia packages using one-click (opensuse-guide.org, not opensuse-community.org, although I did read what they said). I know one-click is not ideal, but I was curious. The result was that I still couldn't play DVDs.
I did a fresh installation, just to be on the safe side. This time I installed the packages according to Multi-media and Restricted Format Installation Guide by caf4926. But I still couldn't play DVDs, so I went through the thread Check your multimedia problem in ten steps. Then I ran mmcheck (v2.35). I tried a few times, experimented, and in the end did another fresh install.
In the meantime, on my desktop, which still has 11.2 on it, I found the file which had been changed and changed it back, so I could play DVDs on it again. It was in /etc/udev/rules.d/, 70-persistent-cd.rules. This does not appear to be the problem in 11.4 on my laptop.
I have again installed the packages according to the multimedia installation guide, and done the ten-step check and run mmcheck and these are the results as they stand:
I couldn't find a package called mplayerplug-in. I used zypper to look for it.
I tried installing the totem packages in a previous installation, but they didn't make a difference, so I left them out this time.
I deinstalled my jdk, but it doesn't seem to have made a difference, except that I get an error notification everytime I want to use LibreOffice. And I need it, so I'm putting it back soon.
So, these are my packages:
And this is what happens when I try to play a DVD using Kaffeine (since I don't an error message except from Kaffeine, and I've forgotten where my logs are):
And then comes Read error from: Error reading from DVD over the GUI.
And nothing else happens... I get no feedback from smplayer whatsoever. It opens, trys to read the DVD, and sits there. Even on the console.
Has anyone ever successfully installed sabnzbd on opensuse? It works great on Ubuntu and is easy to install, but on opensuse, I can't figure it out.
View 4 Replies View RelatedSomehow I cannot get sound on my newly installed opensuse 11.3, KDE 64 bit..I tried the sound panel and it looks allright. I also followed the multimedia guide an installed packman repositiry and vlc, - i might have done it wrong?
View 9 Replies View Relatedhow to get Amarok 1.X installed on 11.2? I updated to 11.2; and as far as I can tell it's only got A2. I am REALLY DISPLEASED with A2 and want to go back to 1.4. I couldn't 1.4 any where for downloads; as far as repos go.
View 9 Replies View RelatedI have install XVID MPEG-4 and I can't read a film with totem. I get the sound but not the image! What can I do?
View 1 Replies View RelatedI recently installed openSUSE 11.2 on a computer in place of Ubuntu 9.10. In Ubuntu, Totem will play a midi file. How do I make that happen in openSUSE? I don't know which package I need to install to make that happen.
View 7 Replies View RelatedI got Miro and it installed but when I launch it it just quits. 11.2 64bit
View 5 Replies View RelatedJust got done installing openSUSE 11.3 with the fantastic support the forum brings, but now I notice there is no sound coming from Firefox (v3.6.8) with Flash v10.1. Nor do I receive the new message sound for the Facebook chat. I do have sound at start up (the start up chimes) and I do have working sound in Amarok (with glorious mp3 support, YaST2). Is there a plug in that is needed, or is there an incorrect setting?
View 2 Replies View RelatedI'm trying to install HandBrake on my computer and it always comes back with the following: Error Package /home/Josh/Downloads/HandBrake-0.9.4-Fedora_GUI_x86_64.rpm could not be installed
Details:
Subprocess failed. Error: RPM failed: error: Failed dependencies:
libstdc++.so.6(GLIBCXX_3.4.111)(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
libwebkit-1.0.so.2()(64-bit) is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(FileDigests) <= 4.6.0-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
rpmlib(PayloadlsXz) <= 5.2-1 is needed by HandBrake-gui-0.9.4-1.fc12.x86_64
I'm using openSUSE 11.1 64-bit and as far as I can tell I've installed libstdc and libwebkit. I can't find (FileDigests) and (PayloadlsXz). I've searched around and couldn't find much on this.Don't the above errors mean that I do not have those packages installed, or am I just reading this wrong?
I downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
View 6 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View Relatedhow to get the dependencies installed.
mark@mark-desktop:~$ sudo apt-get install cinelerra
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
i have been looking and trying different things for about 2 days now and i cant get anything to work.
here is what i have
Dell studio xps 435mt but i am only running 32 bit ubuntu right now
tina@tina-desktop:~$ sudo cat /proc/asound/card0/codec#* | grep Codec
Codec: ATI R6xx HDMI
tina@tina-desktop:~$ sudo lshw -class sound
*-multimedia
description: Audio device
product: HD48x0 audio
vendor: ATI Technologies Inc
[Code].....
I have debian 8.2 installed with kde desktop. When I try to shutdown the system sometimes, nothing happens. the desktop stays put. i can continue working though..the system does not freeze. The only option is to log into the terminal as su and shutdown with the shutdown command.
View 1 Replies View RelatedI have no idea what that means the web cam i ordered says "Make sure you have Linux UVC driver installed." How do I check and if I don't have one how do i get one? When installing Squeeze i have to do the text install cause my PC can handle the Graphical instillation for some reason so i installed GNOME with this apt-get install gnome So is a UVC driver included in that instillation?
View 8 Replies View RelatedI'm running stable debian, installed mocp but the sound is too low even at 100% volume. Is there a way to amplify mocp sound at e.g. 140%? I use mocp with equalizer
[Code]....
but in equalizer config there's nothing about amplifaction..
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
I installed it yesterday and was disappointed that no sound played
View 3 Replies View Relatednstalled Fluendo but can't play DVD
View 2 Replies View RelatedI installed avidemux so I can split a video file. However avidemux doesn't show up on the menu. It should appear in Applications->Sound and Video but it's not showing up under any of the menu items. When I go to Ubuntu Software Centre it shows that avidemux is installed. How do I find it so I can run it? I'm running Karmic.
View 2 Replies View RelatedI'm having some issue running a wine application, this seems to not start 'cause of some missing libraries.
So I tried to locate those and the only one I found is this:
# locate libxcb.so.1
/usr/lib/i386-linux-gnu/libxcb.so.1
/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
/usr/lib/x86_64-linux-gnu/libxcb.so.1
/usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0
These others don't show any result, but I checked and all the corresponding deb pkgs are installed (both amd64 and i386):
libx11.so.6
libxext.so.6
libgl.so.1
libc.so.6
What do you think I can do to resolve? I aleady tried a reinstall. Not tried to purge 'cause apt asks to remove half of the system.
I´ve read lots of out-of-date guides on how to install Skype on 64-bit GNU/Linux, but has anyone managed to do it on Squeeze.
View 14 Replies View RelatedI did a base install, ran apt-get install xterm twm iceweasel xinit the install went fine, but when i run xinit, it says i need a link in /usr/bin called X to Xauth. I could not locate Xauth.
View 3 Replies View RelatedI installed debian and want to install compiz (properly).Read this thread Compiz and followed the instruction to install the packages. It mentions xorg.conf which does not exist where it tells me to look.I can type "compiz --replace" and it does do something but all the window borders disappear. I tried compiz setting manager - still same problem.And no visual effects (presumably due to missing xorg.conf)
View 9 Replies View RelatedAfter a Christmas morning scramble trying to get Sims3 working for the kids, I ended up pulling an Nvidia 6200 AGP card out of a perfectly good Ubuntu box and threw it into the kids' PC. I replaced it in the Ubuntu system with an old Nvidia Geforce 2 Ti AGP. From the start I was unable to get any resolution higher than 800x600 with the GF2. Tried removing xserver-org, reinstalling, reconfiguring, etc. Installed the Nvidia legacy drivers, all no luck. Tried booting with a 9.10 live CD and it works perfectly - various resolutions, refreshes, etc. So, the card is capable. I've checked, rechecked, restored, modified xorg.conf to no success.
I'm at a text login now, startx returns (among other info) the following:
dlopen: /usr/lib/xorg/modules/drivers//nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
(EE) Failed to load /usr/lib/xorg/modules/drivers//nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available
Fatal server error:
no screens found
Now, I've checked, and nvidia_drv.so is where it's supposed to be (in the drivers directory). What concerns me is the "//" in the directory path string in the (EE) above preceding the driver name - shouldn't this be a "/"? Is the command not able to find the driver correctly? Regardless, at this point my goal is simply to get the system to use whatever process the live cd is using which results in a working GUI. Don't need fancy 3d, etc, just want a working system.
When I run openshot it spits out this:
Code:
Added /usr/share/openshot to system path
OpenShot (version 1.0.0)
*** ERROR: MLT Python bindings failed to import ***
*** ERROR: MLT Python bindings failed to import ***
Error: OpenShot has not been installed in the Python path.
(Both the site-packages and /usr/share/openshot folders were checked)
Use the following command to install OpenShot:
$ sudo python setup.py install
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 525, in __bootstrap_inner self.run()
File "/usr/share/openshot/classes/thumbnail.py", line 174, in run mlt.Factory().init()
NameError: global name 'mlt' is not defined