OpenSUSE Multimedia :: Different Priviliges In Run Levels 3 And 5 ?
Jan 28, 2011
I noticed that thare are different default priviliges for the user depending if I boot in run level 3 or 5. Normally I use init 5 and login in graphical mode straight to Gnome desktop. Then all my USB devices (memory and external USB sound card) are accessible and work. If I log in throught termina (init 3) then USB has to be mounted and the sound card is not recognized.
Is there any general rule for such behaviour? If I plan to use level 3 shall reconfigure the system go get immidiate acces to usb sound card?
View 1 Replies
ADVERTISEMENT
Apr 24, 2011
I have a rather extensive mp3 collection.
The problem is some of the songs are louder than others, in other words set the volume and next thing a song comes along that scrambles your brains it's so loud, Or you get one you can't hardly hear.
I've used a couple of GUI's in the past, but all of them seem to do one song at a time. Not really an option with over 10,000 songs.
What would be nice is if I could pick one song as a base line and using terminal run a batch of say 500 songs through it.
Running 10.10 2 gig of memory
Use Rhythm box to handle music currently.
Been using since Dapper Drake, I'm not afraid of the command line, but I am far from an expert user, in other words I know just enough to be a danger to myself and others
I've never written a script file to automate anything but this may well be a time to learn one.
View 5 Replies
View Related
Mar 23, 2010
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
View 3 Replies
View Related
Sep 29, 2010
I just recently installed ubuntu so I'm quite lost on some stuff. This little annoyance comes from the volume levels in Ubuntu 10.04. I have partitioned my computer to have dual boot into windows and ubuntu, so I know the problems are not related to the hardware itself as everything works just fine in windows. I am using a Dell Inspiron 9400, for reference.
The multimedia keys on the computer respond correctly but on the lower three volume settings sound completely drops out as if I had muted the computer. I went into the Alsa mixer to see if I could configure these sound levels and sure enough the master volume was down to zero, PCM and LFE are also low . I changed the settings of the lower levels but when I press on the volume up or down media keys to switch level the settings get reset. I tried just changing one level, exiting and saving through alsactl but it didn't stick. Even after reboot the settings are back to the zero volume on the first levels.
View 1 Replies
View Related
Jul 7, 2010
I am currently troubled with a very annoying problem - the volume level of the PC is jumping higher and lower at random intervals. It makes listening to music very difficult, as at times the music can go from just right to overly loud, just to fall right down so that it is hard to hear. I've only noticed this problem in the past few weeks, and I can definitely say it wasn't an issue in 9.10. This is a fresh install btw, not an upgrade.
Some details:
Using motherboard sound, Realtek HD Audio, iirc. Below is the output of lshw, with the irrelevant parts cut out.code...
View 7 Replies
View Related
Jul 28, 2011
I have a desktop which has both windows and ubuntu. I want to add some users in ubuntu, say Me (first user),B and C. i) Certain folders should remain inaccessible from windows partition.ii)Me should be able access both B and C home folder, but not otherwise.iii) user B can access user C, but user C cannot access user B.
View 5 Replies
View Related
Dec 13, 2010
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies
View Related
Jun 17, 2011
I noticed that sensors reports some strange numbers regarding my PSU:
[Code]...
I have not change any sensors configuration for 3 years now (from the day that I makde my PC), and I have not seen those numbers before. So, why are the maximum levels so low? Why is the VBat and V5SB readings so messed up? Can I do something to correct it? If not, is it a problem of the PSU?
View 9 Replies
View Related
Nov 15, 2009
I am an experienced redHat/Fedora sysadmin but I'm completely new to ubuntu/debian world and the-way-the-things-works. I am trying to understand a few things. One of them is security related. Is AppArmor an extra security layer that protects individual services based in what is the normal and expected behavior, right? Why it is disabled in all run levels expect level 6 (reboot?)? Should I enable it on all run-levels? Should I select which service to protect or the defaults are fine ?
Is netfilter, the basic packet filter on Ubuntu 9.10? I founded iptables and I installed firestarter, but looks like firestarter is protecting nothing from outside, based on this iptables -L output:
Code:
Chain INPUT (policy DROP)
target port opt source destination
ACCEPT all anywhere anywhere
This is right? The default policy is DROP but there is a rule that allows anything from anywhere? This make any sense ? And finally, what is ufw and why it is disabled in all runlevels? Is ufw a replacement for iptables, or firestarter or it is a completely new animal? Should I use ufw instead firestarter? I am impressed about how different is Ubuntu/debian from other RH based distros. I just realize how much I have to learn about this new stuff.
View 2 Replies
View Related
Sep 30, 2010
I have freshly installed an Ubuntu 10.04.1 by internet.
All is running well, but my nice values are all set to 0. Is there a script that handles these at boot time? How can I reset them to "appropriate" or "normal" levels (e.g. not all at 0)? I know in other installs, my nice levels vary depending on the process and the user.
Attached is a screen shot of my gnome-system-monitor, and aside from init, which I had set to -15, all others are at 0.
Computer specifications:
Linux AMD-LNX000 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 GNU/Linux
AMD Athlon 64 Processor 3000+
[Code]....
View 6 Replies
View Related
Jul 10, 2009
I'm new to Fedora and must say I love it. Previous Debian and Arch user but feel at home now. I'm after a difinitive answer for this issue as I can't seem to find what I need anywhere. I'm running Fedora 11 kde 4.2.4 with an Epson Photo Stylus RX425 printer / scanner combo connected via usb. Is there any way to moniter the ink levels in this printer? I'm tearing my hair out.
View 9 Replies
View Related
Mar 1, 2010
I am running F12 and I use Amarok to manage/play my music library.
I keep having a problem where the mixer 'Surround' in my alsa volume gets maxed whenever I switch tracks in Amarok. I want to stop this from happening because it causes my speakers to buzz just loudly enough to drive me crazy.
I have an SB Live! 5.1 (emu10k1) card.
View 8 Replies
View Related
Mar 28, 2010
I don't really now where this goes but figured i start in the general forum, mods please move as needed.I got my f12 install up and running great. I recently burned an audio cd. when i used it in my car i noticed i had to turn the volume up a lot more then on my other burned cds. previously i used my mac to burn cds. the mp3 files are the same, they are located on a external hd that both computers access. the difference is significant. any ideas on why this is?
View 4 Replies
View Related
Feb 9, 2010
For some reason, it cannot change my zoom levels like before in numerical order with the zoomy extension.I have tried refreshing the page and restarting the computer, this is with Jaunty.
View 2 Replies
View Related
Jun 6, 2010
I have a epson sx100 and i can't check my ink levels with esputil. This is what i get when i type the command.
pianoterra@pianoterra-desktop:~$ sudo escputil -r /dev/usblp0 -s
Escputil version 5.2.0-rc1, Copyright (C) 2000-2006 Robert Krawitz
Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l'
[Code].....
I also have another problem which is i can't change the permissions of /dev/usblp0 because i stupidly changed them in to read write execute to all using chmod 777 without thinking that the device file isn't executable. Why can't i change the permissions back as they were?
View 4 Replies
View Related
Feb 24, 2011
I was wondering if there is any kind of tool that i could use to check the ink levels in the printer. It is blinking that one of the carts is out but there is 4 in this printer. Its a pain in the **** having to hook it up and install it to a windows computer just so i can see what cart i need to replace. I went to System>Administration>Printing> Right clicked on the printer then went to Properties>Ink/toner levels> In the box it says "Marker levels are not reported for this printer" Hmm so basically i shouldn't use this printer?
View 2 Replies
View Related
Oct 23, 2009
hHow would I add my SSH server to run levels 3,4,5? I have been trying to search google for this answer to my problem for hours and cannot have any luck.
View 2 Replies
View Related
Jan 5, 2010
I am using UNR 9.04 with Alsa 1.0.22.1 For some reason everytime I reboot my volume levels reset to headphone & speaker muted and headphone/speaker/PCM levels all set to 0%.
Does anyone know if there something I can that will allow my levels to be the same after I reboot? or if there is a script out there that will set my levels on startup?
If there isn't a script what would I do to create my own? also what would I do to have it auto run at startup?
View 3 Replies
View Related
May 15, 2010
Has anyone found a useful solution to monitor ink levels in a Canon MP 560 printer?
I was able to get the printer to work over a wireless network in Lucid but the printer properties do not show any ink levels.
View 2 Replies
View Related
Apr 7, 2011
I've been using Ubuntu 10.10 for almost a year now and I'm really happy with it. I completely uninstall windows from my computer I'm able to do everything a used to do on Windows now on Linux, and even more... except for one thing... I cannot see the ink levels of my printer. It's a multifunction Epson Stylus TX110. I installed escputil and used the command "sudo escputil -i -u -r /dev/usblp0", the printer then starts making noise and no matter how long I wait, it never presents any info or displays the message: "device is busy" with no info about the ink levels.
View 6 Replies
View Related
Jan 21, 2010
I have CentoS 5.3 and switching init levels does not work.when I login console mode,doesnot work ctrl+F7 key...and on the contrary.when Im in graphical mode, does not work ctrl+F1...ctrl+F6 keys.
View 4 Replies
View Related
Sep 30, 2010
This little fragment does the opposite of what I want and I am trying to figure out how to reverse it. I want to strip off the directory and echo just the filenames. I cannot predict how many levels deep the directory tree is.
View 6 Replies
View Related
Jun 17, 2010
From runlevel 3 as root, when I attempt to change to runlevel 5 by typing the command "init 5", I get the following error:Id "x" respawning too fast:disabled for 5 minutes
View 4 Replies
View Related
Feb 12, 2011
since I am on a Dell inspiron 1545 laptop, being able to display my battery charge is critical. After some extensive googling, I found I need a command 'acpi', which does not exist on my computer. I cannot seem to find it in the packages database; the closest thing being 'acpi-support' apt-get install also can't find it.
I tried cat /proc/acpi/battery/BAT0/state, but that only shows me if the battery is discharging or charging and doesn't give me an actual percentage.
View 1 Replies
View Related
May 1, 2010
In Firefox 3.6 on Ubuntu 9.10, certain sites seem to use bitmap fonts for any fixed-width fonts, but only at specific zoom levels. This site and other Stack Exchange sites are among the affected sites, and of course the default zoom level is affected. At unaffected zoom levels, I get the expected smooth curvy fonts. How can I make Firefox use the nice curvy smooth fonts at all zoom levels?
Edit: Adding example code for my own reference.
View 1 Replies
View Related
May 30, 2011
Everytime I start the browser after log in Kubuntu the levels go back to the first one. I'm using Chrome 11.0.696.71
View 2 Replies
View Related
Dec 2, 2010
HP's apparently all but useless Linux site suggests that their hplip drivers give you that capability. However, it also seems to expect that I will be running a GUI to use their tools.
My CP-1215 is attached to my server which doesn't have a GUI installed.
Previously I'd been using the open source CUPS driver, which seemed to work pretty well. However, I recently ran low on one colour of toner which messed up the printing. The toner-out lights on the printer never cam one, so replacing the toner cartridge was not the first thing I tried to fix it.
I've just installed the hplip / hp-plugin driver which also seems to be working. However, the CUPS web interface doesn't allow me to retrieve the toner status.
Has anyone had any luck retrieving the toner levels from an HP colour laserjet printer?
View 3 Replies
View Related
Nov 17, 2009
Our server is a CybertronPC I2XV9080 Imperium Tower. It is equipped with a supermicro X7DVL-I Motherboard and Quad 750 GB SATA2 RAID edition hard drives in a raid 5 array. We tried to install Centos on the Raid5 array with Device-Mapper as the LVM. In the BIOS SATA Raid was enabled and the ICH RAID code base option was set to [Intel].
Intel Matrix Storage Manager Option ROM V5.6.4.1002 ESB2
RAID
ID Name Level Strip Size Status Bootable
0 Raid5 Raid 5 64KB 80GB Normal Yes
1 Raid_5 Raid 5 64kB 2000GB Normal Yes[code].....
Can I have multiple level raids across the same array or would that lead to problems as above? Is the root cause of my problem the fact that intel raid5 is not supported for Linux as based on the following link http:[url]....
View 3 Replies
View Related
Apr 15, 2011
I ran openSUSE way back since version 7.3, before that I was on Redhat 6 and briefly at 5 before that. I know my way around Linux pretty well but two problems with Fedora are bothering me right now. I'll begin a separate thread for each one to keep things clear.The first problem is with sound. I remember having problems with the Intel ICH7 chipset and pulseaudio on openSUSE, but the problem I have with Fedora is different. Sound works, but each time after rebooting, I have to open alsamixer to turn the master volume up from zero. Being an openSUSE user, I am comfortable with KDE, so I am running KDE 4.6.1 as my DE.Two sound devices have been detected, one is the Intel soundcard, which is recognized as snd_hda_intel. The primary sound device, according to alsa, is my Logitech UVC cam.
View 2 Replies
View Related
Jun 27, 2011
Ok now since f15 does not use inittab file for default runlevel anymore how do you change it.
I have tried ln -s /lib/systemd/system/multi user.target /etc/systemd/system/default.target
And get the following error ln: failed to create symbolic link `/etc/systemd/system/default.target': File exists
I have even tried changing the /etc/systemd/system/default.target to my multi-user.target file to no aval.
View 4 Replies
View Related
