For some reason, it cannot change my zoom levels like before in numerical order with the zoomy extension.I have tried refreshing the page and restarting the computer, this is with Jaunty.
View 2 RepliesIn Firefox 3.6 on Ubuntu 9.10, certain sites seem to use bitmap fonts for any fixed-width fonts, but only at specific zoom levels. This site and other Stack Exchange sites are among the affected sites, and of course the default zoom level is affected. At unaffected zoom levels, I get the expected smooth curvy fonts. How can I make Firefox use the nice curvy smooth fonts at all zoom levels?
Edit: Adding example code for my own reference.
i have this weird problem with my pavucontrol. for some reason my input levels go up and down by themselves when i'm talking on skype...mostly up...and it's annoying because i'll be talking normally, but to the people i talk to on skype it sounds like i'm yelling, and i have to have pavucontrol open always to constantly keep the levels under control..i've made a short desktop recording showing what i mean.i didn't include sound, but as you can see, i'm not turning the levels up manually..i just talk and they go up by themselves
View 3 Replies View RelatedFrom runlevel 3 as root, when I attempt to change to runlevel 5 by typing the command "init 5", I get the following error:Id "x" respawning too fast:disabled for 5 minutes
View 4 Replies View RelatedI need to change the default zoom level for Evince. There must be some way to do this. Besides, can Evince start without any PDF file loaded? Also, what is the command line to execute evince? (I run Linux Mint 8 based on Koala 9.10). Whenever it loads a file for which it assigns a zoom level more than 175% or 200%, the whole PC hangs if I click on the "reduce zoom" icon in the toolbar. This is a very big regression.
This is ridiculous! Even ePDFViewer is better than this. I really would like to stay with Evince for the time being, and not need to move to Foxit.
I have installed openSUSE 11.2 in my PC. To enable compiz I have download and installed (using OneClick) the nVidia driver for my nVidia GForce 8500GT video card.I need to enable the 'Enhanced Zoom' because I'm a low vision user and I need a magnifier better than Orca.The problem is that when i try to enable it (from ccsm) there isn't any zoom... I try to press META (or Super) and scroll with wheel (SUPER + Button 4) but nothing.
I have see that if I press Super+2 (increase zoom) the mouse pointer moves to a specific screen zone but the screen will not zoom.
When I zoom out to see all my virtual desktops using the expo plugin in compiz, it displays them side by side. I want to make the windows bigger. I have four virtual desktops and would prefer to have it display two in one row and two in another row so that I can get a better view of what's going on in them. Is there a way to do that?
View 2 Replies View RelatedHow might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.
View 3 Replies View RelatedI am an experienced redHat/Fedora sysadmin but I'm completely new to ubuntu/debian world and the-way-the-things-works. I am trying to understand a few things. One of them is security related. Is AppArmor an extra security layer that protects individual services based in what is the normal and expected behavior, right? Why it is disabled in all run levels expect level 6 (reboot?)? Should I enable it on all run-levels? Should I select which service to protect or the defaults are fine ?
Is netfilter, the basic packet filter on Ubuntu 9.10? I founded iptables and I installed firestarter, but looks like firestarter is protecting nothing from outside, based on this iptables -L output:
Code:
Chain INPUT (policy DROP)
target port opt source destination
ACCEPT all anywhere anywhere
This is right? The default policy is DROP but there is a rule that allows anything from anywhere? This make any sense ? And finally, what is ufw and why it is disabled in all runlevels? Is ufw a replacement for iptables, or firestarter or it is a completely new animal? Should I use ufw instead firestarter? I am impressed about how different is Ubuntu/debian from other RH based distros. I just realize how much I have to learn about this new stuff.
I have freshly installed an Ubuntu 10.04.1 by internet.
All is running well, but my nice values are all set to 0. Is there a script that handles these at boot time? How can I reset them to "appropriate" or "normal" levels (e.g. not all at 0)? I know in other installs, my nice levels vary depending on the process and the user.
Attached is a screen shot of my gnome-system-monitor, and aside from init, which I had set to -15, all others are at 0.
Computer specifications:
Linux AMD-LNX000 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 GNU/Linux
AMD Athlon 64 Processor 3000+
[Code]....
I have a epson sx100 and i can't check my ink levels with esputil. This is what i get when i type the command.
pianoterra@pianoterra-desktop:~$ sudo escputil -r /dev/usblp0 -s
Escputil version 5.2.0-rc1, Copyright (C) 2000-2006 Robert Krawitz
Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l'
[Code].....
I also have another problem which is i can't change the permissions of /dev/usblp0 because i stupidly changed them in to read write execute to all using chmod 777 without thinking that the device file isn't executable. Why can't i change the permissions back as they were?
I was wondering if there is any kind of tool that i could use to check the ink levels in the printer. It is blinking that one of the carts is out but there is 4 in this printer. Its a pain in the **** having to hook it up and install it to a windows computer just so i can see what cart i need to replace. I went to System>Administration>Printing> Right clicked on the printer then went to Properties>Ink/toner levels> In the box it says "Marker levels are not reported for this printer" Hmm so basically i shouldn't use this printer?
View 2 Replies View RelatedI am using UNR 9.04 with Alsa 1.0.22.1 For some reason everytime I reboot my volume levels reset to headphone & speaker muted and headphone/speaker/PCM levels all set to 0%.
Does anyone know if there something I can that will allow my levels to be the same after I reboot? or if there is a script out there that will set my levels on startup?
If there isn't a script what would I do to create my own? also what would I do to have it auto run at startup?
Has anyone found a useful solution to monitor ink levels in a Canon MP 560 printer?
I was able to get the printer to work over a wireless network in Lucid but the printer properties do not show any ink levels.
I have a rather extensive mp3 collection.
The problem is some of the songs are louder than others, in other words set the volume and next thing a song comes along that scrambles your brains it's so loud, Or you get one you can't hardly hear.
I've used a couple of GUI's in the past, but all of them seem to do one song at a time. Not really an option with over 10,000 songs.
What would be nice is if I could pick one song as a base line and using terminal run a batch of say 500 songs through it.
Running 10.10 2 gig of memory
Use Rhythm box to handle music currently.
Been using since Dapper Drake, I'm not afraid of the command line, but I am far from an expert user, in other words I know just enough to be a danger to myself and others
I've never written a script file to automate anything but this may well be a time to learn one.
I've been using Ubuntu 10.10 for almost a year now and I'm really happy with it. I completely uninstall windows from my computer I'm able to do everything a used to do on Windows now on Linux, and even more... except for one thing... I cannot see the ink levels of my printer. It's a multifunction Epson Stylus TX110. I installed escputil and used the command "sudo escputil -i -u -r /dev/usblp0", the printer then starts making noise and no matter how long I wait, it never presents any info or displays the message: "device is busy" with no info about the ink levels.
View 6 Replies View RelatedI just recently installed ubuntu so I'm quite lost on some stuff. This little annoyance comes from the volume levels in Ubuntu 10.04. I have partitioned my computer to have dual boot into windows and ubuntu, so I know the problems are not related to the hardware itself as everything works just fine in windows. I am using a Dell Inspiron 9400, for reference.
The multimedia keys on the computer respond correctly but on the lower three volume settings sound completely drops out as if I had muted the computer. I went into the Alsa mixer to see if I could configure these sound levels and sure enough the master volume was down to zero, PCM and LFE are also low . I changed the settings of the lower levels but when I press on the volume up or down media keys to switch level the settings get reset. I tried just changing one level, exiting and saving through alsactl but it didn't stick. Even after reboot the settings are back to the zero volume on the first levels.
I'm new to Fedora and must say I love it. Previous Debian and Arch user but feel at home now. I'm after a difinitive answer for this issue as I can't seem to find what I need anywhere. I'm running Fedora 11 kde 4.2.4 with an Epson Photo Stylus RX425 printer / scanner combo connected via usb. Is there any way to moniter the ink levels in this printer? I'm tearing my hair out.
View 9 Replies View RelatedI am running F12 and I use Amarok to manage/play my music library.
I keep having a problem where the mixer 'Surround' in my alsa volume gets maxed whenever I switch tracks in Amarok. I want to stop this from happening because it causes my speakers to buzz just loudly enough to drive me crazy.
I have an SB Live! 5.1 (emu10k1) card.
I don't really now where this goes but figured i start in the general forum, mods please move as needed.I got my f12 install up and running great. I recently burned an audio cd. when i used it in my car i noticed i had to turn the volume up a lot more then on my other burned cds. previously i used my mac to burn cds. the mp3 files are the same, they are located on a external hd that both computers access. the difference is significant. any ideas on why this is?
View 4 Replies View RelatedI noticed that thare are different default priviliges for the user depending if I boot in run level 3 or 5. Normally I use init 5 and login in graphical mode straight to Gnome desktop. Then all my USB devices (memory and external USB sound card) are accessible and work. If I log in throught termina (init 3) then USB has to be mounted and the sound card is not recognized.
Is there any general rule for such behaviour? If I plan to use level 3 shall reconfigure the system go get immidiate acces to usb sound card?
Has this feature been removed from the version of Compiz that comes with 10.04?I was running 9.10 for a few months and I configured a feature for zooming out windows into a kind of preview mode.I remember setting up a key combo and when I clicked on any window and pressed the combo, it would cycle between 2 preview sizes of around 25% and 10% and then back to it's normal size.I could drag a zoomed-out window around the desktop but obviously it would not be usable until it was restored to normal size.
The window contents would still update though and it was a great way of keeping an eye on many windows at once.I have looked at every single setting in CompizConfig Settings Manager but it's nowhere to be found and I really miss it!
i have every effect working perfectly on gnome on my acer a110 netbook but cube seems to be proving difficult. Every time i drag a window along it seems to unfold not spin the cube.
Also how can i zoom out to see the cube on my netbook? on the desktop version IIRC system> preferences > advanced desktop effects > desktop cube < but it aint on the netbook
I have put a local marine chart as my wallpaper image (ubuntu 10.10). It's a high res tif image and looks good.
However, occasionally I'd like to zoom in on a particular point. Is there any way of doing this? (I'm not using compiz - as I don't need that level of eye candy).
I know I can open the image manually and zoom - but wondered if there was a way to do it on the wallpaper.
Is there a way to get a fullscreen zoom (eg. compiz's super+scroll) with Ubuntu 11.04 + Unity?
View 6 Replies View RelatedI want to, both, zoom using the SUPER key and the mouse wheel, and then releasing the SUPER key, while still somewhat zoomed-in, be able to scroll down/up the page with the mouse wheel.
I could do it before, but I can't figure out/find out how to do it now.
I am currently troubled with a very annoying problem - the volume level of the PC is jumping higher and lower at random intervals. It makes listening to music very difficult, as at times the music can go from just right to overly loud, just to fall right down so that it is hard to hear. I've only noticed this problem in the past few weeks, and I can definitely say it wasn't an issue in 9.10. This is a fresh install btw, not an upgrade.
Some details:
Using motherboard sound, Realtek HD Audio, iirc. Below is the output of lshw, with the irrelevant parts cut out.code...
Everytime I start the browser after log in Kubuntu the levels go back to the first one. I'm using Chrome 11.0.696.71
View 2 Replies View RelatedhHow would I add my SSH server to run levels 3,4,5? I have been trying to search google for this answer to my problem for hours and cannot have any luck.
View 2 Replies View RelatedI have CentoS 5.3 and switching init levels does not work.when I login console mode,doesnot work ctrl+F7 key...and on the contrary.when Im in graphical mode, does not work ctrl+F1...ctrl+F6 keys.
View 4 Replies View Related