OpenSUSE Multimedia :: Totem Still Plays Nothing And Get No Thumbnails Either
Jul 25, 2010
SM player works yes, but how do i get the thumbnail previews. I did a fresh install of opensuse, i installed the updates they Yast told me to. I followed the guide precisely this time, using the command line method and encountered some problems. 4 files, asked to be broken or use obsolete at the point where i have to do the switch to packman repository. I chose use obsolete cuz i didn't want to break anything. When i tried to set an mkv to open in SMplayer the optionw asn't there, only banshee and totem. I opened Yast and it told me to install opensuse codec installer and another file can't remember) which i did. The option to open files in SMplayer, Xine etc came up then.
I'd like to get the thumbnails and I'd like to see Totem work as well. I know i don't need to, but considering that i downloaded the neccesary codecs, i expect it to work :/ or am i wrong with that assumption On a totally unrelated note, is there a way to increase the resolution of the bootloader? i'd like to be 1920x1200 to full my screen
View 3 Replies
ADVERTISEMENT
Jul 17, 2010
restricted formats and i can play my videos with SMplayer, Xine, VLC etc but not Totem. Totem in 11.3 uses Gstreamer, and i believe i have all gstreamer plugins installed, good, bad, ugly, base etc. Also thumbnails won't show. Reason i want to use Totem? cuz it's integrated well with Gnome
THere's also this issue where everything i try to play wants to be played with banshee, how do i stop that? i tried going into Preferred applications and put it on custom, but i can't differentiate music and video, there's just a multimedia option.
I would like to have music autplayed with Banshee, and Video autoplayed with SMplayer without having to go through the right click, play with option :/
Full screen flash is aproblem in 11.3 64 bit just as it ALWAYS is in most distros i tried *sigh* there's stuttering, and i can't scroll through the video ideally.
For the sake of saving spack i have a non multimedia related question. How do i handle nzbs? in windows i use sabnzb which is cross platform, but their is only a Fedora RPM meaning i'll have to compile it for opensuse which i have NO Idea how to do. Alternative NZB handlers i can't find in the regular repositories or webpin.
View 9 Replies
View Related
Feb 10, 2010
My partner is a teacher and has downloaded some videos from a teacher's resource site but can't seem to play them in Ubuntu. They play fine in Windows XP using Windows Media Player but they only play a few seconds in VLC or Totem and then freeze. The files in question seem to be normal MPG (MPEG-1) video files but somehow VLC and Totem choke on them. I have installed all restricted video formats including w32codecs but still no joy. My partner is threatening to go back to Windows!
View 2 Replies
View Related
May 31, 2010
I'm on Kubuntu 9.10, using Totem to play .wmv files, and certain of them cause the player to search for an audio codec (wmap?) that is never found. The video played without audio after that. So I followed advice to remove ~/.gstreamer-0.10, and reboot. A new .gstreamer-0.10 directory appeared, but now, Totem will not even play the video. It recognizes the audio codec however. The video codec shows up as "Windows Media..." but resolution is 0 x 0, and nothing ever appears in the window. I tried uninstalling and re-installing w32codecs and non-free-codecs, and removing the registry files under ~/gstreamer-0.10 and using gst-inspect to rebuild the database,
but nothing helps.
View 1 Replies
View Related
Aug 12, 2010
I want to play .wmv files. I can play them in VLC successfullt but they are not getting played in Totem. I've installed all the codecs. What to do??
View 9 Replies
View Related
Aug 7, 2011
Since kernel update 2.6.40 Totem plays video like in Fast Forward (no sound). Reverting to 2.6.38 solves the problem.
View 3 Replies
View Related
Mar 10, 2011
I am using GNOME and KDE with 11.3 and want to get thumbnails for videos in file manager like nautilus,dolphin though tried using mplayerthumbsconfig and changed engine to mplayer from phonon but no gain. For more information in only nautilus I get 3 thumbnails of three flv videos but rest flv and others doesn't show up.
View 2 Replies
View Related
Dec 9, 2009
After a fresh install of opensuse 11.2 I followed the multimedia guide to install mm-support. Sound is working, results in xine are excellent. Compared to 11.1, vlc now plays sound with drops about every second. To be more precise: sound is ok for several seconds, then a first drop appears. Thereafter the time between the following drops slowly shortens. After a minute or so, the drops come in intervals of about a second.
View 5 Replies
View Related
Feb 23, 2010
I have recently installed openSuse 11.2/Gnome. I am having some woes. Vlc plays CDs and DVDs but Xine or Mplayer won't.
[Code]....
View 1 Replies
View Related
Nov 11, 2010
I am using itunes on Windows to listen to different radio shows and I am interested if there is any application in openSUSE that can automatically read the link to the podcast as it is present on apple's page.I found a way to play the podcast thru Amarok but I had to convert somehow the link from apple to some xml that Amarok can understand. I'm thinking maybe if there is something more straightforward.
View 4 Replies
View Related
Jan 9, 2010
What should I do to be able to play WMV files in Totem like in Ubuntu?
View 4 Replies
View Related
Jul 14, 2010
I opened a video file in totem and got a slide-show of 1 frame in 5 seconds. I then opened it in Kaffeine-KDE3 and it worked perfectly. What should I do to heve good speed in Gnome?
View 6 Replies
View Related
Oct 6, 2010
The volume icon is off.No sound. Other multimedia players are ok.
View 3 Replies
View Related
Jun 1, 2011
I have 11.4 in a kiosk environment and only want VLC as my video plug-in. Since 11.4 FireFox crashes whenever it tries to using the application/x-VLC player type. I've tried disabling Totem, selecting VLC as the application/x-VLC type but nothing works. I'd just like to uninstall the Totem plugins completely but don't know how... or find a way to make VLC work in 11.4 with Firefox 4. I installed FF 4.0.1 but no change.
View 3 Replies
View Related
Oct 11, 2010
Just installed Open Suse 11.3 on my dual-boot PC ( and Ubuntu 10.10). Installation process of both OS goes well and smooth. But, unfortunately when I tried to play movies on both default applications (Banshee and Totem) in Open Suse Gnome 11.3, I've got the message to search for XVID MPEG-4 decoder. And till now, I still unable to search for it, because there's still no sound or a little sound on both players.
View 3 Replies
View Related
Jul 23, 2010
Totem and Banshee don't seem to want to play .avi files, Kaffeine, SMplayer work perfectly though. I followed the Multimedia guide, and switched system packages to Packman.
View 2 Replies
View Related
Jul 17, 2010
I just did a fresh install of openSUSE 11.3 32bit GNOME on my notebook and everything runs fine...yet
But there is an issue with the sound playback on mp4's and quicktime (apple trailers) that I was not able to fix.
I added the Packman 11.3 repo via Yast -> Software Repositories -> Add... -> Community Repositories
Then I used zypper to get the related gstreamer-plugins ffmpeg faad vlc w32codec-all libmp4v2...
So far the media playback seem good, except the issue of "no sound with gstreamer related media players on quicktime and mp4"...
I set all available/related/installed packages to "Packman" (Yast -> Software Management), did zypper refresh + zypper up but I am simply not able to get sound from gstreamer...It works fine in VLC though!
Some google and forum research showed that it's an issue that has occurred over the recent years but I could not found a proper working solution.
If I run totem from the terminal I get the following output (plus a windows asking for permission to search for the required codec 'MPEG-4 AAC Decoder'...but it is not able to find one!):
Code:
# totem --debug --play TV-20100717-2030-1301.h264.mp4
(totem:6888): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle
(totem:6888): Totem-DEBUG: Setting initial properties
(totem:6888): Totem-DEBUG: Sending SaveYourselfDone(True) for initial SaveYourself
(totem:6888): Totem-DEBUG: Received SaveComplete message in state save-yourself-done
(totem:6888): Totem-DEBUG: totem_playlist_add_one_mrl (): TV-20100717-2030-1301.h264.mp4 (null) (null)
code....
The last Message is interesting "All missing plugins are blacklisted..." hmmm I did not blacklist any plugins...where can you see these blacklist? Is that the point, the plugin is there but blacklisted?
View 9 Replies
View Related
Sep 2, 2010
I was just playing with Fedora 13 and found that when I try to watch any AVI file it searches all required Codecs from RPM Fusion repository and install it. I was just wondering if this can be done on the openSUSE because what I know about Fedora is, it doesn't customize the products and uses as it is. If someone know how to enable such Autodetecting in Totem.
View 6 Replies
View Related
Apr 8, 2011
... with an error message box stating that :
"The playback of this movie requires a GStreamer element audioconvert plugin which is not installed."
View 1 Replies
View Related
Dec 29, 2009
openSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
View 4 Replies
View Related
Jun 27, 2010
I had system problems and I decided to do a fresh install and I could only save my home folder and be sure that my system worked. Ever since my new videos never had thumbnails. Is there any way to make sure they do have thumbnails for easy browsing.
View 1 Replies
View Related
Apr 9, 2011
I'm running 64-bit Debian testing Xfce and can't get Thunar to generate thumbnails for video-files in ogg-format. It works for avi, mp4, flv, etc. I have thunar-thumbnailer and ffmpegthumbnailer installed.
View 1 Replies
View Related
Aug 23, 2010
When I open Thunar, I can see thumbnails of jpegs, but notfor video,or document files. I've got the Thumbnailers package installed as part of XFCE Goodies,nd also ffmpegthumbnailers (? I think, I'm at work so can't check). I've looked for a setting to change, but can't see anything relevant. previous installations have allowed me to have beautiful thumnail icon
View 5 Replies
View Related
Jul 3, 2010
I have a Panasonic G1 digital camera this outputs raw files in Panasonic's own format (suffix .rw2). UfRaw and RawTherapee can both read these so I can work on them in ubuntu (though ufraw displays a very overexposed image at first). f-spot has problems and displays a funny pinkish mess.
Can I get F-spot to display .rw2 thumbnails?
I would actually like to get Gnome to be able to display panasonic raw thumbnails as well. Is this possible?
As an aside it would be one in the eye for windoz as Panasonic have not released a codec for XP, only for Vista and 7 (and it seams to have a nasty hook in it according to dp review)
View 3 Replies
View Related
Jul 24, 2010
I have a 3TB home server storing all my files and a mix of XP, Vista & Ubuntu clients on a Gigabit network. When I access a folder with JPEG photos on the XP or Vista machines and I have them set to display thumbnails that is exactly what I get. The thumbnails load nice and fast. When I access the same folders on the Ubuntu machines with "icon view" it only displays a black icon that says "JPG" but if I copy that folder over to a local drive on the Ubuntu machines then the thumbs display just fine. Does anyone have any idea how to change this on the Ubuntu machines so they load thumbnails for networked photos as well?
View 1 Replies
View Related
May 11, 2013
I have a problem with nautilus thumbnails since a few days. I checked they are indeed generated in .thumbnails, but all I got in nautilus is the "loading.." icon instead of the thumbnail, for all kind of files (pdf, image, video..) + a high cpu load.
I really don't see what to look at here, didn't found any trace of error in several logs/debug tool like gdb (and btw does nautilus have log abilities?)
I don't know which change could have triggered this (it used to work fine), maybe adding the i386 compatibilty with "dpkg --add-architecture i386" ? (I did this a few days ago in order to install acrobat reader)
Also I've been copying all of the home folder files from my previous ubuntu account to the new debian one, maybe I broke something in the process ?
hint0: thumbnails are displayed fine under thunar
Solved due to this post: [URL] ....
I just did:
Code: Select allln -s ~/.thumbnails ~/.cache/thumbnails
and my thumbnails are back
Debian sid + XFCE4+compiz on a dell latitude e6530
View 8 Replies
View Related
Oct 17, 2010
I need a way to create wmv video thumbnails with file information (name, size, resolution, duration) using Ubuntu.
View 6 Replies
View Related
Sep 13, 2009
I tried to search about this from google and opensuse forums but didn't find any help, so I'm starting this topic.I just updated to OpenSUSE 11.1 with newest gnome and default kernel. The problem is, I don't have video thumbnails any more in nautilus. If I recall correctly, in 11.0 I had them with totem-xine, but now I can't find it in any repos. Added some additional repositories, but still nothing.
If there is not totem-xine available, how to get video thumbnails, I mean like generating automatically every time I open a folder with video files in it.
View 9 Replies
View Related
Feb 12, 2010
Where does FireFox store thumbnails? I want to dump them without dumping my cache.
View 7 Replies
View Related
Aug 16, 2010
Is there a way to enable thumbnails in Konqueror in 11.3? mplayer-thumbs is missing from the repository I noticed.
View 8 Replies
View Related
