fter booting into openSUSE 11.4 kernel 2.6.37.6-0.5-default, I cannot move the mouse cursor at all. Its light went off. I have MS Netbook Optical Mouse 3000. My Desktop has AMD Athlon X2 CPU.I can use the mouse with openSUSE 12.1 M2, Windows 7 and other distros in the same machine but somehow cannot with openSUSE 11.4
View 5 Replies
I recently installed KDE (I was using GNOME). After that, I found for gnome applications, KDE font settings is applied even when I log in using GNOME. Whatever I do in appearance-fonts, all gnome applications follow the settings from KDE Personal Settings. (Application Appearance -> Fonts)
I lost all the subpixel hinting, and I finally just found out that if I set it in KDE Personal Settings it actually affects gnome applications. (I'm in GNOME now)
I am having with my openSUSE upgrade.
I followed the upgrade directions, found here, precisely. However, I am still experiencing some unusual problems, some I think I have resolved, but others are leaving me puzzled.
Before I get to far into this, my working knowledge of *NIX platforms is decent, but I am no where close to expert or advanced.
Problem 1 - KDE Profiles (resolved)
The first problem I experienced was that my KDE profiles were all screwed up, buttons would not work, desktop icons were missing, applications would not start or would show horrid graphics, and the list goes on. Having run through a similar problem with FreeBSD, I decided to simply move my ~/.kde4 to ~/.kde4.orig and then do a forced reinstall of KDE4. This seems to have resolved the issue, I just have to recreate my profile, which should be relatively simple.
Problem 2 - Sound Driver
Shortly after my upgrade, I did have sound, but I had lost control of the volume. This is somewhat expected as with each Kernel update of Linux, I found I had to reinstall the sound drivers, Creative X-Fi. This never presented a problem as it was a 30 second process and very simple to perform (there were three commands, four if you include 'su -'). This time, I ended up running into an error, seen below:
Code:
This brings me to my third problem...
Problem 3 - VMware
Similar to the sound card, each time a new Kernel patch is applied, I have to recompile VMware Workstation 6.5 for it to work again. This is even simpler than the sound drivers as all I do is start VMware and it automatically recompiles. Now, when I go to start it, I receive the two following errors:
This appears upon trying to start VMware Workstation...
This appears when I click 'Install'...
Problem 4 - Kernel...
The previous two problems seem to be related to some underlying kernel issue that I have yet to be able to resolve. I have barely been able to change the error messages. So far I have forced a reinstall of almost everything kernel related that was already installed, plus I installed quite a few *-devel packages. I reinstalled 'make' and 'gcc' for good measure, but I am not getting anywhere.
I used easystroke on ubuntu, and it worked well enough to be functional. I triend opening Xstroke in suse, but it just adds an icon down by the notification panel. right click and left click seem to turn it on and off, but i've yet to find any configuration menu of any kind. I've also found the 'input actions' section of the personal settings menu, but i'm having a hard time making heads or tails of it. Basically, what I need is pretty simple. I have a single application that I would like to add more control functionality through the mouse. I don't even necessarily need gesture control, in fact if i could just make my extra mouse buttons perform specific keyboard commands (F11, ctrl++, etc.) that would be fantastic. If I could set it to do different things on different programs.
View 1 Replies View RelatedMy mouse and trackpad button control is severely impaired in 11.3, KDE 4.5.1 (or .2) using Compiz. Gnome works fine. XFCE has some problems. The mouse control of window features is sometimes limited to one window with the rest of the desktop not responding to mouse actions. Popping up a second window from an app causes the mouse control to be completely lost. The issue leaves KDE effectively broken having only keyboard control. With some ESC key hits and using right mouse button to close one app (from the panel), I can move focus to another app but mouse control within the app is non-existent. Moving windows or raising or lowering doesn't work either. Sometimes, the GUI captures the mouse click but does not recognize the active App and applies it to objects sitting on the desktop screen underneath.
I've reverted partially back to the 11.3 installation DVD then reload updates and then moved to stable release of 4.5, then went back to the 4.5 factory. All failed to correct the problem. I removed .kde/.kde4 files and this did not help. What is wrong with my system? Also installed the latest kernel of the repos then reverted back to 2.6.34.7-0.3 [x64]. [very frustrating, been using Suse/KDE for >7 yrs, this one has me stumped]
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies View Relatedhow to regain some type of display. I was trying to get a printer online. The printer was recognized but would not print. I went away from the machine for a few hours and when I came back I had a blank screen. I turned the machine off but nothing comes back up. All key strokes fail to give me anything.
View 6 Replies View RelatedWhen I try to adjust the mouse and keyboard parameters, changes aren't applied. I adjust them to were I want to, click on accept, but then when I look on the settings again, they are set to default again. This must be some kind of bug. I already updated using the LXDE repository.
View 9 Replies View RelatedI was working on something important in 11.2 and did a "zypper up" in the terminal in the background. I wasn't paying that much attention to it, I believe it was an update to 11.3. After returning to the computer after about one hour the windows were behaving strangely and the machine wasn't very responsive. I decided to reboot. Now at login I have neither mouse nor keyboard. I have switched the keyboard to PS2 model, no difference. If someone could help me with booting to run level 3 from the grub menu perhaps I could change some settings there to make everything work. I really regret doing the update. It would be very important for me to be able to get back in to machine with spending as little time as possible on this. Could I reverse the update? This machine is very important for me and my family for their daily communication, but currently I have very little time to fix this. My quick fix was to install Kubuntu 10.10 so I could resume working, but I would really need to get back in to 11.2.
View 9 Replies View RelatedSuddenly, my windows have no borders, and I have little control of them -- no moving, minimizing, or maximizing. I can't access these functions because there is no bar at the top, but they also don't respond to pressing the Alt key. My mouse cursor is the generic "X" that XWindows starts with.
The obvious solution is to change my settings, but I can't: when I try to open window manager settings, the disk spins a little but nothing shows up.
Another solution would be to try a different window manager, but this fails on a different problem that I have been having for some time. If I log out and then click on my user name to log back in, nothing happens -- I do not get a password box, just the same user selector that I started with. I use Xfce and I don't know how to switch.
I accidentally removed the volume control icon on the top panel of my desktop. How do I get it back. I'm on 10.04 if that matters.
View 5 Replies View RelatedUsing Natty Narwhal, sound works, but the icon disappeared up in the panel. Not that big a deal, other than it shouldn't have happened, so its go t me curious.
View 1 Replies View RelatedAs per the title, the per application volume mixer has disappeared and I can no longer unmute things i have previously muted.
View 2 Replies View Relatedmy issue is as my Title "Lost Top Sound Icon & Can't control volume with Keyboard" OS: Ubutnu 9.10 x64 - Karmic Koala Lost the Top Panel Sound Icon, I even go to: System > Preferences > Sound Message Pops Up: Waiting for sound system to respond
Funny thing I do get Ubuntu OS Audio sounds Now as well I lost control of my Volume with my Keyboard, pretty sure it has to do with the same Sound icon in the Top panel that is missing The only way I can control Audio is Manually using: gnome-alsamixer 0.9.7
It sucks big time, because I can't control my Audio when ever I need to mute it or upper/lower it through my keyboard fastly when needed. having to manually opening an application to be able to change/control the Audio volume is a huge hassle for me
[Code]...
I want to exhaust all the possibilities so I'm going to ask this hereI am installing a Suse 11 on IBM Blade Center using Remote Control.when using this is impossible to use the mouse I see the mouse but I have no control over it I try to move it but no way it moves to fast s no way to controlso could this be an issue on Suse 11? Resolution?is there is no way to fix that is there a way to install Suse on Text Mode?
View 2 Replies View RelatedThis has been bugging me for a few weeks now all of a sudden i lost my email icon chat etc and the volume icon in the top notification area.
i have tried deleting and re adding the notification area back but they are still missing.
also sometime when i boot up i loose my minimize and close window icons on the windows???
not sure if this connected i am running Ubuntu 10.04 on a dell vostro 200
This is weird. When I start my computer, the cursor is frozen in place and the only way I have been able to get it moving is to do a hard restart. This has be a consistent problem for last few days. What's going on? How do I correct it?
View 2 Replies View RelatedRunning Lucid, has been a bit glitch here and there, but generally ok. I use Audacity a lot, so need "drag" with the mouse. Also "drag" on the desktop has gone totally now it just opens the file or folder. Any mouse control app that works? Using a ps2 led mouse, it works fine under wine/crossover apps.
View 9 Replies View RelatedI'm using the Logitech MX1100 mouse which has a quite a few buttons. (10) I would like to use 2 of them for volume control (as I do for Windows) but have no idea how to in ubuntu 9.10. Is there any way I could map the buttons to control volume? I'm a minor noob so keep it simple.
View 9 Replies View RelatedIs it possible to control the mouse position from the command line? I want to centre the pointer in the middle of the screen
View 8 Replies View RelatedI have 2 computers running Ubuntu 10.04, One of them have a screen, keyboard and mouse connected (all wired)I want to control the other computer in some way, like a virtual PC in a window, via my network or a cable.
View 4 Replies View RelatedI was just wondering if there is any program/script/code/trick/way to get the arrow keys to control the mouse pointer and, well basically, the keyboard to do stuff you would do with the mouse..?
And i know about keyboard shortccuts
P.S.: Anyone wanna go searching for 'The Beach' in thailand?
In the past few days Ive noticed a lot of updates. Yesterday morning several times I went to click on items on my desktop and I couldnt. I thought it was just my batteries getting weak. Yesterday afternoon it got so bad I couldnt click on anything for hours at a time. I could only power offIve been reading lots of forums and threadsd there are lots of possible problems to this but they all come down to xorg file and usb issues.
An example of one possible problem: When I have the system log open I can not move the app around, make it bigger or smaller, I can only scroll on the right pane and have to use the mouse keys to navigate the left pane. And if I want to shut the app down, sometimes I can use the ctl+F to close it but sometimes I cant.After I shut the app, any app that is, the mouse pointer turns to |< and I cant click on anything for 5 min to 5 hours. It was suggested to run sudo dpkg �reconfigure �phigh xserver-xorg but when I did I didnt see anything visually or in the terminal occur.
I have been using Tvtime for several years and never had trouble with the video until now. Now it opens, but it's frozen. There is no picture and no sound, just a black screen that I can't control in any way. Even to close it, I have to go through the terminal.I can still get channels using Mplayer, so the tuner should not be the problem. However, t is an Hauppauge 950.I was using Lucid on both partitions. Initially, one quit,but not the other. About a month later the other quit while I was watching which makes me think it may be something I have simply hit on the keyboard. I have since upgraded to Maverick on one and reinstalled Tvtime to no avail
View 3 Replies View RelatedIs there any software that can do that? I would hate to have to run the android emulator software and run remotedroid on it.... so many wasted resources for a simple program. Any one know of an app that would let me do this that is made for linux? (specifically ubuntu)?
View 5 Replies View RelatedSince a while,the energy-saver shuts down the screeago,it happens after half an hour,but I didn�t set it up in that orders !It makes menervous,short time away from the comp,and soon the screen is dark!And the screensaver will not appear any more,too.I tried to enlarge the times in the energy-manager,created a new profile,switched off the laptopmode-service,nothing helps!And it seems,if there is no possibility to set one of the profiles up,they can only be changed,deleted or newly created.Is there really no place to force it to the required settings?Under the good old KDE3.5,it was no problem,to get it work like I want it to.My 64-bit system runs under openSUSE 11.3 and KDE 4.4.Is here any salvation for my nerves
View 3 Replies View RelatedIn Fedora 12, I am trying to use a program that uses uinput to inject mouse events to control X applications. This worked with Fedora 9, but doesn't with Fedora 12. I see the following in my Xorg.0.log:
(II) config/hal: Adding input device Prototype IRPointer Device
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
[Code]...
The device is not a synaptics touchpad, and so the X load of the driver is incorrect. But I don't know how to get X to ignore it's own driver and use evdev. (Or even if that's the right thing.) A general explanation of how hal and evdev are related, for the current X server,
Redhat Ent Linux ES Release 2 (Taroon 8)
Kernel 2.4.21-4.ELsmp
startx(1): initialize X session - Linux man page
I thought I'd look into methods of recovering from a lost password for future use, how to change the passwd and shadow should I need to. So I started an X session, vi'd my .swp files then logged off. Perhaps I changed one of these files accidentally, but my intent was just to view them which I did. After starting up my computer the next day and logging in I began an X session - "startx". The session appears to have started, but with a black screen and an active mouse cursor.
After upgrading from 10.10 to 11.04, at first everything worked fine. Then i changed the compiz configuration to cube, confirmed some questions, and now i have no window decorations. No icons for close, minimize, maximize. No resizing by mouse. No title bar.
In the launcher, i lost applications and files&?, and in the top menu bar, i lost the leftmost part, where some menus and the Ubuntu icon were found.
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View Related
