after i made the change to my shell type, that from SH to TCH, and back again, i lost my coloring for my file system, if you know what i mean, folders always come in blue, and devices in yellow hope you understand? now everything i do can't seem to differentiated between files colors anymore.
View 7 Repliesstill cant seem to get my file coloring back. normally directories are colored blue, devices yellow etc, ever since i made a change to my shell, and back again, i lost my coloring for directories
View 2 Replies View RelatedBecause I have to stare at my command prompt all the time on my computer, it should look at least half-decent, so I am trying to get it colored. The expected outcome is as seen on this site. I have the colors I want set in my .Xdefaults file, but they of course do not color my prompt.
[Code]....
I use Markdown to store all of my source documents. Unfortunately, the .md extension maps to application/x-genesis-rom under Ubuntu. I'm not sure why that would be a system default MIME type, but I'd like to change it.
I've tried using:
Code:
gksu assogiate
to modify my file type cache. Unfortunately, even as the SU, I can't modify the entry for this file type. The "Remove" button is inactivated for the entry. (See attachment.)
How can I get rid of this (obsolete?) file association? Alternatively, how can I make my new one (text/x-markdown) take precedence?
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
Every once in a while on a computer I'm ssh'd into, I will accidentally type "cat largefile.txt" and my screen will start rushing with text for the next 10 minutes. I'm always working in a screen session, so my current solution is to just log out and then log back in, and since it can go 100X faster when I'm logged out, it'll finish in the short time it takes me to type my password in again. Is there a better way? Either involving the fact I'm in a screen session? Or a way to do this within SSH? What doesn't work: detaching from the screen session (doesn't respond until file is done outputting) trying command to move to a different window in the screen session (also doesn't respond) typing ctrl+C to kill cat command (also doesn't respond, probably because the command is done and the buffers just have to catch up).
View 3 Replies View RelatedThe output of my fdisk command is as follows :-zodiac@gml-admin:~$ sudo fdisk -l[sudo] password for zodiac: Disk /dev/sda: 160.0 GB, 160041885696 bytes255 heads, 63sectors/track, 19457 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe30ce30c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1958 15727603+ 7 HPFS/NTFS
/dev/sda2 1959 4752 22437838 f W95 Ext'd (LBA)
[code]...
I need commands which five me the following details abt all the file systems mounted the linux box
type
mount pt
file system id
I had only Arch on an HDD.sda2 was "/".Now it's with Windows XP and sda2 is not a root any more but a container partition wich has sda{5,6,7} in it. I configured the dual boot and it works. It finds Arch and boots it, but not completely. Stops after some time and says: unable to determine the file system type of /dev/sda2. FSTAB is configured, sda{5,6,7} are on their places. So I can't boot Arch. XP boots correctly. What do I do with this error?Also it says: try adding rootfstype=your_filesystem_type to kernel command line.
View 4 Replies View RelatedHow well is the ext4 new file system mounting compatibility with the older ext3 previous Linux installations ? I refer to Ubuntu 9.04 and the new Fedora 11 which have the option to install with the ext4 file format. Will it be better if I install with the older ext3, so that I will be able to mount all other Linux from each other in a multi-boot system ?
View 6 Replies View Relatedsomebody help me how to back up my ubuntu 10.10 file system?
View 1 Replies View RelatedI am trying to install OpenSuse 11.3 x64 via EFI. I successfully performed a Windows 7 install and I'm trying to do the same thing with OpenSuse now. My system boots into the EFI shell. I can cd into the /efi/boot/ folder and run bootx64.efi. Immediately after I press enter I am presented with an ELILO boot: prompt which either eventually times out and continues or I can press enter and have it continue. Either way my system resets and just boots back to the EFI shell again.
Running bootx64.efi worked for starting the Windows 7 setup but it doesn't appear to be working with OpenSuse. Is this a broken feature or am I doing something wrong?
I am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
i was trying to follow a guid about how to change the icon for a specified file type (in my case .c,.h,.asm,cpp) , and that by adding the icon png to the /usr/share/icons/gnome/48x48/mimetypes/text-x-csrc.png
after following the procedure the icons for all .c files have changed but not in the file manager icon view
only in List view as you can see from the screenshot
so how can i set those icons?
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
How do i change file type associations? i looked but i don't see anything...i'm having that problem where google chrome won't stya set as default and i fixed it in fedora by changing the file associations manually :-)
View 1 Replies View RelatedI am using Ubuntu 11.04 - the Natty Narwhal with GNOME 2.32.1. I want to change icon of specific file type (like all files having .py or .pl extension). I Google it and have tried all the possible methods but nothing works
View 1 Replies View Relatedhow to change the file type of /opt to vfat from ext 4. during installing fedora 15 (64 bit) on dell inspiron 1545, i choose file type of /opt as ext4 but now i have realised that it should be vfat. ans second problem during the installation the option of repository appeared and i choose "customize later ", and now i have to add some lib in "software tab", how can i achieve that?
View 3 Replies View RelatedI have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
when I got following some information using fdisk -l,there were some invalid information about system name.I installed file system reiserfs, xfs on sdb6, sdb7.but the system didn't recognizes disk's file system name.
View 1 Replies View Relatedhow can I create a shell script for ssh where I don't have to type the password manually?I have learned expect command and I have tried multiple examples, but it didn't work.
View 7 Replies View RelatedI have a motorola bmc 9012 dvr and am attempting to connect an external hard drive to it via usb. when i plug in the external hd the dvr recognizes it and wants to format the hd. i let it format the hd but now i can not view the hd from my windows machine. anyone have an idea of what type of file system the dvr formatted the hd with?
View 4 Replies View RelatedWhen I run 'parted' and then type 'print' to see the partitions that are available, I see two entries: /dev/sda1 and /dev/sda2. /dev/sda1 is of ext3 type whereas for /dev/sda2 nothing is specified for file system type. The LVM flags are set for /dev/sda2.
When I tried to resize /dev/sda2, it gives me the error "File system type not recognized". let me know how to find out the file system type of the partition.
A directory /test/test1 is created & under /test1 there are some files & subdirectories with data in it. I had copied the files (text & script files) with command as,
cp -irv /test/test1/.* /test as per the requirement but what i see in destinarion i.e, /test that no files or directory has been copied in /test & the files/directories is also removed from source i.e, /test/test1
so my query is how can i get the files/directories back with data?
I have a box that's used as an SFTP server. All users have restricted shell so they can only use SFTP to send and receive files. But it makes it hard to have them change their passwords. I thought that if we had a web page set up where the user could enter their username, old password, new password and confirmed new password, that this would be the easiest solution.
View 1 Replies View RelatedAt work I'm using a windows box with local and network drives. One of drives I have mapped is my Linux home directory (We have separate windows and linux accounts and home directories here). When I view it from windows, all of the files and folders beginning with . are shown, as would be expected. (Although . and .. aren't in any folder)
Just wondering if there is a way to tell windows to not show anything starting with a dot. I was hoping there's a registry entry or something that defines what a 'protected operating system file' is, so I could put dot files in the same category as thumbs.db etc.
How do I go about mounting a device if I don't know the file system type (e.g ext3, NTFS)?
View 4 Replies View Relatedtasks of an administrative level that we can use Shell Script to automate them. It's a kind of homework for me to figure out how to automate those tasks. Using PHP and Shell Script design and develop a Web Interface to change or set the IP Address and Subnet Mask of the UNIX / Linux System. The related services must be restarted automatically for the new IP Address and Subnet Mask to take effect. No user name and password should be asked for when using that Web Interface. How would you do it?
View 10 Replies View RelatedIn linux how do I to get the ascii decimal/hex/oct code from a char or a ascii char from a decimal/hex/oct code. I see from the gnu sed user manual that I can use the d# o# x# to specify a character but I am not sure how to use that. If some one has a better way to get the the ` and ' chars through I want to sed with the backtick '`' character and ''' single quote character.
sed '/`/p'
these don't work
sed '/'/p'
sed '/`/p'
I have a file called a.sql which I need to execute in a database and the script I am calling in a shell script .Before executing the script I have to change a value in the script according to the user input.How can I do this .
Eg...
A.sql file contains an sql query like this:
And My shll script is like this:
When executed the script it asks for enter salary and if the user has input 5000 then the Enter_salary value in a.sql must be replaced by 5000.