I just install an open Suse 11.2 on a nex box,with an ps2 to usb adapter(ps2 keyboard & ps2 mouse are both attached to this adapter) the keyboard is ok,but the mouse is only mooving horizental, in a line (from left to rigth)i can't move the mouse vertical nor to any other direction
View 4 RepliesI'm finally switching (slowly) from KDE3 to 4 (in 11.3). There are 2
things I so far haven't figured out:
1. How do I turn off the tooltips which appear when the mouse moves over
a desktop icon?
2. How can I assign a keyboard shortcut to minimize a window?
I am using Ubuntu 10.04 on a laptop with a Synaptics touchpad. While testing an install of Bluetooth drivers I booted my computer into recovery mode so I could find out if Bluetooth worked before networking was installed. The system reconfigured the graphics to low VGA which disabled the mouse. I rebooted (normal startup) uninstalled the bluetooth drivers, but my mouse still won't work. The mouse pointer appears in the middle of the computer screen, and stays there.Enabling mouse keys support enables me to move the mouse by holding the Function key and pressing numpad characters,t this is only a temporary solution.
View 2 Replies View RelatedI am using a wireless Xbox 360 controller with openSUSE 11.1. I use it for some emulators and all buttons work fine. There is however an annoying problem, the Xbox controller left joystick controls the cursor and digital pad acts as mouse buttons. So while I play, the cursor moves all around the screen and bad things could happen. Why this behavior? In xorg.conf there seems to be only just 1 mouse. And if I go in Joystick via YaST, there is only a menu to select which joystick I have. But my wireless controller has been automatically detected, I didn't setup anything. Is there a config file that I can modify to stop controlling the mouse with my gamepad?
View 6 Replies View RelatedI have a Dell Vostro 1220, with Intel 4 Series Express Chipset Family graphics card. I work on OpenSuse 11.3 (64bit), on the latest kde.I work on an extended 1680x1050 screen on the left of my laptop screen (1280x800). I set this with Kxrandr and it worked great,a while... Now, it shows a black band on the right side of my laptop screen. I can live with that. But the mouse does not recalculate for this difference, so that I need to click 1 inch to the right of where I want to click.
View 2 Replies View Relatedwhen I sat down at the computer, the mouse cursor continually moves down at a constant rate. It jumps a certain distance regularly until it reaches the bottom of the screen. The mouse works generally. It moves around as I move the mouse,but there is the constant moving down, so it's pretty much unusable.I clicked all the mouse buttons, restarted the mouse.
View 3 Replies View Relatedit just happened a few days ago. When i log in i pres ''Num lock'' and i type the password but after loging in the numeric keyboard won't work. I tried num lock several times but it doesn't work. It works in windows 7 so it's not a hardware problem.when i press number keys it will actualy move the mouse (8-up,6-right 2-down etc.).
View 2 Replies View RelatedSun VBox
host - Debian 5.0
VM - Ubuntu 10.04 (lucid)
gnome desktop
rdesktop
Running rdesktop to connect the VM on the host connection can be established with VM desktop displayed on the host desktop. But there are 2 mouse pointers on VM desktop. It is difficult to control. One mouse pointer does not work but hanging there. 2 pointers moves simultaneously.
I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause.
System:
CPU: i7-920
Memory: 12G of Patriot DDR3, 6 modules
OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome
Main board: Asus P6T
Video: two Nvidia 9500GT connected to three displays
I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there.
Little background info: I have a computer where the hdd crashed. Bought a new hdd tonight and installed it. As the computer had no operating system at this point I put in a copy of the live cd and begin to install Ubuntu 9.10(32 bit)...everything went smooth with the install (at least I think). My problem is that when I get to the login screen, I click on my user name to type in my password but as soon as I click on either my user name or guest it basically freezes...Mouse still moves but can't do anything with login or the options on the bottom right of the screen...
Right when it freezes the pixels under the login box mess up, looks like some type of graphics problem?? I'm not sure, but I can't be the first person with this problem Also after it "freezes" I can't utilize the ctl+alt+f1 command either
I first noticed this problem when trying to play a first person shooter game. If I hold a key down such as "w" the mouse glitches and moves incredibly erratically when I try to look around. This happens outside of the games as well. What is the solution for this?I'd really like to be able to play an fps game.I have tried disabling compiz as well as turning off the "disable trackpad while typing" option as well.
View 2 Replies View RelatedI've been looking for an option to turn off for this, but haven't found any, and Google hasn't been helpful.When I switch windows with alt-tab, or a window requests focus, compiz warps my mouse cursor to that window. How do I make it stop?
View 1 Replies View RelatedI try to write a bash script that recognizes when the mouse moves.
like a screensaver.
But I want that while a browser window is opened and I move the mouse that a new webpage loads.
I can open opera with a console command but how can i recognize that the mouse moved?
So right after I installed 10.04 there seems to be some short of mouse/joystick mess. What I mean is that 2 types of joysticks (Saitek x52 and CH Products Yoke) seems to control the mouse as well! So when I pitch/roll the joysticks the mouse cursor also moves. When I move the middle lever of the CH products yoke, the mouse also moves horizontally. Also it is almost impossible to work with the scroll bars of windows as joysticks interacts with them via the cursor and issues botton clikcs scrolling the bars to the end! This looks to be a new issue on 10.04 as 9.10 had no such issue.
View 3 Replies View Relatedi had a bunch of documents opened and i saved one txt file. I then clicked it and dragged it to the recycle bin slowly but didnt release the button. Then the cursor just stayed like that. The cursor changed image while i was dragging it. It now remains as that image for the cursor. I can move it around but cannot click anything. If i press Alt Tab to switch to another window, it just highlights that file. I cant move about on the desktop either.
View 2 Replies View RelatedJust installed 11.2 on my Thinkpad T61 and during install the mouse pointer (synaptics) works fine but not the mouse buttons. After the install on every first login the pointer works but not the buttons. If I restart the gui and try to login into gnome again then all works agin. But it always fails on the first login and gnome sessions
View 3 Replies View RelatedI just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies View Relatedjust installed my first Linux operating system, openSUSE 11.2 on my laptop.Having trouble finding anything online on how to install a mouse for openSUSE 11.2.
View 4 Replies View Relatedsimilar issue to Keyboard and mouse deactivated while installing - openSUSE ForumsI am installing from OpenSuse Linux 11.2 DVD. After I hit install, the screen with keyboard layout choice comes up, but neither my mouse nor my keyboard work on that screen (they did work until that screen)I have Vista and Win7 installed on separate partitions. My keyboard is a logitech S520 and mouse LX5, both wireless, connected to a USB portI did try to connect a wired keyboard and mouse over USB (front ports), did not work.
View 9 Replies View RelatedI have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
View 7 Replies View RelatedI just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
The install was an update from OpenSuSE 11.1.
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
Installed OpenSUSE in VirtualBox to try out. Boots ok but can't capture mouse! I installed with all defaults and using Gnome. Host OS is Ubuntu. I'm running XP fine in VirtualBox and wanted to test drive OpenSUSE.
View 9 Replies View RelatedJust upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.
View 3 Replies View RelatedI recently upgrade my server pc from 11.2 to 11.3 via the net. Everything seems to go through ok. I restarted the PC and now i can not move the mouse or type anything at the login screen.
I can ping the pc fine and i can ssh into it, which tells me the pc is not froozen, just X is?
Today I installed openSUSE 11.3. I finished downloading updates, and restarted. I can get through the grub menu fine, but after that my keyboard and mouse fail to respond. On my windows partition(which is where I'm writing this) my keyboard and mouse work fine. If it matters, they are the Logitech Wireless EX100 keyboard and mouse set.
View 5 Replies View RelatedI am using openSUSE 11.3 in Compaq presario v3000. Its working fine. One morning I found that, my home folder is deleted from the desktop and my mouse right-button is not working on desktop. What can I do?
View 6 Replies View RelatedI've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies View Related