I want to create a compressed ISO image file and mount that file to one of the virtual drives and access the content (read-only) without worrying about manual decompression/extraction.For Windows and Linux (Ubuntu) OSes.
View 1 RepliesWhen trying to create a new compressed/archive file in Gnome Commander (GM) the file is created but the selected files are not added. I can open the new (empty) archive file and then add files to be compressed. I have tried using several different formats (zip, tar.bz and others) with the same results. The "file roller" is shown as a plugin but has no configuration other than the compressed file type.
View 2 Replies View RelatedOn a Linux CD/DVD, there are compressed filesystem images for the live version for KDE or Gnome for example, but they have no extension, but they are clearly an image file ( compressed filesystem images for the live version before installation ) !!
I was wondering, How do I mount these compressed filesystem images, after I copy the ISO content of the CD/DVD on my system .... I want to edit some files or packages and make some changes, like if I want to customize a live version of gnome for example ! ... ( I know you might be tempted to tell me to use KIWI etc to customize etc ..... ) ... but I want to be able to mount the compressed file system image, then edit it for reading and writing while it is in a subdirectory on its own ... i want to open it ! ... is there a way to do this ??? ... these type of files have no extension ...
i can open this compressed filesystem image then to edit for read & write ... before I roll it back again ..... If and when I succeed .... what should I watch out for ? ... will the same compressed file image but slightly modified work again ?
PS. that same question could be kind of translated or be extended like : how do I use unionfs/squashfs programs on the command line to mount these image files with no extension for read & write mode ???
I have problem to mount a compressed (ISZ) image under Linux, which was created by e.g. UltraISO? I am aware about user-space fuseiso, but it fails to mount these images, as I have reported in Debian bugtracker (correct me if I ddi something wrong). I ask the community for a help: I need a proved solution to mount these images without decompressing them.I believe that CONFIG_ZISOFS kernel option cannot help, as it refers a special RockRidge extension (per-file compression with mkisofs -z or mkzftree).
View 1 Replies View RelatedI've read all the documentation on installing Debian via CD, USB, or HD.I need to install Debian on a embedded system using only compact flash.This is similar to a HD installation, but I don't have any version of Linux installed to format.Is there someway of creating a bootable CF image from a Windows system?
View 3 Replies View RelatedI am going crazy with a gzip file. I can decompress the file in Windows using WinRAR but it is impossible on any UNIX operating system. the file seems to be ok. If I do file the_name_of_the_file.gz
I get: the_name_of_the_file.gz: gzip compressed data, from Unix, last modified: Sun Jan 30 14:10:21 2011
But if I do gunzip -f the_name_of_the_file.gz I alsways get: gzip: the_name_of_the_file.gz: unexpected end of file The same problem happens when I try to extract the file using the GUI tool in Ubuntu or MacOSX,
I'm trying to figure out how to access compressed files without uncompressing them beforehand, and also without modifying the application/script I am using. Named pipes do the trick, but only seem to work once
In one terminal I do this:
Code:
$ echo "This is a file I'd like to be able to read." >> my_file
$ gzip my_file
$ mkfifo my_named_pipe
$ ls
my_file.gz my_named_pipe
$ gunzip -c my_file.gz >> my_named_pipe
[Code]...
Can anyone recommend a file system similar to SquashFS but writable?
View 2 Replies View RelatedI just created a NTFS image file using the following steps:
After this i want to access the contents of this image file in windows. How to do that ?
Is it possible to boot from a disk image file(containing linux) file that resides inside windows and add a bootloader entry for booting from the disk image.?
View 2 Replies View Relatedi am using the following command to backup and sql file:
tar -zcvf "$BACKUP_DST/$FILE_NAME.tgz" "$BACKUP_DST/$FILE_NAME.sql"
i want to make sure the compressed file wont be larger then 300mb, if it exceeds 300mb, split it into several files.
I had read that the shred doesn't safely work for compressed filesystems when shredding a file, how this can be accomplished in a compressed fs ?
View 1 Replies View RelatedI have a hdd with WindowsXP that I'd like to install on Virtual boxe. The hdd is currently in use, but can put in enclosure to perform operation. To do the planned operation, what is the best way? Do I need make iso image of hdd? Or can I install directly to vboxe?
View 14 Replies View RelatedRight direction regarding the creation of a bootable Linux Image for PXE booting. I've already consulted google and the other obvious sources I could think of, but it seems that PXE is mostly used to install stuff, which isn't quite what I need.
The goal here is to have a pool of computers that boot from a central source so maintenance is less of a hassle. Installation of the individual PCs is not desired and I'm supposed to provide a functional Linux via PXE booting.
What I need is basically a way to turn a working Linux into an image that can be booted via network. Or to recreate that Linux as an image that I can boot.
I am new to the Linux world and I am not sure if what I am trying to do is achievable or not. I am trying to make an image of my existing drives running Linux on a USB and I want to use the same image off the USB to clone more bootable hard drives. Something like what Ghost does in windows. The problem is using 'dd' the image is too big ( I have 1tb drives ) and then I am not sure how to convert these images back on to new drives so that they boot in the OS as well. i am not sure if there is a utility that would let you do that?
View 2 Replies View RelatedI have what I thought was a simple task of creating ISO images of my Windows 7 system partion and boot partiton (the C drive) on my physical hard drive that I could use to load Windows 7 onto a virtual machine. Anyway, I'm running Ubuntu off the CD drive and I can see my drive partions (checked using the fdisk -l command). I have tried many iterations of the mkisofs command, but no matter what I do I get the error message: unable to open disk image file 'dev/sdb/win7sys.iso'. I don't understand why it's trying to open an ISO file it is supposed to be creating. The -o FILE option sets the output file name, so the message makes no sense to me. Below is an example of a simple and longer version with more options that I have tried to create an image of my sytem partiton (sda1) and save it on an external drive (sdb) with the file name: win7sys.iso (the next step I think would be to create or merge both partition images as one iso file for the VM). But I can't get past this error.
Can anybody tell me what I'm doing wrong?
sudo mkisofs -o dev/sdb/win7sys.iso /dev/sda1
sudo sudo mkisofs -input-charset iso8859-1 -V win7sys -o dev/sdb/win7sys.iso /dev/sda1
* Note that the output after the -o parameter is the desired destination /dev/sdb (my external drive) for the image file and /dev/sda1 is my Windows 7 system or boot partition (sda2 is what Windows sees as the C drive).
I have just finished installing (after hard work ) Centos 5.4 x86 configured with Snort & Snorby as frontend web, i would like to create from this installation kind of image that could fit to almost any hardware type.
View 2 Replies View RelatedAnyone know how to compress a file to extension z?not tar.gz , zip, 7zip
View 6 Replies View RelatedI am trying to upload some pics on my Facebook account using Firefox. When I click on Facebook's file upload icon, Firefox bring up a 'File Upload' window. I noticed that smaller image file is previewed on the lower right hand corner, while bigger image file is not. Is there anyway I can change this behavior or maybe change what Firefox is using to browse my files?
View 2 Replies View RelatedI have a problem, I'm trying to make my own LiveCD, but I can't mount compressed SquashFS file system. Here I give you my limited LiveCD version... If somebody would take a look [URL]
View 5 Replies View RelatedI would like to have my backup script that I am writing to create a sql dump of my database and go directly into a tar file. Does anyone know how I could do this with one command?
To be more clear I would like to go from
mysqldump -u xxxx -pXXXXX tablename> currentbackup.sql
tar -czvf backup-XXXXXXXX.tgz currentbackup.sql
rm currentbackup.sql
To a single command somehow. Does anyone know how I could accomplish something like this?
I have been having a recurring problem backing up my filesystem with tar, using bzip2 compression. Once the file reached a size of 4Gb, an error message appeared saying that the file was too large (I closed the terminal so do not have the exact message. Is there a way to retrieve it?). I was under the impression that bzip2 can support pretty much any size of file. It's rather strange: I have backed up files of about 4.5Gb before without trouble.
At the same time, I have had this problem before, and it's definitely not a memory problem: I am backing up onto a 100G external hard drive.
That reminds me, in fact, (I hadn't thought of this) that one time I tried to move an archived backup of about 4.5Gb to an external (it may have been the same one) and it said that the file was too large. Could it be that there is a maximum size of file I can transfer to the external in one go? Before I forget, I have ubuntu Karmic and my bzip2 version is 1.0.5 (and tar 1.22, though maybe this is superfluous information?)
error message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....
I am attempting to be careful in case my system crashes, and although highly unlikely my first question is if there is a way to first compress my Linux Partitions. After running the diskutil command in OSX's Terminal, I basically end up with this poartition scheme:
Quote:
Macintosh HD = 130GB
disk0s3 = 1MB
disk0s4 = 30GB
Linux Swap = 1.3 GB
I am sure there is a way in the Terminal to first compress disk0s3, disk0s4, and Linux Swap, and then output the compressed partitions into my external Harddrive. I have already read some of the suggestions that only /HOME, /etc/fstab/, list of installed packages, /opt, and /var/cache/apt/archives/-where all installed packages are stored, is what I should backup. But, please correct me if I'm wrong. Wouldn't it take quite a while to install all those packages again in case of a system failure. Or would it just be easier to untar all of them in their directories once Linux has been reinstalled. The closest command I have found so far in being able to achieve this is:
Quote:
sudo tar cvf - files | (cd target_directory ; tar xpf -) The above code is very suitable for what I am looking for because it enables you to copy files into another location by using the tar command where you would create In my case the new location would be my external harddrive. My external harddrive already has its own Linux partition which I am able to mount in Linux and that Linux sees as free space.
I am trying to sort image files I've assembled for document production, and I need to be able to see the height and width of the images without having to open them one by one. Is there a way to view an image's physical size in the folder window?
View 1 Replies View RelatedIs there some way I can make an image from my machine. I want to copy it to a VM.
View 4 Replies View RelatedI have Debian / Ubuntu / Xubuntu. I'm trying to distribute and run a Python file with the least number of clicks for the end user. How do I create a PKG file for Mac OS X on Linux?
View 1 Replies View RelatedEverything in Linux is a file, right? And everything can be represented by a file? Is there some way I could create a block device file that represents (i.e., provides an interface to) this image file? If so, then I could use fdisk on the device file to split it into partitions, format the partitions, and then mount them as directories. I could create a file system within a file system, which would be fun.
View 2 Replies View Relatedwhat is the best configuration in httpd.conf to set up an intranet with Apache on Windows server?
View 1 Replies View RelatedI have two hard drives in my desktop. One HD has a working Ubuntu system-hence the ability to post here- and the other contains Windows XP Pro. When the XP drive crashed I was able to re-install an image I had saved using Acronis. Unfortunately the dual-boot option at startup is no longer available. I can only boot to Ubuntu. Not so bad really but there are some programs on Windows that I need to use. Is there any way, using Grub perhaps, that I can reconfigure an MBR to include the second hard drive and the Windows system?
View 1 Replies View Related