General :: Reading/writing Ext3 Partiton From XP?
May 9, 2010
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers.I've used help from the official site http://www.fs-driver.org/and this tutorial http://www.dedoimedo.com/computers/l...s-windows.html
It's a straithfoward proces so I dont understand what I did wrong.I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04Also the partition is mounted at /home, so I dont know if that makes any diferance.
View 3 Replies
ADVERTISEMENT
May 9, 2010
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers. [URL] It's a straithfoward proces so I dont understand what I did wrong. I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04 Also the partition is mounted at /home, so I dont know if that makes any difference.
View 1 Replies
View Related
Jan 25, 2011
user@user-laptop:~$ sudo dd if=sd_backup of=/dev/sdd bs=4M conv=noerror,sync
205520896 bytes (206 MB) copied, 28.564 s, 7.2 MB/s
247463936 bytes (247 MB) copied, 57.1285 s, 4.3 MB/s
260046848 bytes (260 MB) copied, 73.2388 s, 3.6 MB/s
289406976 bytes (289 MB) copied, 104.121 s, 2.8 MB/s
[Code]....
How come dd gets slower after copying this 8GB file? What can I do about it?
View 1 Replies
View Related
Apr 7, 2011
Am interested in using MT29F2G08AABWP NAND Flash memory for a new embedded design and I couldn�t find a clear specification regarding how reliable is the NAND flash vs. NOR for reading operation.If I program successfully a NAND block, read back and verify successfully the information and never erase or program that particular block again, can I assume that block will remain a good block and the information written there is safe for READING, roughly as safe as a NOR sector?
View 1 Replies
View Related
Feb 9, 2010
I've been able to get access to our Netgear NAS, I can browse it, copy files etc. just fine. But I don't have "direct access" in as far as, Open Office won't open any files residing on the NAS, neither can I save directly to the NAS form a program and when I get a "Browse for File" form field on a website (eg attachments in GMail etc.), I can't browse to the NAS either. My XP box does do all of this, either through my mapped network drive or even through browsing the network. How can I make openSuse 11.2 use the NAS with my login credentials as if it was a local disk?
View 4 Replies
View Related
Jul 25, 2010
My main workstation incorporates a mixture of ext3, ext4, and NTFS partitions scattered across a number of hard drives. Several of the ext4 partitions are encrypted, and I intend to encrypt the rest of the Linux partitions in the near future.I run VMware workstation, with several Windows OS guests, including Win2K, WinXP and Win7. My Win7 VM is installed on a virtual hard disk, and that virtual hard disk is encrypted using VMware facilities.So this leaves me with a bunch of NTFS partitions that are not encrypted. These are physical partitions on a couple of different hard drives. The reason I have them is ancient and historical, and as I have upgraded my system over time I have maintained the architecture due to the extreme difficulty of rearranging Windows systems.I still need to maintain Win2K and WinXP support, and rearranging those virtual machines would represent a hideous nightmare for me; I really want to maintain the same hard drive partition architecture.But I want to encrypt the NTFS partitions, in a fashion that can be handled by any of the Windows operating systems, AND can be accessed for read and write from Linux.Is this possible? If not using Windows facilities (I don't think ntfs-3g handles encryption, and there are known backdoors in the Windows facilities anyway), is there any third party solution that would work? Would True Crypt do the job in a fashion that would permit access from all the various operating systems, as required? I do generally mount the NTFS partitions in whichever Windows VM is appropriate, then share them out via SMB, but there are circumstances (like when a VM is not running) where I will directly hit them from Linux. So, it is possible for me to contemplate a solution that only works from Windows, but this would cost me the ability to repair/modify those filesystems directly from Linux, which under certain circumstances (a malfunction of the VM, for instance) could be a problem.
View 2 Replies
View Related
Dec 5, 2008
I am about to write a program to listen and read data from /dev/ttyS0 and write the data to /dev/ttyS1 after processing. Also, the same time I need to listen to /dev/ttyS1 and write to /dev/ttyS0 if any data arrived at /dev/ttyS1.
View 9 Replies
View Related
Jan 1, 2011
Reading and writing text files in C?
View 9 Replies
View Related
Dec 3, 2010
I would like to write a program that can read every ethernet frame arriving on a specific hardware NIC, without a TCP/IP stack otherwise doing anything on that NIC. Likewise I want to be able to write out to that NIC. So every arriving ethernet frame, of all types, would be readable (probably one at a time to preserve frame boundaries). And every write of exactly that same data would send frames out. The data read and written would be the whole ethernet frame. The kernel would do nothing else with this data, but other NICs would still operate as usual.
What I would be doing is that on 2 separate NICs, copying frames from one to the other, as in bridging. But I would also be doing modifications per what my program needs to do (not at liberty to say what that would be). What facility would I need to be looking at to do this? There is no ethernet device file. Would raw sockets be able to do this? The programming language will be C.
View 4 Replies
View Related
Jan 18, 2011
I just want to read and write some values (integer) to my driver. I used put/get user but always getting errors.
driver
Quote:
int Wert;
static int device_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsinged long arg)
int ret;
[code]...
Quote:
int WERT
ret=ioctl(fd, SETIT, WERT)
ret=ioctl(fd, GETIT, WERT)
if i say in C++ WERT is 5 the value arg of the driver becomes 5 but not WERT the returnvalue of get and put user is -1 so it failed.
View 12 Replies
View Related
Apr 3, 2010
I want to be able to access my email account from the console. I'm reading all day about fetchmail, postfix, sendmail etc. but all the stuff I found is related to building whole mail system. All I want to do is to read my emails and write some. Which is the painless way to do this? I successfully configured Evolution for this purpose but I want to do that from the console.
View 10 Replies
View Related
Dec 2, 2010
I am trying to read a file character wise and trying to write the same character to another file. In this process, I unable to read and write white spaces successfully to the new file. The script reads the white spaces but while writing the white space is lost. The section of the code, is given below. Please advice how can i read and retain the white space while writing to a new file.
Code:
if [ -s f_test.txt ] && [ -f f_test.txt ]; then
echo "File Exists !!"
while read -n1 char; do
[code]....
View 2 Replies
View Related
Apr 2, 2010
At times I see heavy hard-disk activity slowing down system.I have enough RAM and enough of it free.Apparently I am not doing anything that should cause this.'vmstat' shows high numbers for "bi bo" I want to find out which processes are doing "bi bo".How can I zero in on the particular processes?What command?
View 3 Replies
View Related
Jun 20, 2010
There is the Archive::Zip I think I can use with Perl 5.10 but I don't know how. I don't want to read or write any files, just zip something in memory, with best compression, like
$text = "this is a test";
$zippedtext = &Zip($text);
sub Zip {
[code]...
I guess it's only a few lines.
View 3 Replies
View Related
Nov 4, 2010
It it safe to read a shared integer while another thread is writing to it on a multicore system?
View 3 Replies
View Related
Mar 11, 2010
Here the description of the issue I am having.I am writing a bash test script which reads lines from a file, builds ISO messages, sends them to a server, reads the response with response code and reports the result of the test to a file or on the screen.The message that I need to send is 94 characters long.Here's the portion of a code that I initially wrote:
~ Open socket.
exec 3<>/dev/tcp/172.26.0.25/9991
#~ Send msg.
[code]...
View 7 Replies
View Related
Mar 18, 2010
Samba seems to crash and come back after some seconds if I copy a lot of small files in a short period of time over the network. How do I fix it?
I have Ubuntu 9.10 Server 64bit running on a D945GCLF2 board sharing two 1TB ext4 formatted HDDs to my Windows PCs using samba. I've been having an issue with reading or writing files through samba. It happens during copying operations or checksumming, anything that reads or writes MANY small files in a small amount of time. I am pretty sure the problem has to do with my server because the server has run on two different LANs in different homes and will crash from activity with any of several other PCs. There is no crashing if I access the files through SSH, although when I do that the max transfer speed is less than 1MB/s.
When I induce the crashing, there is absolutely no output to the server terminal.
As an easy access example of something that will crash samba, extracting Cinebench R11.5 to the server will do the job. It always fails.
View 9 Replies
View Related
Sep 27, 2010
Whenever I am busy reading or writing large files, or large sum of files, my computer is unresponsive. Screens are getting greyed-out and I just can sit there and wait until the reading/writing is done.
This is not caused by the CPU which is overstressed because it is not. Look at the attachments and you will see the CPU is used for about 20%. When these pictures were captured the computer was using hellanzb to unrar a long list of rar-files.
When you look at my signature you see the computer is not bad at all, just disk-access is slow. I can transfer files with a maximum speed of 30MB/s. Is that normal or is it very slow? I don't know the numbers. I have 2 SATA disks.
O.S. is Mint 9-Isadora, based on Ubuntu 10.04 and I use the 64-bits version.
View 9 Replies
View Related
Dec 2, 2008
I synthesized a seismogram by using Fortran codes, I need plot the synthesized seismogram and the data together, so I can verify the accuracy of code. Now I encounter a question: how to read the SAC data by Fortran code, I have searched some codes on Internet, the details as follow:the velr12a.sac is my data file.
Code:
c read sac file
PROGRAM RSAC
PARAMETER (MAX=1000)
DIMENSION YARRAY(MAX)
CHARACTER*10 KNAME
[Code]....
View 2 Replies
View Related
Jul 9, 2011
On a Linux CD/DVD, there are compressed filesystem images for the live version for KDE or Gnome for example, but they have no extension, but they are clearly an image file ( compressed filesystem images for the live version before installation ) !!
I was wondering, How do I mount these compressed filesystem images, after I copy the ISO content of the CD/DVD on my system .... I want to edit some files or packages and make some changes, like if I want to customize a live version of gnome for example ! ... ( I know you might be tempted to tell me to use KIWI etc to customize etc ..... ) ... but I want to be able to mount the compressed file system image, then edit it for reading and writing while it is in a subdirectory on its own ... i want to open it ! ... is there a way to do this ??? ... these type of files have no extension ...
i can open this compressed filesystem image then to edit for read & write ... before I roll it back again ..... If and when I succeed .... what should I watch out for ? ... will the same compressed file image but slightly modified work again ?
PS. that same question could be kind of translated or be extended like : how do I use unionfs/squashfs programs on the command line to mount these image files with no extension for read & write mode ???
View 9 Replies
View Related
Oct 18, 2010
I have a HDD that has 2 partitions. the 2nd partition is the VG and I want to reduce its size. I have reduced the Largest LV in the VG and now have free space in the VG. But, I am clueless on how to proceed to reduce the partiton size so that I can use it for another need.
When done, I expect to have 3 parttions total on the HDD. But first, I could some help in understanding the steps necessary for me to take, to move the free space out of the partition that has the Volume Group. Then, i can use fdisk on that 3rd partition for my needs.
I already know how to expand a Volume group by adding PVs, but, I do NOT know and cannot find how to reduce it to recover the free space in the VG to be used in a new partiton. (Better explained..."I want to reduce the physical partition size that the VG represents.)
View 5 Replies
View Related
Sep 9, 2010
how do I mount a SafeBoot encrypted Windows partition on Ubuntu (10.04)?I have tried all thesemount -t ntfs /dev/sda1 /mnt/windowstried changing fstabtried changing grub.cfgI also installed ntfs config tool but it doesn't detect the windows partitionbut sudo fdisk -l show me the windows partition on /dev/sda1
View 2 Replies
View Related
Nov 29, 2010
I have a text file (myfile.txt) with columns a,b,c.
123 2 23
124 2 24
125 2 22
[code]...
View 4 Replies
View Related
May 4, 2011
I don't understand the results of a simple performance test I ran using two basic scripts (running on a high end server):
perfVar.zsh :
#!/bin/zsh -f
MYVAR=`cat $1`
for i in {1..10}
[code]...
Performance test result:
> time ./perfVar.zsh BigTextFile > /dev/null
./perfVar.zsh FE > /dev/null 6.86s user 0.32s system 100% cpu 7.177 total
> time ./perfCat.zsh BigTextFile > /dev/null
./perfCat.zsh FE > /dev/null 0.01s user 0.10s system 91% cpu 0.118 total
I would have thought that accessing a VARIABLE was way faster than reading a FILE on the file system... Why this result ?Is there a way to optimize the perfCat.zsh script by reducing the number of accesses to the file system ?
View 3 Replies
View Related
May 20, 2011
I Tarred and GZipped most of the data on one 1Tb partition and stuck the archives on a second 1Tb partition on a separate disk. I then proceeded to format the first partition with NTFS (from Linux.) The only problem is that I completely forgot that I had a CD drive and formatted sdc1 instead of sdd1! I began doing a full NTFS format and after a minute or two I cancelled it and decided to do a quick format. I then realized my mistake. I managed to find a copy of the superblock and began trying to recover the disk. fsck -t ext3 recognized the partition as NTFS but I luckily didn't have fsck.ntfs installed so it didn't touch it. I managed to get it working with fsck.ext3 (with -b,-B and -y) fsck.ext3 didn't mind that it was an NTFS partition.
Roughly how long will this take? It's running from Knoppix within a virtual machine to a USB hard drive which is 100% full. Days? Being that for a few minutes I attempted a full format am I going to end up with a bunch of corrupted archives? If I do end up with file corruption can anyone recommend a way of recovering the data / sorting it out? Is it likely to be just a few old files that are corrupt (It's my understanding that filesystems like to keep files in the same area on the disk to minimize the amount of head travel.) This might just be wishful thinking but as the filesystem fills up will ext3 put the newer files towards the end of the disk? If so then I'm hoping that a full NTFS format starts at the beginning of the disk.
View 6 Replies
View Related
Jul 23, 2010
i ve run into problems while installing 11.3 x64. Installer stops at search for linux partitions... to solve it i ve had to go back to 11.2. Anyway, i have installed 11.3 on another hdd (3hdds in raid 5 had to be disconnected). When i go into partitoner (11.3) and device graph, i see two of three raid hdds ok with sda1, sda2.... but the third one is without any partitions./ if i do the same in 11.2 all three hdds are with all partitions in that graph. Anyone know the solution except not installing 11.3? .)
View 2 Replies
View Related
Jan 11, 2010
I've been running a Suse 11.2 and ubuntu 9.04 on an internal HDD in separate partitions for about 6 months on an Acer aspire with 756 meg ram. I installed Suse first then Ubuntu as I couldn't work out how to alter the partitions and keep Ubuntu when installing Suse first. Yesterday when I tried to boot Suse I got the message Error 15 no file found. I went into boot edit for and Suse this is what I found.
Root (HD0.0)
Kernel /boot/vmlinuz-2.6.31.5-0.1-default root=/dev/disk/by-id/ata-s
nitrd /boot/initro.2.6.31.5-0.1-default
Id like to be able to fix this so I don't lose either OS as I use them both for different things and until I learn all about Suse and can make a live cd of OS, I really love it but am not prepared to dump ubuntu. I've put a lot of time into both and don't want to start again. I've got a Suse studio account and really want to create my own dedicated Video/audio KDE Suse. I'm new to dealing with grub and the terminal other than cut and paste, so may be a bit dim until I can understand them.
View 9 Replies
View Related
May 20, 2010
i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
View 9 Replies
View Related
Mar 25, 2010
My VPN is behaving funny sometimes, and I have to restart it often.I wanted to write a script which does that for me.It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes.If it finds a running vpnc process, it will kill it. Then it will start vpnc.I've written bash scripts of similar complexity,but now I don't have a bash,only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often.So I have some questions.
Is writing ash scripts different than writing bash scripts?
Is there something specific to consider when doing it?
When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash?
Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?
View 2 Replies
View Related
Mar 3, 2011
i am having a the following line in a file
<property name="connection.password"></property>
i have to give password in this line, like this
<property name="connection.password">XXXXXX</property>
Is this possible to acheive this using sed command
Beause i have to do this for n number files. so if i have option in sed for this the i will be doing this using script.
View 7 Replies
View Related
