I think opensuse should provide regenerated ISO files to public after several package updated. I think this may help reduce duplicate bug reports and reduce net traffics. I think this can greatly increase the user experience of opensuse.
View 5 RepliesI have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code:
Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
When i update package sax2-tools to version 8.1-618.1, from Xorg repository 11.2, it autimatically offers to delete the following packages:
sax2
sax2-gui
sax2-ident
sax2-libsax
sax2-libsax-perl
Dont know if this is a wanted behaviour.
how certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?
View 3 Replies View RelatedI want to get a list of all packages that provide a certain virtual package. A way of doing this would be to write a shell script that parses all output of Code: apt-cache search -f .* And spits out all packages that have the virtual package in the provides section. The problem with this approach is that it takes an awful long amount of time to execute. I guess that there should be a simple command that does this in an efficient manner, but which I wasn't able to find.
View 1 Replies View RelatedI have the 5 Debian 5.02 DVD/ISOs, and would like to set up a local server from which to perform installations using a PXE bootloader and the local LAN. Any pointers to how I might accomplish this? All of the online resources I've found for network-based installs expect to do all downloading from a remote mirror, and I would prefer to limit my network traffic to the local LAN. Also, I want to install to multiple new hosts, and would like to avoid doing a lot of babysitting and swapping DVDs in and out of the drives (and some hosts are without DVD readers).
View 12 Replies View RelatedToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
I have an application here that has some incompatibilities with java 1.6.0_11 and for this reason I must use java 1.6.0_7.The problem is that everyday the update applet shows me a message telling to update this package.Is there a way to disable the update of this package without removing OpenSUSE Update Repository?
View 6 Replies View RelatedDo I have to update the package manager that comes with OpenSuse before I get all packages?For whatever reason using the live cd I can't find any of apps I am looking for but on packman.org I can find all of them.
View 3 Replies View RelatedI'm on OpenSuSE 11.1, and since I needed some features of Firefox 3.5.x I manually updated via 1-Click intall to 3.5.8. Now the Updater-Applet signals a security repo update for FF 3.0.18 which is no longer installed since replaced by the 3.5.8, and I see no way to get rid of the red warning sign; this is very bad since now I get no longer informed about other new updates to really installed packages ....
View 9 Replies View RelatedMy question is: How to skip the installation of a package when using yum update from the command line? i.e., How would one update a system from command line and skip/not update kernel?
View 4 Replies View RelatedI've been trying to install xine & some other useful applications on F13, but yum keeps giving me errors of not being able to open package kit or something. Also having issues installing Mplayer all package for patching useful multimedia codecs for amarok, totem and rythmbox players.
View 1 Replies View Relatedwhen I perform an apt-get update and then attempt to install the package cifs.utils it says that it cannot find the package but in Ubuntu 10.04 it does find it in 10.10. Does this package have another name or is it that the standard repositories to not have it in there list?
View 4 Replies View RelatedI am using Fedora Core 4. While trying to install a package or update yum repository I get the following error
# yum update Setting up Update Process Setting up repositories Cannot open/read repomd.xml file for repository: legacy-base failure: repodata/repomd.xml from legacy-base: [Errno 256] No more mirrors to try.
tried to search the web but couldn't find any working solution.
Since applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies View RelatedWas wondering if someone could suggest a reference and possible approach to troubleshooting openSUSE update. I'd always assumed that the openSUSE update (applet) would notify me and update any apps installed from any of the configured repositories.This week I found two applications were not detected and updated, one from the Pacman repository where an update was available for more than 2 weeks and another from the Contrib repository where an update was available for an unknown amount of time.I manually detected and updated both using zypper without any special repository configuration.The SUSE updater has been running regularly installing critical and recommended patches regularly without issue.Am considering
- Maybe somewhere there is a config specifying repositories and/or apps? I can't seem to find something that's applicable.
- Maybe I misunderstood that the SUSE updater isn't supposed to update anything from non-OSS repositories?
I'm getting the following error every time i run the package manager to install or update etc..
Code:
E: nxserver: subprocess installed post-installation script returned error exit status 1
Despite the error, apt still works and allows me to install/remove apps.
The application in question also works fine too.
I seem to have a send mail problem .the server is RHes3 i edited the etc/mail/mail.mc
then did
[root@Mixer mail]# make -C /etc/mail
make: Entering directory `/etc/mail'
WARNING: 'sendmail.mc' is modified. Please install package sendmail-cf to update your configuration.
WARNING: 'submit.mc' is modified. Please install package sendmail-cf to update your configuration.
make: Leaving directory `/etc/mail'
[Code]...
everytime I run "zypper up -t patch", I get the following:
Code:
Loading repository data...
Reading installed packages...
Resolving package dependencies...
[code]...
i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies View Relateda beginner to ubuntu, why is 64 bit marked not recommended, have amd64 dual core, thinking of trying wubi, would automatically provide 64 bit install version? which to use?
View 1 Replies View RelatedDebian 5.0
What package I need to install to provide sha1 and sha256 checker?
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
i cant update or install anything. i have started update manager and i got an error. then i tried to update through terminal and got this:
[code]...
way of fixing this?
Is it possible to provide DESTDIR option during make install process of jhbuild? Default it installs in location provided by prefix.
View 3 Replies View Relatedwhen I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
I wish openSUSE to supply a daemon, which uses the /dev/freefall to provide hard disk head crash protection. There is an example application in usr/src/linux/Documentation/hwmon/hpfall.c which might be used as a base for such a daemon and the needed modules (hp_accel and lis3lv02d) are present in kernel 2.6.31.
View 3 Replies View RelatedIm not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies View Relatedhaving had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...