Server :: Mapped Network Drive Requires Password After Logging Out?
Jun 14, 2010
I have a peer-to-peer network with 25 WinXP Pro computers. I have built a Linux (SuSE) server for the purpose of backing up My Documents, PST files and favourites. Each user has their own folder containing the sync'd files. Each folder is password protected. I have configured each users machine with a mapped 'S' drive, which is the sync'd data folder on the Linux computer. All of the computers seem to end up with a "disconnected network drive" status after either logging out for the day or after some time has elapsed. Some will connect with a double click but others prompt for a password. I have tried mapping the drive using the option "Connect using a different user name", which is fine until the user logs out and back in again. I use SyncToy as a scheduled task, but can't connect to these mapped drives automatically, so the sync process will not work unattended.
View 3 Replies
ADVERTISEMENT
Jan 29, 2009
I've tried Ubuntu, Arch, and most recently Fedora but the SUSE GNOME environment blows everything else away!
The only problem (so far) is that Network Manager requires you to enter your password every time you login to unlock the password keyring. I want to disable this.
I think some distros disable the prompt by using the login password to unlock the keyring, but I use auto-login (if that makes a difference).
View 4 Replies
View Related
Mar 26, 2010
create a profile settings and network drive can be mapped automatically when user login to the (like Domain and active user profile on windows environment) Ubuntu systems?
View 1 Replies
View Related
Nov 24, 2010
I want to give my users option of logging to the system. They should have posibillity for choosing option betweend logging to the system with their default password or one-time password OTPW. I installed OTPW in my Debian. Here is my /etc/pam.d/sshd file:
[Code]....
View 12 Replies
View Related
Jan 20, 2011
I have three 10Gb Fibre PCI ethernet cards and 2 onboard gigabit ports. The two gigabit ports always seem to be mapped to eth0 and eth1. I set the network configuration for eth2, eth3, and eth4 in the /etc/sysconfig/network-scripts/ifcfg-eth# files. Would the NIC in PCI slot 1 always be mapped to eth2, NIC in slot 2 mapped to eth3, and NIC in slot 3 always mapped to eth4?
View 1 Replies
View Related
Nov 8, 2010
I have a .rar in my Downloads, I want to unrar this file to my Music folder, but the .rar is encrypted and requires a password.
I've tried a few commands like this:
Code:
But it tells me no files to unrar.
View 3 Replies
View Related
Sep 9, 2010
I have successfully Kubuntu 10.04 running with Belking wireless USB adapter. There is only one issue.I use WPA2 key to access my home wifi and after being connected I was asked if kdewallet should remember the password. I clicked yes.Now evertime my computer starts after booting to Kubuntu I have to enter my kdewallet password in order Network Manager can retrieve password from kdewallet.
View 4 Replies
View Related
Nov 6, 2010
I use truecrypt to encrypt a file containing my sensitive data (credit card numbers, bank account info, etc).
When I mount my encrypted file through truecrypt, I enter the password for my file. That's OK - I want to keep it that way. But when it gets mounted as a file system, ubuntu also requires that I enter the 'su' password.
How do I get around this?
I run ubuntu 10.04 (Lucid)
View 4 Replies
View Related
Aug 18, 2010
I've been running 11.3 on a net book for several weeks and have not had this happen on that computer. On a different computer, which was upgraded from 11.2 to 11.3, now requires a root password to shut down the computer.
View 1 Replies
View Related
Apr 29, 2010
'm running openSUSE 11.2 with KDE 4.4.2.
Since i installed KDE 4.* Whenever I go to shutdown, I get the shutdown dialogue, I hit shutdown, it logs me off, shows some text on shutdown screen, and then opens up the GUI again, bringing up a small window, where It asks for the root password, in order to shutdown. If i don't give it the root password, it goes to the login screen.
I cannot, any way, command line, GUI, or anything, shutdown without providing a root password.
If I use the command shutdown now, as root, it logs me off and goes through an endless cycle of logging off, and then asking for root to shut down, and not shutting down (All on the CLI), and everytime i give it the password, it cancels shutdown and goes back to the prompt. I eventually have to pull the battery to kill it in that case..
I have tried chmoding the shutdown scripts to make it work, it doesn't.
View 2 Replies
View Related
Jan 11, 2010
I have been having a small problem since I upgraded from Jaunty to Karmic, whenever I shutdown or restart, root password is required due to multiple users being logged-in.
I have run ck-list-sessions, however I can not trace where (or what) session 5 is.
Code:
Since I have MythTV installed and there was a similar bug, I tried the following solution without any success: [url].
View 2 Replies
View Related
Mar 10, 2011
After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
View 1 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Aug 22, 2011
When booting from the Ubuntu 11.04 CD, it asks for user name and password to install. I downloaded the iso twice and did a checksum. Do I need a user name and password before installing? What is the user name and password? I read the documentation and cannot find any entry about user name and password needed when booting fron CD.
View 3 Replies
View Related
Aug 8, 2010
One of my machines running 10.04 recently began requiring the root password in order to carry out privileged operations in update-manager. I found this bug in launchpad. It's similar, but related to 10.10. If I create a root password, then I can use it to carry out privileged operations in update-manager, but I prefer not to add a root password just for this purpose.
View 5 Replies
View Related
Sep 28, 2010
I am trying to connect the one of server RHEL5.4 to the IBM iSCSI storage. Server is equipped with 2 single port Qlogic iSCSI HBA(TOE). RHEL detected the HBA and installed driver itself (qla3XXX). I have configured the HBA ip address in the range of iSCSI host port of storage. Both of the HBA is connecting to the two different controller of storage. I have discovered the storage using command iscsiadm -m discovery command for both of the controller and it went through fine. But problem is whenever server is restarting if both of the hba is connected to the storage then server will not detect the volumes which is mapped to the server and then to detect the volume I need to run "mppBusRescan" and "vgscan" command each time. If only one path is connected it is fine.
View 1 Replies
View Related
Aug 28, 2010
I have a second hard disk which has windows and C and D drives partitions. When I boot fedora 13, fedora automatically mounts them as 53 Gb Filessytem and 200 GB Filessytem. But when i try to browse to these filesystem, fedora ask me root password. How I can configure fedora so that it does not ask me root password and this change should be permanent ( surving computer shutdown and restart) ? I want these windows partitions to be reachable by me as the non-root user.Also given /dev/sdb (the windows disk) what is the command line to find out the filesytem path to which various paritions on /dev/sdb are mapped to?
View 2 Replies
View Related
Oct 15, 2010
I am running ubuntu 10.04 64 bit with Centos Directory Server centralizedauthentication tool. I can log in just fine with my ubuntu client, however when go to my Directory Server and tell it to require a password change on reset for any of my users, the ubuntu client doesn't require the user to reset their password. the reason I need this to work is so I can reset a users password from the Directory server and then have it use what I set it to for their next login attempt but then require them to set their own password. After days of searching I have only found out that it can be done by setting the option in Directory Server but Ubuntu 10.04 seems to just ignore the option. I am using the libnss-ldapd and libpam-ldapd packages on the Ubuntu client because the libnss-ldap and libpam-ldap didn't work at all, what am I missing?
View 1 Replies
View Related
Nov 15, 2010
command to show the luns mapped to redhat enterprise server 6.1 host. And how do i known the WWNN for the FC HBA attach to the host.
View 6 Replies
View Related
Feb 21, 2010
I am having some trouble logging into my machine: it seems to not accept my password. I am fairly sure I am typing it correctly. I can work around it easily enough by logging into the console and changing the password, but it is annoying.
View 6 Replies
View Related
Dec 17, 2010
I have a problem loging into SUSE 11 64 bit as well as 32 bit. While installing it doent ask me for the ID and password. I tried to install the OS twice...but again it doent asked me anything.
View 6 Replies
View Related
Jun 10, 2010
Any idea how to log a user in without a password in GDM? I've found this archived thread but it doesn't appear to do anything when I tried what it says: [URL] I'm not looking for auto-login. I'd simply like one user to be able to click on his name and it will log in without prompting for a password.
View 3 Replies
View Related
Aug 5, 2010
I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies
View Related
May 8, 2010
Got latest version of ubuntu, installed skype and i keep logging in it keeps saying incorrect pw. than i made a new account and tried that, still incorrect pw?
View 1 Replies
View Related
Jul 19, 2011
I've recently installed an internal optical drive (Blu-Ray RW: LG WH10LS30) into my dual boot system. The Windows partition had no trouble with this. However, ubuntu began taking ~30 extra seconds to boot. Once ubuntu finally gets running, the drive is not detected at all. dmesg showed the following:
Code:
$ sudo dmesg | grep -i 'ata2'
[ 1.430315] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
[ 2.777449] ata2.01: failed to resume link (SControl 0)
[ 2.933509] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.933521] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.933531] ata2.01: link offline, clearing class 3 to NONE
[Code]...
Further investigation revealed that changing my BIOS settings for SATA from IDE to AHCI fixed this problem entirely. The ubuntu partition boots fast again, the drive is working. Except, this causes the Windows partition to fail completely. I'm wondering, what is the best way to fix this? Hopefully without a complete reinstall. Is there a GRUB command that could apply AHCI to only the optical drive during ubuntu boot?
View 2 Replies
View Related
Jan 27, 2010
Since update yesterday to kde4.3.5 I notice this am - after logging in with password the loading desktop stalls. In cat /var/log/messages I grabbed part that seems possible.
Jan 28 03:17:39 SUSE11-2 SuSEfirewall2: Firewall rules successfully set
Jan 28 03:17:42 SUSE11-2 kernel: [ 70.264865] bootsplash: status on console 0 changed to on
[Code].....
View 1 Replies
View Related
Jun 2, 2011
I have installed the new phpMyadmin3.4.1 on a server running Ubuntu 9.10 with apache and mysql. It runs on php5.2.10The apache config seems fine as the virtual directory that I configured works fine. http://<ip-of-server>/phpmyadminlink works. The home page is displayed. But when I enter the user name and password, instead of logging into the console, it again redirects me to the index page of the site. There are no errors displayed. I have checked that cookies on browser are enabled.The server is hosted on amazon web services, if that makes any difference
View 7 Replies
View Related
Feb 27, 2010
new Install of 11.2 every time i boot i have to config network devices via Yast Control Center. I now have 8 eth configs for my one local net adapter. Why does the MAC address change each time? I cant use my routers built in MAC filter and MAC control functions if this keeps changing. So each time i boot i need to also go into my router and build a new MAC address profile based on the new MAC address before i get Internet access. Security to the point of no access...I hope this is just a bug in the system. I thought MAC addresses were firmware/device specific? What I need is one eth config that works each boot. And I need one MAC address that does not change between boots.
View 4 Replies
View Related
Jul 22, 2010
After reading this pdf on top 5 things to log for security, ive decided to attempt this for my webserver. how i might setup some logging systems to do these tasks. Basic things i need to be able to do: Record things like password attempts on htaccess files, from what IP address, and how many attempts there were. Any useful links anyone can think of to get me started? Im a student programmer at university so any programming i should be able to cope fine.
View 2 Replies
View Related
Dec 18, 2010
I have tried to not allow root access and have created a wheel user.
Now I can not logged in as root.
Its okay but when am logging as wheel user and trying to access root then it says:
Code:
View 14 Replies
View Related
