What are the hardware requirements of openSUSE 64 bit? Is it the same as 32 bit? In particular, I'm concerned with how much HD space I need to install the OS. The ISO for openSUSE x64 was 4.2 GB. Crazy!
View 9 Replies
i have a sony vaio desktop pentium 4 1.5ghz 128mb and i want to install ubuntu on it,iv tried ubuntu 10.04 but it doesnt meet the system requirements,i also tried ubuntu 8 but it says "this kernel requires an x86-64 CPU and i only have i1586CPU"
View 2 Replies View RelatedWhen installing COMPIZ on KDE 4.3.5 and Opensuse 11.2 64 bit, I get the following error message: "compiz-kde4-0.8.4-167.x86_64 requires compiz = 0.84, but this requirement cannot be fulfilled. Is there any way to resolve this issue, and is the problem missing repos?
View 3 Replies View RelatedI Was Just Wondering What The System Requierments for Ubuntu 10.10 are Because i am interested in installing it on a 500 MHz 256 MB Ram Gateway Pentium 3 Will it work?
View 2 Replies View RelatedI currently have 512 MB of ram and a 2.6 GHZ pentium processor and 40GB free on my hard disk, can I still install f13?
View 1 Replies View RelatedI have a Windows 98 computer I would like to run a linux distribution on. Note: It has 333Mhz and 64MB of RAM. Currently (using the KernelEx program), I can run the latest Firefox w/ latest Flash and use Microsoft Word 97 and Excel 97. Are there any options in the Linux world that can match what Windows 98 gives me with my system specs?
View 4 Replies View RelatedWhat are the system requirements for the CentOS 5 liveCD?
View 1 Replies View RelatedI have an older PC running Ubuntu 10.04, and the system is slow, especially with Firefox running. I recently upgraded to 2 gig memory, but it didn't help. I have plenty of space on my hard-drive, using only 30 gig of 80 gig. My CPU is Intel Celeron 2.40GHz. I have broadband, and the speed seems good. What are the system requirements for Ubuntu 10.04? Any tips for speeding performance, esp on Firefox? I used to do a defrag when I had Windows; is there any need to do that on Ubuntu also?
View 9 Replies View RelatedI have a 2010 model laptop running slackware 13.1, and after setting up a udev rule for my epson rx700 printer/scanner, this laptop can print to the rx700 without problems, and I can scan straight into gimp with xsane... I can even share the printer and scanner over my local lan.however when I pack up my laptop and hit the road, the other folks in the house cannot print or scan over the network anymore, so I tried to get an older desktop we have laying about to be the cups / sane server instead of my laptop.I tried a Dell Dimension 8300, and a Dell Optiplex GX 260. Both have USB 2.0 however, on fresh slackware 13.37 installs, even after the udev rule, neither old computer is successful finding the scanner with sane-find-scanner, although it is listed in output of lsusb.
does anyone know if there is a workaround on these older machines, or have there been some hardware changes in the last 8 years that the machines haven't undergone, and I should give up trying to get one to be cups/sane server for rx700..
I am wondering if you can play Runescape on Puppy Linux(Slackware) with Java, Flash, and the plug-ins are all installed, and i use a Live Usb. Is this possible? Recommended Requirements(and please don't write the bare minimum)
View 3 Replies View RelatedTrying to make sense of this Linux stuff, by trying to install Fedora 14. First impressions are it?s a parallel universe populated by those who hark back to the era of Windows 3.1 / DOS, and earlier, where command line instructions and messing around with .ini files was all the rage. Which might all be a great little hobby to go back to, being more 'at one, and intimate' with my machine and learning a new skill to take some pride in, but all it means so far is my patience is being really tested by needing to learn it all from scratch!
The installation guides seem to suggest that if your graphics card is not good enough then the installation will default to the text based one. Which is what happened in my case. I can get to the login prompt after the installation, but that's the point where it gets really frustrating in having my machine think it?s a mid 1980s Commodore 64 or something!! Never mind PEEK and POKE, I just want to THUMP or KICK it.
I read somewhere I should start X Start to start the GUI. Nope, x start or xstart doesn't do anything. I then read that only works if I had installed X Windows. Can't find where or how I install X Windows though! I then read, as I say, things default to purely text if your graphics card is not good enough, but then I can't find anything about what the minimum spec is. Seems odd that a card that can cope with Windows can't work with a system as basic as linux/fedora with its frustrating command line-intensive way of working.
- what the minimum graphics card spec is to enable GUI?
- how to install this X Windows thing?
I'm a new Linux user (Ubuntu), and i need a simplified explanation of how to install and configure OpenCA in order to test it and anderstand how it works.
View 3 Replies View RelatedI'm needing to stand up a Lamp server for a SugarCRM migration. I've been told I need to ensure php 5.2 on the box along with ensuring several mod's are installed as well for php and apache. I was planning on using the lamp provided from xampp (apache friends) but they're current build is using PHP 5.3, any suggestions on how to get around it? If I have to build the whole thing from several packages (apache, php, mysql) then no problem, but I really like the myphpadmin page that comes with the xampp installer.
View 2 Replies View RelatedI am testing release 10.10 of Ubuntu desktop from a USB boot drive. It looks great so far, and I am thinking of installing it on the machine. However, I would like to know the disk space requirements. I know I could look them up, Also, while working with the interface I accessed all of the machines devices from the Linux OS and saw that I could partition an existing partition. However, that houses the Windows XP SP3 installation and I was wondering if altering partition size would wipe its contents.
I would be awsome if I could dynamically alter the partition to the size required by Ubuntu plus some slack for applications and the like so I could have both OSs on the same machine without having to reformat the drive for dual boot and re-install both OSs.
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View Relatedwe have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am trying to install openSUSE 64 bit with KDE on my netbook and I am having some issues. I can't get the install started. I tried creating a live usb by using the SUSE Studio Image Writer, but I get an error saying: Exception caught during write: ystem.ComponentModel.Win32Exception: Access is deniedat ImageWriter.DriveAccess.Write(Byte[] buffer, UInt32 len)at ImageWriter.MainWindow.WriteToDisk()(This happens when I try to make the usb)I tried Googling it but I couldn't find anything so I tried creating a live usb using UNetbootin but when I boot from the usb, I get an error saying: Could not find kernel image: gfxboot.I have a 2 gb usb with FAT file format. Also I am only in High School, I want to try out different Linux distros so tell me if I did something wrong.
View 3 Replies View Relatedhow to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View RelatedI've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies View RelatedI just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies View RelatedI am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies View RelatedI had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
