OpenSUSE Install :: System Freeze After Install / What To Fix It?
Jun 8, 2010
I'm trying to perform a network install of OpenSUSE 11.2 on a Shuttle SN25P.
The machine has 2 hard disks installed with Windows 7 on one. I am trying to install OpenSUSE on the other.
The installation runs through as normal but the system freezes on the reboot, just after the message "Setting up service (localfs) network"
The screen goes blank apart from a solid cursor in the top left corner and the keyboard is totally non responsive
I have tried a few reinstalls but they all do the same
The Windows partition still boots OK from the Grub menu
I can't find any similar symptoms via a web search.
View 4 Replies
ADVERTISEMENT
Jun 9, 2010
I am a convert to OpenSUSE having recently ditched Windows. I really like the latest version of OpenSUSE but keep experiencing this annoying system freeze every 20 minutes or so. I get absolutely no response from the keyboard, although I do have the mouse working. However the end result is ALWAYS a cold boot
I am running SUSE on a spare machine as follows:
DELL Optiplex GX270 standard machine with integrated peripheral devices etc. Chipsets are all up to date and the hard drive is performing without fault. 1.25 Gb Ram
View 4 Replies
View Related
Jan 30, 2011
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
View 3 Replies
View Related
Jan 31, 2011
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
View 9 Replies
View Related
Feb 20, 2011
New PC, new OS win 7 and commercially created 11.3 freezes at install. Could it be ACPI.
View 9 Replies
View Related
Feb 23, 2010
I did an install of Opensuse 11.2 yesterday from the Gnome live-cd. Everything went fine, live-cd worked perfect, but after install It would load just the desktop wallpaper and my mouse cursor seemed to freeze. No panels, Icons or anything.
View 3 Replies
View Related
Feb 27, 2010
I installed OpenSUSE 11.1 on a friends computer after having a lot of trouble from ubuntu, and because I use it. It was working great when she got it home, but it locked up randomly and wouldn't unfreeze so she turned it off and when she rebooted She got an error about there not being a file system present and that she needed to run a mount command, which didn't work. After that, now it just says that there is no files system present and you ge tthe basic prompt. I had her run a live cd and run Gpartd and check and repair the partitions, but it did nothing.
View 3 Replies
View Related
Mar 29, 2011
There is an intermittent problem with resuming from s2ram. Occasionally, the power button is pressed to resume, the screensaver comes on but the animation is frozen along with the mouse and KB. Sometimes the desktop will show although with the same frozen condition. My swap parition is 2GB. I read in the forums that a small swap partition may cause a somewhat similar condition. I also read a recommendation to disable powersaving and screensaver, again not for my exact symptoms. I would like to find the root cause even if it takes some doing. Otherwise, the system rocks (except Amarok never worked but Kaffeine works for sound). Here are the system specs:
openSUSE 11.3 x86_64
KDE 4.4.4. rel 3
HP xw9400 Workstation AMD 64 Opteron
OCZ Vertex 60GB (dedicated system drive-single boot)
[code]....
View 9 Replies
View Related
Dec 5, 2010
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
View 9 Replies
View Related
Mar 12, 2011
I have a Tecra A7 with Intel 945GM. /boot is in a Ext4 partition and the rest is LVM2 splitten in 3 (/: Ext4, /home: Ext4 and swap). There is also a windows partition in the disk: I have installed openSUSE 11.4 (clean but keeping my /home directory untouched why is there since my openSUSE 11.2 installation). I have the following questions:
1.- During the installation I tried to shrink the windows partition and grow the LVM2 . The installer said that the partition was in use and could not be modified. I thought that during the installation the parititions where not mounted. Why is this? How can I grow now the physical volume (not the logical ones)?
2.- Solving this problem I realized that there a lot of duplicate files in .kde and .kde4. Can some of these be deleted?
3.- At boot, the computer frequently freezes after GRUB. Is right after selecting an option in GRUB, so it might be at mounting. In the failsafe configuration, it happens less frequently. How can I diagnose what is really going on?
4.- Every time I navigate into a webpage which contains a login form, Chrome ask me to unlock kdewallet. It is extremely annoying because this happens with all webpages, not just the ones in which I am registered.
View 1 Replies
View Related
Mar 22, 2011
I can't install 11.4. First install freeze when loading basic drivers. I set acpi=off and install start but freeze during setting.I think also that 11.4 was not mature.I have a Asus P7P55 MB with Intel Core i5 CPU 750 8Go RAM and Nvidia GT200 GPU.No problem with 11.2 except sound.
View 5 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Sep 7, 2011
I am trying to install openSUSE 64 bit with KDE on my netbook and I am having some issues. I can't get the install started. I tried creating a live usb by using the SUSE Studio Image Writer, but I get an error saying: Exception caught during write: ystem.ComponentModel.Win32Exception: Access is deniedat ImageWriter.DriveAccess.Write(Byte[] buffer, UInt32 len)at ImageWriter.MainWindow.WriteToDisk()(This happens when I try to make the usb)I tried Googling it but I couldn't find anything so I tried creating a live usb using UNetbootin but when I boot from the usb, I get an error saying: Could not find kernel image: gfxboot.I have a 2 gb usb with FAT file format. Also I am only in High School, I want to try out different Linux distros so tell me if I did something wrong.
View 3 Replies
View Related
Dec 13, 2009
how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies
View Related
Feb 16, 2010
I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies
View Related
Sep 16, 2010
I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies
View Related
Sep 27, 2010
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies
View Related
May 29, 2011
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
View 4 Replies
View Related
Jan 31, 2010
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
View 9 Replies
View Related
Sep 22, 2010
I'm newbie to opensuse. I want to install rdesktop to connect windows system from opensuse linux system. I have downloaded rdesktop rpm from net and installed with YAST. Error occured, the error states that "rdesktop cannot be install due to missing dependency". Now what to do to install rdesktop.? Is there any way other than rdesktop to connect windows system from opensuse?
View 9 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
Mar 15, 2011
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
View 8 Replies
View Related
Apr 4, 2010
Iv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies
View Related
Jan 21, 2010
I was trying to upgrade to 11.2 from 11.1 by upgrading the OS online. However my internet connection failed and the upgrade has now messed up my system. I have a dual-boot system with Windows XP and I'm wondering if it would be OK in getting the DVD and selecting update? Or do I have to change the boot log etc?
View 6 Replies
View Related
Feb 8, 2011
I tried to use systemtap but it complains about:
Code:
semantic error: missing x86_64 kernel/module debuginfo under '/lib/modules/2.6.34.7-0.7-desktop/build'...
[code]....
View 6 Replies
View Related
Sep 25, 2010
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
View 4 Replies
View Related
Jul 19, 2010
I've just installed OpenSuse 11.3 on my two Sony Vaio VPCF11Z1E machines (which have a Geforce GT 330M graphics card).Both machines appear to setup correctly and behave normally, but at seemingly random intervals (of the order of magnitude of 15-30 minutes) the whole system locks up for no readily apparent reason. I can still move the mouse pointer around the screen, but I cannot click on anything, and the whole keyboard is unresponsive (including any reasonable ctrl-alt-xxx which might normally help). The only way to get out of this seems to be to press and hold the power button to shut the whole machine off (which is not ideal!)
View 9 Replies
View Related
Jan 4, 2010
After last kernel update (2.6.31.8) when I try to connect to access-point my system freeze.
I use realtek network card (rt2860sta module).
View 9 Replies
View Related
Jul 13, 2011
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
View 9 Replies
View Related
