I am a convert to OpenSUSE having recently ditched Windows. I really like the latest version of OpenSUSE but keep experiencing this annoying system freeze every 20 minutes or so. I get absolutely no response from the keyboard, although I do have the mouse working. However the end result is ALWAYS a cold boot
I am running SUSE on a spare machine as follows:
DELL Optiplex GX270 standard machine with integrated peripheral devices etc. Chipsets are all up to date and the hard drive is performing without fault. 1.25 Gb Ram
I'm trying to perform a network install of OpenSUSE 11.2 on a Shuttle SN25P. The machine has 2 hard disks installed with Windows 7 on one. I am trying to install OpenSUSE on the other.
The installation runs through as normal but the system freezes on the reboot, just after the message "Setting up service (localfs) network"
The screen goes blank apart from a solid cursor in the top left corner and the keyboard is totally non responsive
I have tried a few reinstalls but they all do the same
The Windows partition still boots OK from the Grub menu
I can't find any similar symptoms via a web search.
I have never had this problem before but when i boot the system hangs for about 2 mins when brining up my harddrive I am using scsi disk support and the newer ATA driver for my Harddrive (the same as ive always used but for some reason the system just hangs for like 2 mins then boots normally
this is somthing that urks me and i know im missing somthing the platform is a hp nc8230 notebook please request any information or how to provide it as i am new to linux (kinda) but for the life of me i can't figure this one out
I can get connected to the Internet when I reboot the system, but the connection usually fails after within 10 mins. However, even then the network manager says it's connected. Never reconnect, manually or automatically.
I've just installed OpenSuse 11.3 on my two Sony Vaio VPCF11Z1E machines (which have a Geforce GT 330M graphics card).Both machines appear to setup correctly and behave normally, but at seemingly random intervals (of the order of magnitude of 15-30 minutes) the whole system locks up for no readily apparent reason. I can still move the mouse pointer around the screen, but I cannot click on anything, and the whole keyboard is unresponsive (including any reasonable ctrl-alt-xxx which might normally help). The only way to get out of this seems to be to press and hold the power button to shut the whole machine off (which is not ideal!)
I have a big problem with my openSUSE 11.2 32bit (but I have experimented the same error with other distributions), this problem consist in a temporarily freeze of my system after some seconds or some minutes if I don't move the mouse or I don't press any key... but when I move the mouse or press any key the system magically wake up and each applications begins to run from the point where was interrupted... this problem also affect on the system clock that loses every second that the system remain frozenMy computer is a notebook with: CPU Intel Core2 Duo T81004GB RAMGPU GeForce 8600M GT
After a bit of work I got 3d acceleration (direct rendering) working on my system. Now, whenever I use intensive graphics, (certain screen savers, Google Earth overlay animations) all performs fine for a while (1-2 minutes) and then causes a full system freeze. Only solution at that point is a hard power reboot. I don't know where to look for a solution, since I can not check any diagnostic files when the system is frozen.
System: Intel Pentium 4 CPU 3.00GHz ATI FireGL V3100 graphics Card OpenSuse 11.4 with radeon driver.
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
I did an install of Opensuse 11.2 yesterday from the Gnome live-cd. Everything went fine, live-cd worked perfect, but after install It would load just the desktop wallpaper and my mouse cursor seemed to freeze. No panels, Icons or anything.
I installed OpenSUSE 11.1 on a friends computer after having a lot of trouble from ubuntu, and because I use it. It was working great when she got it home, but it locked up randomly and wouldn't unfreeze so she turned it off and when she rebooted She got an error about there not being a file system present and that she needed to run a mount command, which didn't work. After that, now it just says that there is no files system present and you ge tthe basic prompt. I had her run a live cd and run Gpartd and check and repair the partitions, but it did nothing.
There is an intermittent problem with resuming from s2ram. Occasionally, the power button is pressed to resume, the screensaver comes on but the animation is frozen along with the mouse and KB. Sometimes the desktop will show although with the same frozen condition. My swap parition is 2GB. I read in the forums that a small swap partition may cause a somewhat similar condition. I also read a recommendation to disable powersaving and screensaver, again not for my exact symptoms. I would like to find the root cause even if it takes some doing. Otherwise, the system rocks (except Amarok never worked but Kaffeine works for sound). Here are the system specs:
openSUSE 11.3 x86_64 KDE 4.4.4. rel 3 HP xw9400 Workstation AMD 64 Opteron OCZ Vertex 60GB (dedicated system drive-single boot)
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
I have a Tecra A7 with Intel 945GM. /boot is in a Ext4 partition and the rest is LVM2 splitten in 3 (/: Ext4, /home: Ext4 and swap). There is also a windows partition in the disk: I have installed openSUSE 11.4 (clean but keeping my /home directory untouched why is there since my openSUSE 11.2 installation). I have the following questions:
1.- During the installation I tried to shrink the windows partition and grow the LVM2 . The installer said that the partition was in use and could not be modified. I thought that during the installation the parititions where not mounted. Why is this? How can I grow now the physical volume (not the logical ones)?
2.- Solving this problem I realized that there a lot of duplicate files in .kde and .kde4. Can some of these be deleted?
3.- At boot, the computer frequently freezes after GRUB. Is right after selecting an option in GRUB, so it might be at mounting. In the failsafe configuration, it happens less frequently. How can I diagnose what is really going on?
4.- Every time I navigate into a webpage which contains a login form, Chrome ask me to unlock kdewallet. It is extremely annoying because this happens with all webpages, not just the ones in which I am registered.
I can't install 11.4. First install freeze when loading basic drivers. I set acpi=off and install start but freeze during setting.I think also that 11.4 was not mature.I have a Asus P7P55 MB with Intel Core i5 CPU 750 8Go RAM and Nvidia GT200 GPU.No problem with 11.2 except sound.
I've been getting some system freezes when running blender on a new system (using about 1/2 my 8GB memory, AMD Phenom II x6 1090T+default AMD CPU cooler, ECS A880LM-M motherboard, Corsair 1333 DDR3, 2x4GB). PS voltages (measured off MOLEX plug) 12.05VDC and 5.2VDC. Tried BIOS resetting defaults. I'm trying to narrow down the problem with the MEMTEST v4.0. It gets through all tests fine until test #7 (block move) and starts throwing a ton of errors, and about 2/3 of the way through that test it says "unexpected interrupt, halting CPU0." All the listings say "28dbbd11" (this varies from run to run, except the 'Stack:' listing seems to count up from that number). I've tried unplugging one memory module and then swapping them as well as their positions. Same result always: block moves throw errors, followed by halting CPU0. To me this suggests the motherboard or the Phenom II. But I don't know how to test these. Can someone give the next step in diagnosis? I did find this link, but I'm not sure how it differentiates between my error and something specific to either the MOBO or CPU:
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e Nividea G7600 graphic card Former system installed and running flawlessly: 11.1
I'm running ubuntu 10.04 as a mythtv box and it works mostly fine. But occasionally the system will hang during booting and the last messages I can see are code...
So, I don't know. What is the problem? This system is supposed to run mostly unattended, I can't check all the time whether it booted alright.
I'm experiencing some weird short freezing issues in Squeeze and / or unstable. Everything works as usual, then the system will freeze for some seconds if I don't do anything, or resume faster if I move the mouse or hit a key on the keyboard. I thought it was a wifi related problem, as I have an intel iwl4965 , here is what I often see in dmesg: [ 2608.910307] iwl4965 0000:06:00.0: Queue 4 stuck for 2000 ms. [ 2608.910317] iwl4965 0000:06:00.0: On demand firmware reload [ 2608.912832] ieee80211 phy0: Hardware restart was requested
i'm running debian on a custom-built (no brand) box, which has been up and running for, maybe, 3-4 years with no issues whatsoever. all good parts... asus mbo, athlon, wd hd, etc. lately, every once in a while - like, say, every couple of days - i hear a "beep" from the box and the system freezes... lose the keyboard and mouse, and the display stays up but also freezes (for example, if a videos vid was playing, it would just freeze). have to physically reboot to get the system back. i assume this has nothing to do with the os or any app (although i'm usually browsing with chrome or ff when it happens). not being a hardware guy... can anybody clue me in as to how to figure out what's causing the problem?
i've got a non-typical problem here. i've got kvm-ed freebsd (its not so important here) stored on a block device - /dev/sdb8. i wanted to install fedora rawhide there but first i thought it's a good idea to do some backup. so here we go dd if=/dev/sdb8 of=freebsd.img bs=4k
theoretically, dd should do the thing without saying a word, but it doesn't. every time it stops after reaching 16GB filesize (partition is about 35GB) and completely locks the system (only reset helps).the dump worked only once, but when i tried to compress this big image 7z got stucked too and the system froze . the problem occurs when copying to the same drive or to different drive. i've got a partial kerneloops logs, but so far i haven't found the answer.
Code: Kernel failure message 1: BUG: Bad page state in process bash pfn:14a224 page:ffffe200048377e0 flags:0040000000000000 count:0 mapcount:0 mapping:0000000000000002 index:2a4b (Tainted: P ) Pid: 9711, comm: bash Tainted: P 2.6.29.5-191.fc11.x86_64 #1 Call Trace: [<ffffffff810a2be0>] bad_page+0x11d/0x130 [Code]....
Well i just installed ubuntu and its amazing but after playing around a little i installed compiz and when i restarted my laptop it just wont let me log on it keep freezing. i dono what to do how do i over write it or replace it or fix this problem?
iv looked on the wiki and tried what it says it doesn't work
My partner and I share the computer, so we are normally both logged in.
When we come to turn the computer off, one of us will log out then the other shuts down (to have a clean shutdown), but when either one of us uses 'Logout' the system just freezes, no response, nothing, have to turn the machine off via power button.
We can 'switch user' fine, and everything else appears ok but log out fails, I did try reporting a bug on this, but seems to have got taken over with people with dual screens / SLI cards, taking it over and its not the same thing.
I get the 'impression' its a graphics driver issue, I'm using the 'recommended' Nvidia driver (am at work and can't remember which version sorry).
I'm putting this in general, because I'm not sure if many of the specifics are relevant.I have an everex cloudbook which I purchased from eBay with hardy herron on it.I finally got around, today (I've had it for a year), to installing netbook remix 9.10 with a usb key I had also purchased from eBay.Now, during the upgrade (using update manager) from 9.10 to 10.04, the system appears to have frozen.(desktop frozen, no response to keyboard or mouse).Now, I'm not sure if something could still be happening inside there, and if it would be a good idea to let the machine site overnight before rebooting it. Frankly, it happened once already, and I rebooted, and update manager just took up where it left off once I logged in.
I have not determined what's causing these freezes. It's not a new machine, of course (everex, afaik, doesn't even exist now), so maybe netbook-remix is too taxing on the hardware? I installed xfce to get away from the bloated netbook-remix graphical menu garbage, which did seem to allow the system to run faster. Anyway, the real question here is, while the interface appears frozen, could the upgrade still be developing under the surface? (I hear a fan running in there. There is no hdd to spin, but flash memory, so I don't know if the fan is any indication of internal activity). Would you wait to reboot it? (update mgr indicated 4 hrs remaining to upgrade, in the installing upgrades phase, not downloading, appears it froze during "Running post-installation trigger install-info"). Or just reboot it and see what happens (get update mgr to start again?)? The system never froze on me with hardy. It was pretty quick and snappy, in fact.
Running Ubuntu 10.4 32bit (only) on my system with ati graphics card. I just ran a software update, and I believe a new kernel was installed. When I rebooted, I saw the "Ubuntu" loading screen, but then the system froze up and the screen went completely blank. Thinking it was a graphics issue, I tried to press escape to get into the grub bootloader. However, when I pressed escape at the proper time, the system just rebooted.
Thinking that grub was broken, I used a live cd to purge grub from my system and re-install it. When I rebooted, I got the same initial problem: I get the "Ubuntu" loading screen, but then the screen goes black and the system appears to be frozen. Again, if I press escape to try the grub bootloader, the system just reboots.
