OpenSUSE Install :: How To Remount Encrypted Home
May 21, 2011
After update to 11.4, I would like to regain access to my encrypted home that I left intact. Both user.img and user.key files are there, but when I create the same user again in YaST, it does not recognize their presence and it asks again for size of the image. I am afraid it will just overwrite the old image. I do have full backup of hte data, but since its 150GB, I would rather not have to transfer it again.
How can I remount my old encrypted home?
View 7 Replies
ADVERTISEMENT
Aug 16, 2011
while since I've been here. I'm having an issue with a fresh install of 11.04. Due to work requirements, I encrypted my home folder, which is fine, however, it seems to randomly lock itself down while I'm working, and it's getting really annoying.
Apps stop working, I can't open nautilus (something about not being able to create certain folders because home is locked), hell, even the terminal link on my desktop says failed to launch application (though the launcher on the top panel works). I just have to run ecryptfs-mount-private and enter my password to fix it, but it's doing this every 15 minutes or so. what might cause it to relock itself so frequently? I would expect to not have to deal with mounting my private data, that should happen at login and be good until log out.
View 3 Replies
View Related
Oct 5, 2010
I am trying to open an encrypted home directory from opensuse 11.2 with opensuse 11.3. This means i have a user.img and a user.key So far i have done:
losetup /dev/loop3 user.img
cryptsetup luksOpen /dev/loop3 home
Enter passphrase for /dev/loop3:
No key available with this passphrase. At this point it will not accept my passphrase.
A luksDump reveals:
cryptsetup luksDump /dev/loop3
LUKS header information for /dev/loop3
[code]....
When i try to use the key file, i get:
cryptsetup luksOpen /dev/loop3 home --key-file home.key No key available with this passphrase.
View 3 Replies
View Related
Dec 12, 2010
I am having a problem setting up an encrypted home directory with openSUSE 11.3. I used Yast User and Group Management to edit an existing user to encrypt the home directory and the user.key and user.img files were created in the /home directory. I tried it out and logged in as user and created a new file. I logged out and logged in as a different user and was able to see the newly created file in the first users home directory.
I figured I did something wrong so I went back to Yast and deleted the user. I deleted the /home/user directory using file manager su mode. I tried again to create a new user with an encrypted home directory using Yast and now when Yast tries to write the changes I get an error: "pam_mount is already setup for user. Use --replace to replace the
existing entry." I do not know how to proceed from here except to try with a different user name as I do not understand what the error message means and what command to use --replace with.
View 1 Replies
View Related
Apr 11, 2011
I'm guessing that a file is created as a loopback device and encrypted (using LUKS?)
What is the mechanism used at user login to decrypt and mount the encrypted $HOME and to re-encrypt it at logout?
I confess an ulterior motive here - SWMBO has recently got her hands on an Acer Aspire one running Linpus Lite and there's absolutely no security on it
Personally I'd dump Linpus and put on openSUSE but it's her box and she likes the simple interface that Acer have supplied so maybe I can set up the encrypted $HOME as YaST does for openSUSE if I can find out what to do.
View 4 Replies
View Related
Jul 24, 2011
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies
View Related
May 11, 2010
I'm using Ubuntu 10.04 64bit (Kernel 2.6.32-22-generic) and sometimes my /home partition is remounting in read-only and i have no idea why. Normally I only use programms like Firefox, Rhythmbox, Evolution and Netbeans 6.8. Should I switch to the EXT3 filesystem?
dmesg shows me the following information:
Code:
[ 8758.010352] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8758.010356] ata7.00: failed command: FLUSH CACHE
[ 8758.010360] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 8758.010361] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8758.010363] ata7.00: status: { DRDY }
[ 8758.010366] ata7: hard resetting link .....
Code:
badblocks -v /dev/sdb
Checking blocks 0 to 78150743
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found.
View 4 Replies
View Related
Jun 23, 2010
I encrypted "/" and "/home" during boot with F12. Now I'm trying to install F13. The problem is it will not allow to specify /home as the mount point. It will take /home and not complain but when I get back to summary there is no mount point, just blank. When I entered the passphrase it didn't complain so I think that is okay. The / dir I said I wanted to format, so it accepted the / mount point.
I tried to go ahead and install F13 anyway thinking it may figure this out. However it didn't use my /home but created a new /home.
View 3 Replies
View Related
Oct 10, 2010
I'm still running 9.10, but now would like to install 10.10. Now I'm wondering about how to keep access to my encrypted home folder.
Usually, I don't do an 'upgrade', but a fresh re-install. I have a separate /home partition, so normally this works just fine. However, my home directory is encrypted (a feature that was introduced with 9.10, I believe).
So, if I whack the system partition and do a fresh reinstall there, will the new install still be able to read my home directory? Or do I need to save a key file from somewhere?
View 1 Replies
View Related
Mar 18, 2011
I would like to give a few students a preconfigured Ubuntu USB stick with certain apps. I also encrypted the home folder in case of loss.
With TrueCrypt, cloning an encrypted container would be a big no-no because any one could just backup their header with a known pw and use it to decrypt anyone else's container due to each container using the same master key. I assumes the same applies to home folder encryption, yes?
Is there a way, other than creating a new user with home folder encryption, of forcing a master key change?
View 8 Replies
View Related
Mar 2, 2010
I have an encrypted filesystem that I've decided I don't want encrypted anymore. Seems the easiest way to do this is simply reformat the filesystem, but I can't. If I try to do it in YaST2 I get either system error code -3005 (unknown) or -3008 (apparently in use). When I try to do it from the command line I get:
Code:
frylock:/home/joel # umount /dev/sdb5
umount: /dev/sdb5: not mounted
frylock:/home/joel # mkfs -t ext4 /dev/sdb5
mke2fs 1.41.9 (22-Aug-2009)
/dev/sdb5 is apparently in use by the system; will not make a filesystem here!
frylock:/home/joel #
It's unmounted, I don't know how to make it any less in use than that.I can't delete the partition because it's not the last logical partition in the extended partition.
View 9 Replies
View Related
Feb 6, 2011
I haven't used encryption previously but through that for better security, I would enable it on one of my disks. I went though the process and when done, copied data to the device etc. My house had a powercut the other day and I noticed that the device did not mount automatically upon restart. Unfortunately, I have forgotten the de-cryption password and have lost access to my data. Is there a way of either recovering my password or getting the partition to mount without the password so I can access the data, copy/back up and then re-create the partition without encryption?
View 2 Replies
View Related
Jun 16, 2009
I'd like my /home partition to be encrypted. Does this need to be selected during installation (I don't remember seeing an option) or can it be enabled after installation?
How stable is this with ext4 on Fedora 11?
View 7 Replies
View Related
Feb 13, 2011
Recently installed Fedora 14 64 bit on a hardware RAID 1 from distro DVD, and set up an LVM with an encrypted /home partition. I now need to resize (enlarge) the /home partition and have not been able to do it due to system-config-lvm telling me:
"Logical volume is not mounted but is in use. Please close all applications using this device (eg iscsi)"
I have tried doing this logged in as user, and also as root. I've tried with a Live CD, but an additional problem there is that the Live does not recognize the hardware RAID and tells me I have the same /home partition in two devices, which are the two disks in the RAID array, and refuses to resize.
I found this link:
< https://help.ubuntu.com/community/Re...ptedPartitions >
which details a rather complex process to achieve what I want, but I am wondering if there is an easier way ?...
PS... forgot to mention I have been able to successfully resize all other LV's within the LVM, so I am assuming it is the encryption that is causing the problem....
View 2 Replies
View Related
Feb 24, 2010
I need to disable my encrypted home directory because it prevents me from logging in with my fingerprint scanner when I first boot up. I'm running kubuntu 9.10.How do I do this?Also, how would I revert back to it being encrypted if I decide to not use the fingerprint scanner for initial log in anymore?
View 1 Replies
View Related
Jul 13, 2010
I can't remember if i choose encrypt my home folder when i first install ubuntu.
is there a way to know if it's encrypted?
View 7 Replies
View Related
Nov 22, 2010
Dummy me let root run out of space because I didn't know to use logrotate. I was able to compress the system logs but not before the damage was done me thinks; now the computer is unbootable. I booted from a LiveCD and got my old partitions mounted under /media/oldroot to try and recover files; however, I forgot that I had encrypted my home. I found [URL] and was following it; however, I seem to run into a bunch of path issues after I chroot.
The chroot command returns:
bash: groups: command not found
The su command returns:
-su: cut: command not found
-su: getent: command not found
-su: expr: command not found
-su: groups: command not found
Finally, the ecryptfs-mount-private command returns:
-su: ecryptfs-mount-private: command not found
I have separate partitons for /, /home, /tmp, /usr, and /usr/local and bothered to mount the first 2. (If only I had been ambitious enough to create a /var). I was running Ubuntu 10.10.
View 1 Replies
View Related
Jan 27, 2011
I have choosen to encrypt Ubuntu 10.10 during installation (no alternate installation). After some time of working properly I get following error message after I put in correct password :
"Could not update ICE authority file /home/surf1/.ICE authority"
When I click "ok" following error message is shown :
"there is a problem with the configurationserver (/usr/lib/libconf2-4/gconf-sanity-check-2 finished with status 256)"
When I click this "ok" next error message appears :
"Nautilus could not create following necessary files : home/surf1/Desktop,/home/surf1/.nautilus"
After I click here ok nothing else happen anymore and I get not access to my account and so to my data.
View 3 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
Jul 27, 2010
I am running OpenSUSE 11.3 GNOME, and I recently reinstalled Windows, and it overwrote GRUB. I only have an Ubuntu LiveCD (I installed with the OpenSUSE DVD), how do I get GRUB back? Note that the Ubuntu LiveCD doesn't recognize the LVM Encrypted partition, so I can't mount it.
View 2 Replies
View Related
Feb 23, 2011
I've chosen to encrypt my swap partition while I was installing opensuse 11.3 on my PC.
I want to know how I can change its password(passphrase)?
View 2 Replies
View Related
Apr 2, 2011
I recently installed OpenSUSE 11.4 64 bit with GNOME yesterday and everything is going fantastic. I like it much better than Ubuntu 10.10 64 bit Maverick Meerkat because it is much more stable, reliable, and dependable. I own a heavily modified ASUS N61JV-X2 notebook PC. I installed OpenSUSE using the LVM based method and LUKS encryption. When I turn on the power to my notebook PC, it asks me for my password to decrypt my Intel 2nd Generation 160.00 GB Solid State Drive. I expected this behavior. However, I never get to see the OpenSUSE login screen. After I type in my password to decrypt my SSD, it loads up the desktop immediately. How do I configure my OpenSUSE so that I can see the login screen so that I can select my standard user profile and enter the user password to login?
View 9 Replies
View Related
Apr 5, 2011
I have a Ubuntu server with encrypted LVM2 (logical volumes - /, /var,/tmp,/home etc.). I need to migrate this to an OpenSUSE 11.2 server (cannot use a later version due to the availability of a binary-only module - that is just the way it is). When I fire up the installer, I cannot seem to find an option to mount the encrypted disk (/dev/sda) which has the LVM2 structure. I do not want to lose /home (logical LVM2 volume), so a clean blank slate install is not an option.
View 2 Replies
View Related
Aug 16, 2011
I've installed opensuse 11.4 by doing a network install, (boot off kernel + initrd, everything else is fetched off network) and i skipped the bootloader part because i've already got two other linux systems set up with grub2 on my computer. I picked the minimal server install (text mode) and didn't make any other software selectiono changes.
My partition layout is as follows
ssd drive contains / partitions for distributions (GPT layout) hdd drive contains encrypted lvm PV (PV on a luks partition). inside that PV is a VG with volumes for /home and /var (and other), where each distribution has its own /var.
The problem is that i cannot get initrd to open the luks properly. i tried chrooting, rebuilding the image with mkinitrd -f "lvm2 luks" ( i saw that somewhere on opensuse wiki, i think ) and adding boot parameters like this : lvm_box=/dev/disk/by-uuid/<luks partiiton UUID> lvm="box" (where box is the name of the lvm array).
[Code]...
View 1 Replies
View Related
Jul 7, 2011
I installed Ubuntu Server because I want to learn Linux and I want to learn about servers. I did a newbie tutorial and then shut down. When I booted up today, the files in my home directory were replaced by Access-your-private-data.desktop and readme.txt, but I have no idea why. I followed the instructions in readme.txt and typed ecryptfs-mount-private. It told me
INFO: Your private directory has been mounted.
INFO: To see this change in your current shell:
cd /home/rmob
But if I do ls /home/rmob, it still shows me Access-your-private-data.desktop and readme.txt instead of the files I created there yesterday. Every time I reboot, it tells me
keyctl_search: Required key not available
Perhaps try the interactive 'ecryptfs-mount-private'
If I try ecryptfs-mount-private again, it still tells me it has mounted it, but still just shows me those same two files. Googling about this tells me this means the directory got encrypted somehow. I tried typing touch ~/.ecryptfs/auto-mount which I found in this tutorial, but it didn't make a difference and I can't find any other solution anywhere.
View 2 Replies
View Related
Jan 2, 2010
I'm recently switched my work laptop from running winXP to runing karmic. I'm still at the stage of getting my various bits and bobs working correctly. One of these I (may) have a problem with is backup's. I've ran backuppc on a ubuntu 9.04 box in the attic for the last year or so and I've been backing up my laptop to that. But since the switch, since I have an encrypted home dir, what is being backed up is the encrypted files. First, can I recover these if needed (I kept a copy of my passphrase), or can I get backuppc to ssh in as me with my home dir mounted correctly?
Backuppc is using rsync over ssh I've been using linux on and off since about redhat 5.0, so I'm not afraid of the command line or vi
View 5 Replies
View Related
Feb 10, 2010
I recently did a clean install of Ubuntu 9.10 and when I did I chose to have /home on it's own partition and have it encrypted. The more I think about it the more I regret this decision. What if I want to switch distros down the road? What if I have to boot from a live cd to back up files? Is there a way to "undo" the encrypted home folder permanently? I don't mind having it on it's own partition, it's just the encryption that makes me worry.
View 1 Replies
View Related
Feb 13, 2010
I recently installed Ubuntu Karmic on my netbook (I tried netbook remix but preferred the look of the regular desktop edition). When during installation, the option to encrypt the home folder appeared, and being mildly paranoid I thought, "sure, why not?" (I must warn you that I am a new user with little technical knowledge other than what I have managed to gather in a semi-passive manner over the past couple of months). The problem is, I (try to) backup my data weekly, and so today I gave it a shot (I got the desktop edition a week ago). I have encountered the following problem.
I backup my system following (approximately) the instructions at [URL] for Backup The exact command I enter at backup is:
sudo tar -cvpjf 2010.02.13.tar.bz2 --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/home/dan/music /
(I exclude my music folder as it is huge and I already have it all in several other locations) When I executed this command all ran smoothly for a while, however it soon began backing up the directory /home/.ecryptfs/dan/.Private At this point, it started backing up the huge number of files in this directory. I assume these are encryption keys? Forgive my ignorance... Anyway, it took several hours going through this folder, and finally bzip gave up, complaining of excessive file size:
bzip2: I/O or other error, bailing out. Possible reason follows.
bzip2: File too large
Input file = (stdin), output file = (stdout)
I assume that excluding the encryption keys and such from the backup would be a bad idea: I guess that if I did not restore the relevant directories along with my home folder, it would be inaccessible? Is there a way to avoid backing up such a large amount of data?
View 5 Replies
View Related
Mar 15, 2010
During the installation of Ubuntu Karmic, I picked the option that encrypts my home directory.
A few questions:
(1) Shortly after installation, I was asked to run a command to print a key necessary for data recovery from a rescue CD. I didn't run it at the time and am now looking for the command to run. What is it?
(2) I think I read somewhere that this also encrypts swap. Great. Correct me if that's wrong.
(3) If I suspend the machine, is my home directory encrypted? That is, if I have this on a laptop and travel with the suspended laptop and someone steals it, are my data safe, or not?
(4) I assume the weakest point in the system is my relatively short login password (but I think the install tests it and found it okay). Is there a recommendation how long this should be?
View 3 Replies
View Related
May 21, 2010
I ran fsck on the wrong partition (which was mounted) and in my haste blew up the file system on that partition. Now here's the kicker, I had 450Gb of data and documents on that partition that was in an encrypted home directory. So the long and the short of it I ran fsck again and I was able to recover all the files, and they are now residing on a Lost+Found folder on my hard drive.I have located the encrypted files, but I don't know what to do with them.
View 1 Replies
View Related
