General :: Tried To Install Cmap Tools Bin - Permission Denied
May 15, 2011I need to install CmapTools, but it won't let me. Tried to install a .bin but "bash: ./CmapTools64.bin: Permission denied".
View 6 RepliesI need to install CmapTools, but it won't let me. Tried to install a .bin but "bash: ./CmapTools64.bin: Permission denied".
View 6 RepliesFirstly, i'm NEW to Linux and my very first time with DSL. I'm installing this on an older Dell Latitude laptop.
I just finally got the DSL installed on my HDD successfully and then I added feh to start and run at start up, then I rebooted and now i'm getting this error:
No, directory, logging in with HOME=/ -bash: cd: /home/dsl: Permission denied
I have tried reading numerous websites but none explains to the level whereby I can understand. I even tried rebooting from the CD, but could not figure out how/what to do next?
The question is, can someone explain how I can use the DSL CD to try to correct this error. More importantly, can you explain in layman terms so that I can actually put it good use.
Also, some additional questions I have....when you download a file where does it save to?
I have modified /etc/sudoers using visudo command to give the user "runner" to give all access without password.capture of sudoers file
# User privilege specification
root ALL=(ALL) NOPASSWD: ALL
runner ALL=(ALL) NOPASSWD: ALL
But still the "runner" is getting permission denied error when trying to open files with "(-rw-------)" permission in/shutdown
I'm trying to install the Aurora engine for themes on Ubuntu 9, and I'm pretty new at all this... so sorry if this error message is a little long... it goes through the installation, then it gives me an error message.
Here it is:
Now run make.
I am trying to install an application from the media after typing the INSTALL command I get permission denied even as the root. What is the reason ? I am running SUSE 11.1.
View 5 Replies View RelatedI'm trying to install netpbm on my dedicated server and I'm getting the follow message every time I try to run ./configure
bash:
And I know I have permission to run ./configure because I tried it on a different software and it ran just fine.
And I can't even do the make either because I got a permission denied again. Can anyone help me out here? Thanks.
My dedicated server is running CentOS 5.
I wanted to install Matlab2011 in fedora15 and i receive this following: Preparing installation files Installing ./install: line 589: /tmp/mathworks_2110/java/jre/glnxa64/jre/bin/java: Permission denied Finished. I think the problem was Java, but I updated java and still is not working.
View 1 Replies View RelatedAfter some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):
Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.
Abort, retry, ignore? [a/r/i/?] (a):
If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?
I'm running openSUSE 11.4 (gnome) and I'm trying to transfer files to my windows partition and it says that I don't have the permission to do so. How do I gain access to it?
[URL]
I didn't back up the blasted /etc/httpd stuff.
I do a "clean" root-only install; i.e., the only partitions that are formatted are the root and usr partition leaving the others untouched (so I don't have to restore the entire thing every time or fiddle with updating). That leaves almost everything in place with only a few edits and additions to make to get back in business; smart and dumb and the same time, sigh.
The partitions look like this for what it's worth:
Code:
Anyway, my web server comes up just fine and other applications work as expected except for Bugzilla and I can't remember what the heck it is I have to do to get it going again. I add a file, httpd-bugzilla.conf in the extra directory and include it at the end of httpd.conf:
Code:
In the above, /var/www/htdocs/bugzilla is not a symbolic link, Bugzilla is actually installed there (and has worked just fine for a long, long time). And, yeah, I know I'm not really supposed to do that but there it is.
I also run checksetup.pl which completes cleanly (it also sets permission masks and group) and double-check that localconfig looks like it ought to.
Seems like that ought to do it, but...
Code:
I'm running Fedora 14, with a SATA interface CD/DVD drive and I'm attempting to run an installation script on a CD for an embedded Linux learning kit.Logged in as root (su), I receive:bash : /media/EmbeddedLinux/install_tools Permission DeniedI have searched and see similar situations on the web, but not exactly the same.I cannot resolve this issue using chmod, and find no relevant exec rights set in /etc/fstab.Using mount I find the (automounted) CD drive on /dev/sr0.I've searched quite a bit but never could find the thread that was supposedly listed in this forum.I understand that I should be able to copy the contents of the folder to my machine, then execute, but if possible I would prefer to address the real cause, not go around it.Also, where on earth will I find the location of whatever is affecting the ability to execute from an automounted media?
View 5 Replies View RelatedI'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
I've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.
My linux is Kubuntu 9.04, I encountered Permission denied problem when I wanted to install the openscientist source file (osc_batch_source_16.9) in the following order.
1) cd OpenScientist/16.9/osc_batch/16.9/obuild
2) source setup.sh
3) ./sh/build in this step Permission denied message appeared.
The root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
I'm hoping someone can help me out with this issue I'm having using acl(s). I have a user I want to grant access to logs I have stored on my server. I am doing this by setting up an acl to that directory where the logs are stored. My settings seem to look fine, however I cannot read or even reach the directory with the said user; we'll call him "userP".
Here is my code:
To ensure userP has access to the parent directory (jboss) code...
Not sure what I'm doing wrong here: there are no errors in the logs; just "Permission denied" however I try to get to the directory.
Does anyone know what I'm doing wrong?
On the current machine:> su - username (it works)> ssh username@localhost (doesn't work)
What could be the problem?
Since lucid was installed, I can no longer access my floppy drive. I try creating an image on it and this happens:
$ dd if=a.img of=/dev/fd0
$ dd: opening `/dev/fd0': Permission denied
How do I get permission to do this? I'm the only user and am an administrator.
I am installing Oracle 11g on Oracle Enterprise Linux 5.0 32 bit (virtual machine)i did all the mandatory steps, i am trying to run the installer but i am facing the below:bash: ./runInstaller: /bin/sh: bad interpreter: Permission deniedknowing that the run isntaller is found in an iso file, in which i linked the VMwarre CD/DVD drive to it
View 4 Replies View Relatedi am trying to make my SSH-server more secure on my unbuntu server. And i want to do a little modifiing to the /etc/ssh/sshd_config folder. When i try to accsess it is says permission denied if i do sudo /etc/ssh/sshd_config it says command not found.
View 3 Replies View RelatedI'm using the find command in a PHP script like this to update permissions on all files but not directories:
<?php
// whole bunch of code
exec("find /var/www/vhosts/mydomain.com/httpdocs/path/to/some/directory -type f -exec chmod -R 440 {} ;");
[code]....
After I type sshd: 192.168.1.11 : allow and
sshd : ALL : Deny
I can't access hosts.allow or deny any more.
It says "Permission denied"
Before I typed that, I can access hosts.allow and deny.
By the way, I was wondering what command to edit hosts.allow.
For example, I want to put sshd: xxx.xxx.xxx.xxx : allow in that file.
I am installing ubuntu to amazon EC2 by following the steps at [url] The installation works fine.
Then I want to gain Remote Desktop Access to Ubuntu, so I follow [url]
However, fail at sudo /usr/lib/nx/nxsetup --install due to this file is missing.
I then use putty, navigate into /usr/lib/nx to run command below.
wget [url]
But, it always come out with permission denied issue
I also try to upload the .tar.gz file via winscp to any of the possible directories.
All fail with permission denied issue.
Permission denied.
Error code: 3
Error message from server: Permission denied
Request code: 3
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies View RelatedI am not sure if this is posted somewhere else, if it is sorry. Anyways I downloaded files to my desktop from firefox and i need them to be in usr/local file, but if i try to put it in there it tells me permission denied. Is there anyway around this?
View 5 Replies View RelatedI tried writing zreos to my HD but it denied permission. How do I get around that ?
View 6 Replies View RelatedIf I run this as su I get the same thing. If I log on as root user It is the same as well
View 5 Replies View RelatedI have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies View RelatedWhen I create a folder in the system, it's created successfully
Code:
[test@localhost localhost ]$ cd test/
-bash: cd: test/: Permission denied
drw-rw-r-- 2 test testinstall 4.0K Sep 16 18:51 test
[root@mail tmp]# ./PE1650_RAID_FRMW_LX_R168387.BIN-bash: ./PE1650_RAID_FRMW_LX_R168387.BIN: Permission deniedalso get it when trying to run[root@mail tmp]# ./ESM_FRMW_LX_A37_R117418.BIN-bash: ./ESM_FRMW_LX_A37_R117418.BIN: Permission denied
View 2 Replies View Related