OpenSUSE Install :: No More Peaceful Coexistence Of Win7?
Dec 24, 2009
If I understand correctly, there is no more "Install Linux as a second OS, and Windows will run as it is. Linux won't disturb it". If Grub is installed on MBR, Windows 7 will not install service pack.
If the MBR is left untouched during the installation of Linux, the active flag has to be switched from Windows's partition to Linux's partition. This again will prohibit Windows 7 from installing a service pack. Thus installing Linux as a second OS and giving the computer to somebody who is not expert in partitioning and booting will lead to trouble if Windows is regularly used. Is this correct, and is there a solution as to not creating worries for the Windows users by installing Linux?
View 9 Replies
ADVERTISEMENT
Jul 9, 2011
Just installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
View 3 Replies
View Related
Feb 25, 2011
Currently I am running a dual boot with Windows 7 and openSUSE 11.3. Windows has two partitions, one for the system partition and another for the OS. I have 3 Linux partitions (swap, root, and home). Obviously I am running GRUB to boot, but this seems to be impacting my ability to install Windows 7 SP1. I would like to revert back to the Windows boot loader, install the Service Pack, and then revert back to GRUB. How do I do this?
View 9 Replies
View Related
Mar 22, 2011
There are three new "k1DZ 1n the Block" for CAD users in Linux :
Bricscad
Ares Commander Edition
Draftsight
there used to be Varicad, which also runs in 64 bits natively, as well as QCad ( 2D only ) and BRLCAD ( more of a solid modeler than a Drafting program ), both built from source. Those new K1dZ out there are awesome, but they only run in 32 bits. My system is Squeeze 64 Bits and has multilib enabled... i can install the *deb, and it complains about architecture, so i use --force.. default install is in /opt... still this asks for some libraruies which i do have for 64bits, but do not exist for 32...
So my questions are :
Should I install these 32 bits libraries to run the application ( mostly issues related to rendering ) they would land in /usr/lib32/...
But naming convention in apt or synaptic would still refer them by the same name as their 64 bits counterparts. How does apt (synaptic ) deals with this?
I find all this to much of an unnatural thing to do to my Squeeze install just to make an app fit and run. So far I can remove the app using synaptic but I am very reticent about installing those 32 bits specific libs required by the app. I already have the ia32-libs metapackage installed.
View 3 Replies
View Related
Jul 26, 2010
partitioning and maximum installation success for having both these OS's run a brand new notebook, starting from scratch?
View 8 Replies
View Related
Aug 9, 2010
After installing Windows 7 my computer doesn' t ask which OS to start. I starts with win7 automatically. How can I start my computer with OpenSuse?
View 2 Replies
View Related
Mar 14, 2010
i currently have XP 32bit and Opensuse 11.2 64bit installed, i would like to install win7 64bit but don't want to screw up my opensuse installation. If i format my win partition, and install win7 should i still get a grub menu?
View 1 Replies
View Related
Sep 30, 2010
I'm used to be a Ubuntu user at first,and using its Grub loader so far.Several moths later,I just find that may be Opensuse is another good choice.So I installed Opensuse 11.3 without grub using KDE Livecd version because it cant find the Ubuntu partition while the install process,but the install application can find Win7 installed in my laptop.Soon I logined to Ubuntu and Updated the grub settings in Ubuntu.This grub program in Ubuntu found that there's a Opensuse 11.3 on a partition. So I can login to SUSE by Ubuntu's Grub.But Now I want to use SUSE its own Grub.So what should I do to change my default Grub Loader from Ubuntu's to SUSE's?
View 9 Replies
View Related
Feb 22, 2011
I am new to linux , I installed Suse 11.3 a week ago on my new iMac 27'' core i7 and my experience have been wonderful so far. However I would like to install windows beside Suse (for games and windows only apps). I used bootcamp to create a 200G partition for Suse, and I would like to partition the bootcamp further to install windows beside Suse, and choose the OS at boot time using rEFIt. I searched google and couldn't find a guide for installing windows 7 when linux is installed first.
1- I want to learn how to partition the boot camp drive using suse to create an empty partition for windows install.
2- I want to learn how to install windows 7 on the mentioned partition without harming any boot configurations, as I said I want to be able to choose from the OSes at boot time using rEFIt bare in mind that the current installed OSes are suse 11.3 and OS X.
View 3 Replies
View Related
Mar 14, 2011
I have Opensuse 11.2 installed (on hd0 at the time of installation) To install Windows 7 alongside I had to switch my hard drives (hd0 became hd1 and vice versa) What is the best approach to reinstall grub and get both Opensuse and Win7 visible in the grub menu?
View 1 Replies
View Related
Mar 29, 2011
Hardware issue forced me to restore Win7. Installed EasyBCD to boot into openSUSE, no work. Boot puppy, it shows space where SUSE should be as unallocated space. I think Puppy doesn't see ext4 though. Can't boot live KDE off USB for some reason, though I originally installed from that exact medium. Tried ACPI=off and nomodeset. Error says trouble mounting clic filesystem, mounted as read only. Something like that. Then reboot 120secs, which it never actually does. I don't want to reinstall SUSE if I don't have to.
View 9 Replies
View Related
Apr 3, 2011
I have an ASUS N82 model notebook with Windows 7 and an ATI Mobility Radeon HD 4670 GPU. I downloaded the openSUSE-11.4-DVD-x86_64.iso file and tried to run it from my desktop using Daemon Tools LITE software. The install program for the installer started up and let me progress all the way to the final screen at which point it starts extracting files and then I almost immediately get this error message: "Cannot exec bcdedit.exe"
I have done everything I know to do to make sure that I am signed in and running the install as an administrator. I even ran the command prompt as an administrator to make sure that I could run bcdedit.exe myself and it ran fine.
View 7 Replies
View Related
Jan 4, 2010
I decided to install windoze 7 and it finally worked. It was complicated, I have two HDD's on cable select and the one I wanted M$ installed on was second in the series. So I changed that around and it finally installed. I then changed it back to the way it was and now of course grub works for SUSE but not M$. I get error #13. My Windows drive also does not show up in sysinfo:/. I went to terminal and ran fdisk -l and
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0004924b
Device Boot Start End Blocks Id System
/dev/sda1 * 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 9726 76019580 83 Linux
Disk /dev/sdb: 472.3 GB, 472345632768 bytes
255 heads, 63 sectors/track, 57426 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x30ceb02f
Disk /dev/sdb doesn't contain a valid partition table. And that is the outcome.
View 4 Replies
View Related
Aug 21, 2010
well, gonna straight-explain what I`ve here: had a Win7 64bit installed machine and created a D drive as I was intended to install Suse there (so it`s `Extended`) after succesfully installed SLED and finally restarted the laptop to see use Win7 again there was no Loader for me to choose which Operation System (I have another machine with XP,Ubuntu and Pardus - never had sucha problem)then I had to chose SLED of course but this time it didn`t bring me to the login page but to the Command Line of SLED, and the thing is that I can`t use command line on linux. tried several times and with failsafe login but stıll having command line and there is no Win7 to run on Loader.
View 9 Replies
View Related
Apr 1, 2011
I am trying to Dual-boot Windows & and OpenSUSE 11.4, and have run into walls all over the place. Here is what I did:
1. Windows 7 was already installed. (Don't like it, freezes all the time)
2. Installed OpenSUSE using default partition options.
3. Booted into OpenSUSE with no problem
4. Tried booting into Windows, no joy.
5. Got that figured out, now I can get into Windows.
6. GRUB is gone, so now I can't get back into OpenSUSE.
View 8 Replies
View Related
May 22, 2011
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies
View Related
Apr 20, 2011
The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies
View Related
Jun 11, 2010
i've managed to clean instal my very first linux based os on my laptop. is there anyway to install win7 on top of opensuse? and dual boot them? I'm asking this is because i've done a lot of searches but my results are all opensuse on top of an existing m$ system. perhaps i have not searched enough.
View 9 Replies
View Related
Aug 7, 2010
borked the bootloader by my own doing. When I got this machine, I had a single HDD. I partitioned it with a primary partition for Windows, followed by an extended partition with swap, /home/ and /, as well as a FAT32 partition for "general" data. (this was before NTFS write support was common) This worked well with the Win2K install. Eventually, I added a second HDD, which became part data storage, and part Windows XP install. I eventually put Win7 on it, and pulled the other HDD during setup so that the boot order of the drives determines whether I boot Win7/XP or get GRUB.
However, my "data" partition was not visible in Win7... It shows up as an unknown FS in the disk management. OK, I thought. I used Paragon partitioning software to move the "data" partition out of the extended partition and make it a primary. I could now access it from Win7. I didn't realize I had GRUB set to boot from the extended partition, so now when I boot from that HDD, I get "no operating system". No problem, I thought. I'll pop in the install CD (NET), use it to boot the installed 11.3, and run the boot loader setup. Nope- setup just hangs. Tried it with an 11.2 DVD... doing a "boot installed system" nets me a few moments of searching, "evaluating root partition", and then "no valid linux install found". Trying the boot loader reinstall from there nets me an "error changing to target environment" and the install fails.
I can still mount the / partition via rescue mode and all files appear to be intact, so I don't think I've lost any data... just grub/the MBR is borked. I've already moved the data partition back in to the extended partition but no luck. Still the same story... thus I'm stuck booting Windows until I fix this.
View 8 Replies
View Related
Dec 5, 2009
I am trying to install the latest SUSE in a virtual machine created on 64 bit Windows 7 Ultimate. When the CD loads in the VM's console it says 'This is a 32 bit computer. You cannot use 64 bit software on it'. I am running the free VmWare Server 2.0. Windows 7 sys info clearly shows it as 64 bit OS, and it is running on i7-720 (definitely a quad core 64 bit proc).
View 6 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Dec 31, 2010
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies
View Related
May 2, 2011
I had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
View 9 Replies
View Related
Apr 23, 2011
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies
View Related
Sep 1, 2011
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
View 8 Replies
View Related
Jul 21, 2010
This is the first time I have run into issues mounting windows shares but I really can't figure this out. Can someone put me out of my windows misery please.
First off, last week I rebuilt my work PC fromWIN7 32bit to WIN7 64bit since then I can no longer mount the window share on my ubuntu server:
I recreated my windows share called "Linux" and used the properties, advanced sharing and added everyone, full access and my domain account full access.
If I browse to \ipaddress I can see my share and access it. From a XP machine I can see the share and access it.
From linux I use the same mount point as before, /linux I use the same fstab and it fails
Code:
I try this manually now:
Code:
Next I try to mount it:
Code:
I looked at my firewall rules and they seem ok.
Next test was connecting to my 2nd pc on windows XP no probs mounted first time.
What is wrong with my new Win 7 setup?
View 2 Replies
View Related
Apr 18, 2011
I have been running ONLY linux (ubuntu) on my computer for years now. However, a friend sucked me back into the world of MMO's (angry fist @ RIFT). So, I decided to pick up a new disc, slap windows 7 on it and now want to dual boot.Basically I had to do some disc juggling to get windows to play nice. So my windows drive is now first, then my Ubuntu drive second.Its been a while so I'm wondering how involved / what would be the steps to get grub2 to chainload into windows7 (in my head I want to say I'm going to boot into the live cd, mount the windows disc and reinstall the loader to the windows drive since its the first disc in the chain?)
View 1 Replies
View Related
Jul 5, 2010
I just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows. What can I do to fix this?
View 4 Replies
View Related
Aug 6, 2011
I have Vbox 4.0.4_OSE installed on my 11.4/KDE4.7 Laptop with Win7 and WinXP VMs installed. Generally runs well, although the Win7 VM seems to lock up on occasion if I ignore it for too long. Compared to having to reboot to Win7 to do the few things still stuck on Windoze, it is a GREAT solution.
Question: I have seen several forum items related to difficulty with dual boot systems and the installation of Win7SP1, regarding SP1s checking the MBR for the Win7 boot loader. Has anyone done a SP1 update to a VM on Vbox? It is sort of unclear what SP1 might see in the VM disk container associated with the VM. Since the initial load process for a new VM is time consuming, I thought I would ask first before blowing up my otherwise working Vbox system and then having to reload from scratch.
View 3 Replies
View Related
