OpenSUSE Install :: Lost Partition Table All The Time?
Mar 25, 2010
As soon as I install and reboot OpenSUSE, my partition table gets lost somehow. Here is some information about my system:
Dual-booting system with Vista and OpenSUSE 2 SATA hard drives combined into one with Vista installed on them. 1 IDE hard drive with OpenSUSE installed on it.
When I install OpenSUSE, it loads fine right after the installation. Then, when I reboot the computer and select to load OpenSUSE from the Grub loader menu, it hangs right after:
root(hd4,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-IC35l....... and so on
I tried running System Repair off of a DVD and automated test - it tells me that the partition table is lost. I choose to recover partition table and after a while it does but I am still unable to boot.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work. i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
Kmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled. 100503 10:00:15 InnoDB: Started; log sequence number 0 31413862 100503 10:00:15 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without
I installed openSUSE on a XP runnng computer and every thing is OK.When I tried to Install a new XP, I got this error:Code:Invalid Partition Table I fixed it by reinstalling GRUB using Rescue System.I tried fix mbr on XP Repair System and I got that error again.Now I want to keep XP and remove openSUSE. But computer only boots by GRUB and XP's boot loader is unable to boot and shows that error
Is there a difference between using GPT partition table when formating hard drives and MS-DOS partition table? What are the advantages/disadvantages of using either?
Ive been running crunchbang on my system, and yesterday decided to try opensuse so i can install the novell client. I ran the live gnome cd and during installation I shrank my main partition down and created a new partition for opensuse. Installation went well other than sometimes programs close and make the part of my desktop that they occupied useless.
Question 1) I can see my crunch bang files through opensuse but i cannot find or boot into crunch bang.
question 2) Why are these programs closing and then killing my desktop? Say i have a Firefox in the top left of my desktop and it errors and closes. I go open Firefox again, anywhere that the old Firefox window was in ( not click able). My cursor will turn to the text cursor as soon as it enters the x y position. I have to restart the laptop to be able to click file or insert a web address.
While trying to get Grub working on my computer, I accidentially overwrote the partition table. Luckily I did a fdisk -l and copied the information before I did anything. The problem is that the first partition "does not end on cylinder boundary" so when I recreated the partition info using fdisk, partition 2 doesn't start in the right place and cannot be read. I have some pretty valuable data on there and I can't afford to lose it. Is there a way to create a partition that doesn't start on a cylinder boundary?
I need to copy partition table for sda, I have 3 primary partitions and 1 extended partition on sda. I understand that fdisk cant copy extended partition table and I need to use sfdisk.
Correct me if I am wrong -
1. For primary partitions
Code: dd if=sda-mbr.bin of=/dev/sdX bs=1 count=64 skip=446 seek=446 2. For extended partition Code: sfdisk -d /dev/sda2 > backup-sdX.sf Where it will store the files after backing them up. I tried SUSE 11.2 DVD, it has back up partition table utility under repairs-advanced options but it suggests saving partition table to floppy. Why it doesnt offer to save it on a removable medium or to CD.
I was trying to perform a new install, so sensibly made a back-up of my data to my external drive. Unsensibly, I didn't unplug the disc before starting the install and the install trashed the partition table/FAT on the external drive.I've used disktree and can "see" that the disk has lots on it, but I cannot access it.
I have installed the fedora 13 x86_64 live cd. I updated fedora as well as installing gparted.y hard disc containing my operating systems is not being read by gparted.unalloacted partition table. Also i am not able to mount a ntfs parition on the same hard disc.I did create the partition table on all hard discs with gparted livAnybody else had this problem? A kernel crash is also reported.DIT:I booted ubuntu 10.04 and opened gparted v5.1 without any problem. I booted fedora 13 again and now gparted 5.2
I have never seen this before wit any previous versions of ubuntu - wondering if anyone else has seen it or can explain it. The break down of the partition table is being viewed with Ranish Partition v2.43 It's old program, but it has been really handy.
What is happening is: Prior to the install of ubuntu on the 3rd Primary partition, you'll see that the 4th partition (which has a couple of logical partitions in it) starts at: (14,380 - 0 - 1) ===> Cylinder - Head - Sector After the installation of Ubuntu 10.04.1 LTS it shows a Non-conventional start point of: (14,380 - 0 - 62) =====> Cylinder - Head - Sector. An unused is left between the 3rd and 4th Primary partition.
This is not a big deal - just unusual (IMO) With the same partition layout (pre install) It doesn't matter if I install ubuntu on the 1st, 2nd, or 3rd primary partition. The 4th one ALWAYS gets changed this way.
Purpose: Python, PHP, WebKit (hopefully), and pyqt development. There is Wubi for Ubuntu, which I am using right now. But Ubuntu 11.04 doesn't work well with my system. There is a Wubi like installer for Puppy Linux. There is Debian Win32 installer, but I think that does touch the partition table. My last option is to simply grab Ubuntu 10.04 LTS and hope it works. Would that be a viable solution considering my needs?
Using ubuntu minimal install 9.10 for a htpc. My boot drive is a 2Gb disk on module. When using advanced install I am eventually given the option to format the drive and ultimately the option to pick what sort of partition table type. I am not sure what to pick; it appears to have msdos as a default. Here are my options:
aix amiga bsd dvh gpt mac msdos (default?) pc98 sun loop
Some appear to be obviously bad choices; but I am not sure. Any ideas on which would be a better pick for me? I have already used msdos and it seems to work fine.
Do i have any chances to restore my windows partition table after tried to install debian and i used the entire disk instead of the free space i had alocated for this
after i figured out what i did i stoped the installation but was to late ... i answered yes at write partition table changes on disk question
i tried win7 automate recovery tool from dvd and manual install of mbr with no successful result
I have installed HP g6 notebook from live-cd with 10.04 LTS across multiple partitions, only to find that the partition table is not setup correctly. I place the following mount points on separate partitions:
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
I was reading another thread about someone with a bad partition table and I decided to join this forum. I'm not going to take any drastic actions with the partition (/dev/sda3) in question. I am going to wait for instructions on what to do first. I am not very good with Linux and need some hand holding. System: DELL 4550 Dual-Booted with XP and Ubuntu. Works OK, just no swap. Well, here's what I did: I deleted a partition for Windows XP Pro because it was a trial, and it ran out. I then decided to slide the swap partition for the Ubuntu Linux that I dual-boot into over. (If this was successful, I was going to try expanding the root partition to take up the unused space.) I used Gparted on a CD to do this, as I figured it was safe to do.
I now cannot mount the swap space at bootup (and have to go into a backup version of the OS), although I can use Gparted in Linux to execute the "swapon" command, and it appears that it worked because I now see "swapoff" as an option on the context menu. (I actually don't even need a swap partition, except to hibernate.) If I highlight the swap partition and click on "Drive" on Gparted's menu bar and select "Create Partition Table", it will erase all data on /dev/sda, so how do I fix the bad partition table non-destructively?
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
I just installed Fedora on my pc with windows XP pre-installed (dual boot). I had the same setup with ubuntu before with no problems. My ntfs windows partition is of 15 gb approximately and the remaining space that was available for fedora was about 220 GB (non partitioned - I removed all the partitions excepting the windows one using gparted from liveCD prior to beginning installation) ..........after installation etc etc.....my home folder shows me only 150GB of space.....what's happening? Where has all the remaining space gone to?
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
Is there a program that will reread the partition table and update the kernel even if one of the unmodified partitions is mounted? I installed my system on one partition, then I added another with free space. Now I want to format the second partition, but the kernel doesn't know about it yet. I tried sfdisk -R /dev/sda, but it refuses while the root partition is mounted. Is there anyway I can avoid rebooting?
USB flash disk partition disappeared as well as partition table I'm not sure about the cause
Code:
root@u# less /var/log/syslog usb 5-1: New USB device found, idVendor=058f, idProduct=1234 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Where did the partition table go? The device had one ext3 partition something around 4GB(size of USB storage device). I need to restore few files from this device.
I'm trying to clone a Linux install to a different laptop. It's made a little complicated by two facts:
1) The 'new' laptop I'm trying to copy my Linux installation to is actually older and has a smaller hard drive then the computer I'm copying from
2) The computer I'm copying from has both a windows and Linux installation; I only care about the Linux partition.
I figured I would copy only the Linux partition from my primary computer to the laptop, sense the laptop doesn't have a large enough hard drive to copy everything. So I used the DD commands to copy SDA3 (main Linux partition) from my main computer to SDA2 of my laptop. When I came back a few hours later I was surprise to find my laptop trying to reboot itself (I never turned it off). It would keep starting to reboot, failing, and restarting itself. Not too surprising sense its boot partition wasn't changed so it's trying to boot into centos when I copied a redhat partition to it.
The problem is that when I used a redhat boot disk the rescue mode was unable to find a Linux partition to mount. /dev/sda2 exists, but trying to mount it gets the complaint "No such file or directory". "fdisk -l" lists sda1 (the boot sector) and sda2. Sda2 is the correct size and reports Linux LVM for its system. But "fdisk -l /dev/sda2" gives the error message "Disk /dev/sda2 doesn't contain a valid partition table" Did I not clone the drive correctly, or was an error caused due to the boot sector not being copied yet (the laptops boot sector is smaller then my old computers, so I can't copy from old computer to laptop)? Can I salvage the laptops partition table somehow, or do I have to repeat the cloning process? And if I do have to re-clone my computer can anyone tell me what I did wrong the first time so it works this time? I don't care if I copy just the Linux partition or both windows and Linux. Even though my main computer has a larger hard drive I'm only using about half of its available space so it should be possible to copy both partitions if I could ignore the unused sections of the harddrive.
Edit: I used DD to copy a tiny part of the Linux partition from my laptop so I could look at it. Most of it is illegible binary of course, but I scrolled through till I found some text right near the beginning:
Code:
VolGroup00 { id="F2MWxh-....-BidcLe" seqno = 1
[code]....
So it seems that the DD command did copy everything over to the laptop, which is good to know. I noticed that it says device="/dev/sda3" right in the middle of the code I just posted. The Linux section of my original computer was SDA3 but I copied it to partition SDA2 of my laptop. So is the problem because the boot partition is for the wrong device? I don't suppose if I modified that one line to say SDA2 it would be able to load correctly? (Not that I know how I would modify the line, short of using the DD command again).
What I believe has happened is that I've corrupted the partition table. Essentially one of my partitions' ending point exceeds the maximum number of cylinders/sectors on my drive.
Essentially I have the same problem as on the thread @ [url] but do not know how to fix this and am afraid to reformat/partition based on sectors without really knowing what I'm doing here.
[code]...
When I try to look at SDA in GParted everything shows up as unallocated (though it's obviously not) and it says
In my efforts to resize my BTRFS Partition, I accidentally unmarked my BTRFS partition as being BTRFS, and can't mark it back as I can't find the numeric ID for BTRFS and how to apply.
PAM time restrictions - changing Time.conf so it gets time from a sql table. I was wondering with the PAM authentication module (pam_time) that I can grab time from a server using sql/postgress which uses TIMEDATE function to get the time of logging out into pam_time? So basically I want to insert sql statements into Time.conf which would get the time from a table.
I installed Ubuntu as shown in the wiki and when I went to restart it gave me a lovely blinking cursor and nothing else. So I held down option, loaded into osx, reinstalled rEFIt and got my menu on startup. Unfortunately, the partition sync tool doesn't seam to be working, it gives me an error: Status: MBR partition table is invalid, partitions overlap. Error: Not Found returned from gptsync.efi
I have two different table in a database in mysql that has no share key with each other and I want to sort them with each other on their date time column I mean when I sort it row X of table A that is older that row Y of table B comes earlier.
