PAM time restrictions - changing Time.conf so it gets time from a sql table. I was wondering with the PAM authentication module (pam_time) that I can grab time from a server using sql/postgress which uses TIMEDATE function to get the time of logging out into pam_time? So basically I want to insert sql statements into Time.conf which would get the time from a table.
View 1 RepliesHow to configure proxy server with SQL table user authenticationon fedora core11
View 1 Replies View RelatedKmail 1.13.2 Problem on startup, error is from nepomuk, data storage. "cannot find Redland backend, nepomuk is disabled until fixed. Also see the following error from the akonadi console:
100503 10:00:15 [Note] Plugin 'ndbcluster' is disabled.
100503 10:00:15 InnoDB: Started; log sequence number 0 31413862
100503 10:00:15 [Warning] Can't open and lock time zone table: Table
'mysql.time_zone_leap_second' doesn't exist trying to live without
[code]....
I am using FC9, I want to write a module that will always show current time after booting.But for that I need not only to load module using insmod/modprobe, but also to compile that module during boot time.How can I perform this 2 steps correctly.
View 11 Replies View RelatedSituation: fresh dovecot install. I have postfix successfully accepting and delivering mail to a virtual mailbox. I'm trying to pop that mailbox, but it can't see it. I hope someone can point out where my config is wrong.
View 2 Replies View Relatedwhat is the translation table and referance table in any DB (with referance to Data conversion)
View 2 Replies View RelatedAs soon as I install and reboot OpenSUSE, my partition table gets lost somehow. Here is some information about my system:
Dual-booting system with Vista and OpenSUSE 2 SATA hard drives combined into one with Vista installed on them. 1 IDE hard drive with OpenSUSE installed on it.
When I install OpenSUSE, it loads fine right after the installation. Then, when I reboot the computer and select to load OpenSUSE from the Grub loader menu, it hangs right after:
root(hd4,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-IC35l....... and so on
I tried running System Repair off of a DVD and automated test - it tells me that the partition table is lost. I choose to recover partition table and after a while it does but I am still unable to boot.
I have two different table in a database in mysql that has no share key with each other and I want to sort them with each other on their date time column I mean when I sort it row X of table A that is older that row Y of table B comes earlier.
View 3 Replies View RelatedMy distribution is Fedora 7 and now I am testing the use of PAM. As I know, the pam modules will generate log to syslog and I can find related records tagged with 'pam_access', 'pam_unix' etc at /var/log/secure, but cannot find the one tagged with 'pam_time', only a record showed 'Permission Denied'. So how can I find the exact log of pam time module?? Below is my setting for pam time:
at /etc/pam.d/remote
#%PAM-1.0
auth required pam_securetty.so
auth include system-auth
account required pam_nologin.so
account required pam_time.so
account include system-auth
code....
Running Ubuntu 10.10 and I'm getting annoyed by the password authentication each time I want to do something. I find this more annoying than Windows 7 and UAC
View 9 Replies View RelatedI want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
i need to prepare a presentation for that i have to copy a table from [URL] to my power point slide. but when i am copying it i am just getting a table with single column. is there a method to import the contents from web page table to my presentation table?
View 2 Replies View Relatedi installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
We purchased a virtual server from GoDaddy (1 month trial) to set up as a proxy for our networks (24 of them). I am having 2 separate issues. The first is I can't configure/install NAT and support is telling me the only way I can is to purchase a dedicated server. Here's the error:
iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Here's the fix: [URL] So, what I am hoping to do is configure this by just opening port 3128 directly, and only allowing access from our networks. As a test I did this and allowed only from our office and it did not work. However I can't connect, so I am wondering what I am doing wrong? Here's my squid configuration:
[Code]....
Is there a difference between using GPT partition table when formating hard drives and MS-DOS partition table? What are the advantages/disadvantages of using either?
View 2 Replies View RelatedWhat is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedI want to configure SSH key-based authentication and SSH password Authentication in same machine for different user .
View 1 Replies View RelatedOn Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
Under a Linux shell, how can I change the creation time of all a folder's files to the current time?
View 2 Replies View RelatedIf I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI need to make a choice on what authentication protocol I want to use for Authentication and Authorization. I was looking at Radius and then literature suggested that Diameter was a better protocol. Keep in mind I need this on a hetrogeneous setup ( linux & windows together). Diameter seemed like a good fit until I discovered that the open source code no longer seems to be maintained ( C/C++).
I was also looking at Kerberos as an option though there is alot overhead with the server. SSL/TLS or EAP? I am looking for simple but secure and am new at the security protocols.
I have a linux (Slackware) machine and the time/date is like, June 23rd 2003, 10:00am (It's 11 here) and I am not able to set the time to have it correct. I change the timezome to Montreal but the time is still wrong.
Is there a way to force it to sync with my domain controler or even another online NTP server?
I'm just wondering what the limits for time are. I have a program that always takes exactly 20 ms, so I assume this is the lowest it can measure, but I want to see if there's some sort of documentation of this.
View 3 Replies View RelatedMy computer has different time when booting to linux or Windows.How to make the time the same?My computer time is 10:57pm Apr 14 when booting to linux.My computer time is 2:57am Apr 14 when booting to Windows Vista Home Premimum SP2.Both OS are set to the same time zone (GMT-5. Eastern Time US & Canada).
View 5 Replies View Relatedget the values for the user time and system time for a process.i have tried getrusage to get values of ru_utime and ru_stimebut these don't seem to be correct
View 3 Replies View RelatedI have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.