OpenSUSE 11.1; kernel 2.6.31.12-0.2-default
Tried to configure via:
Zoom CD driver: 1.06_k2.6.22.17_01_default-1suse.i586.rpm
linuxant driver: dgcmodem-1.13_k2.6.31.5_0.1_pae-1suse.i586.rpm
[code]....
i'm trying to install zoom 3095 usb dial-up modem on my laptop which has ubuntu 9.10 on it but i got an error
Where is the linux source build directory that matches your running kernel?[lib/modules/2.6.31-21-generic/build]
Building modules for kernel 2.6.31-21-generic/build, using source directory lib/modules/2.6.31-21-generic/build. Please wait...
ERROR: Module build failed! Please examine the log file "/tmp/dgcconfig-buildlog.txt" to determine why.
dgcconfig-buildlog.txt said:
(cd /lib/modules/2.6.31-21-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.31-21-generic/build" "M=/usr/lib/dgcmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-21-generic'
[Code]....
working and installation of External usb modem , dialp , DEll d400 ( in vostro 1510 )
View 8 Replies View RelatedI have installed openSUSE 11.2 in my PC. To enable compiz I have download and installed (using OneClick) the nVidia driver for my nVidia GForce 8500GT video card.I need to enable the 'Enhanced Zoom' because I'm a low vision user and I need a magnifier better than Orca.The problem is that when i try to enable it (from ccsm) there isn't any zoom... I try to press META (or Super) and scroll with wheel (SUPER + Button 4) but nothing.
I have see that if I press Super+2 (increase zoom) the mouse pointer moves to a specific screen zone but the screen will not zoom.
I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
View 1 Replies View RelatedI recently got one of these modems and it had discovered very serious detection problems. I had been using one of the Cricket PCMCIA modems but it had a problem of dropping connections every 30 seconds or so. Anyway, this modem works a lot better but there is a trick to get it working.
Since the modem has a built-in flash card reader and flash memory containing the Windows software, when you first plug the device in, it is detected by the OS as a flash drive rather than a modem. If you try to configure the modem at this point, it will be impossible since no modem will have yet been detected.
In order to get the device to be detected as a modem, it needs to be "flipped". The following thread from the Ubuntu forums discusses the details of the problem and contains a link to a utility to "flip" the device: [ubuntu] HOWTO: Cricket Wireless A600 Broadband Modem - Ubuntu Forums
Once the device is flipped, I configured it using YAST / Network Devices / Modems. Mine is detected as /dev/tty/ACM0. I use Kinternet to connect, though Network Manager may also work, but I have not yet tested it.
I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies View RelatedI have Mandrake 7.1 installed on a laptop and I have several problems that an upgrade would likely fix or provide a path that will support a fix. The Mousepad is irratic and the PCMCIA WiFi and Ethernet cards are not recognized. What's a good way to upgrade? (I can access the network from an external modem and from a dual-boot Windows 98 WiFi)
View 7 Replies View RelatedSince I installed 11.1 and now 11.3 I haven't been abble to access my LaCie 500gb USB 2.0 external disk. So I asked LaCie support about it and they replied as follows:Windows 2k or SuSe Linux 11.0 can not see device in any USB 2.0 portsIs this a known problem and will it ever be fixed?
View 9 Replies View RelatedIf i want to use an external usb modem by which i can surf through the net, is this possible in fedora. Because the software is always an .exe file which is only compatible with wndows. let me know if i can use and also let me know the procedure for using this
View 1 Replies View RelatedI have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
View 9 Replies View Relatedi'm running suse 11.2 and using a ZTE mf627. thus far i can connect to the internet using usb_switcher/vwdial but i want to share it across a LAN. all the how-to's on connection sharing I've seen use the network manager/network settings, but the device doesn't show up in either
View 2 Replies View RelatedI'm trying a long time to configure my 3g modem to connect.I had tryied using the KDE Network manager and the modem stay in "Waiting authorization" for ever ^^.The KDE Network manager runs ok in Kubuntu.I had tryied download and install kppp, but kppp don't open my modem (/dev/ttyUSB01)Then how can I configure my modem?
View 1 Replies View RelatedI have a devolo MicroLink 56k Fun LAN modem, which I could configure in openSuse 11.2 as an DSL device. With 11.2 it worked fine. But it isn't possible in 11.3 to configure it, because I cannot set the dial up internet provider phone number for this DSL device.I also tried it to configure it as a modem, but then it used the /dev/modem device, which is the wrong device for this LAN modem.
View 3 Replies View RelatedI have a box with 1 ethernet card and Huawei E160 USB modem. So, I have configured eth0 interface with IP 192.168.1.1 and modem0 interface with dynamically assigned IP. Now, I'd like to share Internet from modem0 to eth0 and so to the rest of home local network.
I need your advice on how to do it. All the manuals I've read deal with two ethernet cards that have static IPs. It seems that YAST lacks the GUI for it, too. Also, I need the configuration to work even with no user logged in so I'm using ifup instead of NetworkManager.
I am using 11.4 gnome desktop on hp elitebook 8440w. I have a reliance netconnect plus usb modem. (ZTE AC 2726).
Initially it was recognized but didn't work. But now system is not recognizing it. What should i do. Please suggest.
I just changed my power settings so that my laptop would hibernate when I closed the lid... but now KDE Network Manager has decided that it will not allow itself to be enabled. I can get my ethernet connection working through YAST... but I *really* need the wireless to work as well... so can somebody *please* tell me why KNM is being so stupid, and how I can fix it? EDIT: I just realized that I should have put this in the Network subforum...
View 5 Replies View RelatedI ran into a problem that seems to be related to: [URL] with an HP Desktop. The desktop has a Intel 82567LM-3 on board gigabit ethernet adapter which on a fresh install of 11.3 would not operate properly. The e1000e driver was properly detected however on loading, the ethernet interface was never initialized. My solution was to get the latest e1000e driver from intel.com: Network Adapter Driver for PCI-E Gigabit Network Connections under Linux*
[Code].....
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I am running a 3-G wireless USB broadband modem, and connecting with Network Manager, but I keep getting disconnected when idle after 5-6 minutes. I am used to using Kinternet to connect with my 3-G wireless USB broadband modem, and setting it up in Yast / Network / Modems, but was not able to configure my modem there (for some mysterious reason) so ended up using Network Manager instead.
What's going on here regarding YAST being unable to configure my modem (even when Network Manger is disabled). But my main problem at this point is that my connection times out after about 6 minutes if I'm idle. This is a big problem for me because I type slow and frequently get disconnected while posting on message boards. Where are the idle time out settings are for Network Manager? I can't seem to find them.
I just loaded 11.2 & Kde 4.3. Installed both Kinternet and Kppp. My modem is a USR PCI HW modem 2976. Hardware Info shows it connected to /dev/ttyS4. I configured the modem with Yast as modem0. The user access box is checked for Kinternet Both Kppp and and Kinternet will dial out.
The connect response comes back from the ISP and either of the dialers will hang and the dial tone comes back. The firewall is showing modem0 in the External section. Nothing changes if I shut the firewall off.There's nothing in the dmesg I could find. Could this be a pppd permission problem?
My machine is running on a dual-boot Windows Vista/openSUSE 11.2 scenario. I have been trying to get my Huawei E1550 to work on Linux for the past few days trying numerous methods suggested in other forums from people with the same problem, but I have not produced any fruitful results.
Plugging in the USB modem results in Linux detecting it as a CD-ROM. I have installed usb_modeswitch in attempt to switch it to a modem, but Linux still fails to recognize it. Windows Device Manager and lsusb both give ProductID=1001 and VendorID=12d1 connected to USB1. I'm guessing since Windows detects the correct IDs, the Linux versions should also be correct. In any case, I ran usb_modeswitch with the Default IDs for /etc/usb_modeswitch.conf, which gave 0x1446 as the ProductID, not 0x1001. Upon running usb_modeswitch, the product ID could not be found so the program fails and quits asking if it's connected (and it is).
Just to test, I also ran wvdial which unsurprisingly did not detect the modem and could not send the init strings. All commands were done using root privileges. Also note that when after usb_modeswitch is run and upon plugging in the USB, NetworkManager pops up near the tray saying "attached" but still shows the device as a CD-ROM.
I have an external usb dial up modem. lsusb shows: Bus 001 Device 002: ID 2001:f10d D-Link Corp. [hex] Accent Communications Modem How do I set this up? It probably needs a driver, how do I check it, or better yet, can I get yast to tell me if it recognizes the modem or needs firmware? I know linux and dial up is like the seventh circle of hell. Just wondering if there was a snowball's chances of getting this working. Sorry if this is the wrong section to ask in. Seemed like as good as any when I checked.
View 9 Replies View RelatedI have a US Robotics serial modem, and I have smpppd enabled in system services, with wvdial and kppp installed. When I try to set the modem up using yast, I keep getting hung up by the different screens. First a screen that asks if I need to dial a number to get out. I have to dial 9, so I have that entered. Then a screen that asks for "country" and "provider."
When I try to enter anything, nothing shows in the boxes, so I go to a screen that asks for the phone number, provider, user name and password. When I enter those, it goes to a screen that wants "Connection Parameters", with default settings and the "buttons" at the bottom of the screen "muted," or flattened out, i.e. unusable. That makes it impossible for me to set the information as saved, so it's back to the beginning and sart over, with the same results over and over. How do I get the modem so it dials out?
I have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
I got a new cable modem so I could get rid of the one I've been leasing from the cable company. It is a Motorola sb6120. Everything is fine with the ISP, it's approved for operation on their network, the only hitch was I had to use my Windows laptop to run their activation software.
At any rate, with the new modem installed, I hop on my Linux box and go to work. I'm seeing some terrible delays in looking up names. When I look with firebug, all the dns lookups for new names are taking 15+ seconds. First I just think maybe the names aren't cached or something is weird for a minute and it will get better, but no. After several restarts and then a couple days persevering with the new cable modem, all DNS queries are still terribly slow (including zypper, mail client, web client).
Suddenly I remember an issue I was having with, I believe version 11.1 when I first installed it. For just the computer on my network with a fixed IP address, DNS resolution was slow like this and if I disabled IPv6 then all was well. I believe there was even a patch issued back then for gethostbyname() that was supposed to fix the issue? So, when I disable IPv6, DNS lookup is back to normal. The two Linux computers on my network had been working fine with IPv6 and the old modem, though, and the Windows box is still working fine even with the new modem.
I can disable IPv6 and make it fast again, but really why should I have to?
I'm trying to integrate sendmail and openLDAP together. I've followed the guide in O'Reilly's LDAP book and my lookups are good. I think my problem is virtual users. What I'm trying to accomplish is that if an email is sent to joe@host.tld and there is an entry in LDAP for joe then it'll be accepted. Right now, it'll only accept emails only for system users. Below is my sendmail.mc (most comments removed)
Code:
divert(-1)dnl
include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
VERSIONID(`setup for linux')dnl
OSTYPE(`linux')dnl
dnl ## I have a real one
define(`SMART_HOST', `my.smart.host')dnl
dnl #
define(`confDEF_USER_ID', ``8:12'')dnl
[Code]...
If I connect with a 3g modem or with wireless sometimes the resolving does not work. This happens on opensuse 11.2. nslookup and dig works but nor ping nor ssh nor any other network application does work If I modify the /etc/resolv.conf after connecting to a wireless network for example it does not work even the dns are known And more strange if the resolver works and I modify /etc/resolv.conf with known dns the resolver does not work anymore. BTW: the dns entry from the wireless is 192.168.1.1 and I do not have any idea how the wireless ap is configured... so it could be in this case that dns is not forwared only allowed to use 192.168.1.1 but the other case is a 3g modem which not even the propagated dns entries works in the bad case
View 9 Replies View Relatedkppp frozen in initializing modem.I wait for many second but no dialup, in configure panel set /dev/modem on modem , Query properly working , but when connect , in initializing modem kppp stoped.
View 1 Replies View Related
