OpenSUSE Install :: Installer Can't See Entire Drive?
Mar 26, 2011
I am installing openSUSE 11.4 on a Dell D620 on which I used to have Ubuntu/XP dual boot. I don't want Windows at all anymore and on the new openSUSE install I just want swap, root, and home partitions.The installation goes fine, but it says my drive is 465 GB not 500, I think what is not showing is my old Windows System partition. I can't see away from within openSUSE to increase the size of my home partition after the install either.With my limited linux skills I think the simplest solution would be to just format the whole drive then install openSUSE. I tried to do that with some XP CDs, but none of them will boot, they keep listing various errors. I tried putting the drive in an external holder to plug it into another computer and format it just using windows, but windows won't recognize it.Using some free live cd/USB I don't know about
Using some setting in the openSUSE installation menus I don't know aboutUsing windows or a windows CD (I can post the boot errors if needed)
View 1 Replies
ADVERTISEMENT
May 10, 2011
I would like to install the entire Ubuntu OS to my USB drive. I know persistence works with it fine, so it would be perfect for traveling and on the go operation. The only question that I have has to do with the booting of the OS. Normally, I know I would have to restart the computer and boot from the USB. Then I came across MojoPac, and I think it is a cool idea. It starts up once the USB is plugged in and there is no need to restart. Would it be possible for me to simply plug in the USB on a Windows PC and have Ubuntu run in a similar fashion?
View 8 Replies
View Related
Feb 7, 2010
I have a little experience using Ubuntu with VMWare Fusion on my Mac, but that is about it. My girlfriend is running Windows Vista on an HP Pavilion tx 2000 laptop and she has been having all sorts of trouble with it. Needless to say Windows is eating the computer from the inside out so I recommended that she use Ubuntu, which means that I have to set everything up for her... So my question is how do I go about reformatting the entire hard drive and installing Ubuntu (or another Linux based OS recommended)?
View 3 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Apr 28, 2010
Main reason I am using openSUSE currently is because my Windows system's went bad. I haven't been able to easily restore and will probably have to do clean windows install. I want to make sure my entire openSuse system (application/OS setting/etc) backup so I can easily restore of it fast. Since this type of back takes awhile, I would preferably like do this while I am still logged into SUSE. I am where to disk cloning thing like clonezilla, but looks like I would need turn of my system entirely to get this done.
Currently my SUSE root and home are in a partition with another NTFS partition on my hard drive. I really don't want to use 'dd' to clone the entire hard disk. I would much rather store of required partitions in other locations. Hopefully, there is easy to get this done without too much of effort and time.
View 6 Replies
View Related
May 5, 2010
I've got a somewhat anemic box, resource-wise, set up in the office where any authorized user plus a guest account can log on. Guest is tightly restricted, but we get a lot of people passing through who need one-time or occasional access - this isn't the big problem. What's causing me problems is that a user will log in, walk away or go to the john and the screen locks. Next user (or this one comes back) and winds up doing another login. At the end of a week or so, I may have a couple of dozen sessions listed when I ask for "users". Since some of these session contain open applications they eat up an awful lot of a marginal amount of available memory. How do I kill the entire session (as root) for a user? Gotta be simple but it's not obvious to me.
View 3 Replies
View Related
May 4, 2011
We are looking for a solution that allows us to restore a servers "identity" in the event of hardware failure...ie Name, IP address, dhcpd, named configs etc.
We have ISO images of the appliance images that contains all the software and stuff. There is no real data on these servers.
If we backup the entire ETC directory and perhaps the /var/lib can we simply restore that and get everything back?
What concerns me is how some versions of Suse use UUID for the network config and the mounts points.
View 9 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Sep 16, 2010
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies
View Related
Aug 29, 2010
I am trying to install opensuse 11.3 but the PC restarts itself before loading the installer dvd. When I run the installer dvd from 11.2 i can see all the files there, i click on auto run and it gives me an error msg saying cannot find autorun program also have a live gnome desktop cd and same problem, cant boot install media. This were both created on opensuse 11.2 using k3b for the first one and brasero for the second one. I have put both on an xp laptop and the installers start with no problem, both media check are fine, no error. On top of that I have some ubuntu dvd and some xp dvd, I have tried both on my pc and they boot fine, so its not a boot problem,
this ones were created on this same pc before I had opensuse, seems only cd or dvd created in opensuse fail, but it only fails when booting on my opensuse pc and work fine when I put them into xp laptop. I have been trying all day and I cant find any info on this problem. The only thing I can think of, that I have not tried is to try to burn a dvd using xp and try that one.
View 9 Replies
View Related
Jan 1, 2010
I started the openSUSE installer from Windows, but I do not want to install SUSE. How do I get back to Vista?Every time I get 'Booting OpenSUSE installer 11.2 (LOCAL)' and it prompts for the SUSE DVD. I tried inserting the DVD and selecting 'Abort' on the first opportunity but I never get to return to Windows
View 9 Replies
View Related
Apr 7, 2011
I tried to install suse 11.4 from live usb when it was installing, it said at one point that there is 0 b available on my disk. It's impossible because I had a partition with 15 GB of space devoted to this installation. My hard drive is 300GB,100mb for system reserved, about 50 + 214 for windows and the fourth partition is extended 35 GB. The extended 35 has 20 GB for FAT 32 and then 15 GB for the suse. And it said there is no room. pressed explore or something from the error message and then the whole computer froze. I had to reboot and the grub was ofc fcked up, nice. So, atm I am running from another live cd. When I tried to boot the openSUSE live usb the usb was ruined.. I don't know what had happened but it tried to load the live usb, it had it's cameleon ture and then error messages that said something about the usb being read only. So, do you have any ideas what might have happened, why did it say there is no room when there clearly was?
View 9 Replies
View Related
Jul 20, 2011
I have a Kingston DataTraveler 112 8GB USB drive, and when i load openSUSE on it and slap it into my laptop (that is running Fedora 15 with no problems), i get this:
Code:
SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found
boot: _
I have tried the 4.7 GB DVD image, and the KDE Live CD, and both shows this. Also i tried UNetBootIn (is that what it's called?) and it's the same too.
View 9 Replies
View Related
Apr 13, 2010
I have installed many Linux distributions, but I have never tried openSUSE! So I thought it must be time to try it. I pop the dvd in(I checked the md5 of the iso and checked on the bootable disk) and when I go to install it pauses on the "Probe hard disks"Things I have done:
- Re-checking the integrity of the disk and iso.
- Tried booting with the safe kernel.
- Tried leaving it for ages
View 9 Replies
View Related
Jul 4, 2010
I have 2 physical 500 GB Sata drives/stripes that appear as 1000 GB C: drive under WinXP. I have partitioned that drive into 750 GB Windows native C: and an empty 250 GB partition F:
When running the installer for OpenSuse 11.2 only the physical drives appear in the list of available hard drives 2x 500 GB (= sda and sdb), rather then the partitions of 750 and 250 GB (would expect sda1 and sda2). Is it possible to install Opensuse on the 250 GB partition (F: under windows) without destroying the WinXP installation and data on the C: partition?
View 9 Replies
View Related
Jun 4, 2011
I am in possession of a new HP HPE-570f PC which I bought this morning. This has AMD Phenon 1090T and AMD Radeon HD 6770 graphics card. The OEM Windows 7 works fine. When I try to install Suse 11.4 using same DVD that works on my other (older) machine, I see the Suse Installation screen from which I select "installation", then comes the "Loading Linux Kernel" progress bar. As soon as the progress bar gets to the end, the computer reboots! Then of course I end up back at the Installation screen since the DVD is still in the drive.
View 9 Replies
View Related
May 19, 2009
is their a wubi like installer so i can try open suse without partitions?
View 5 Replies
View Related
Mar 14, 2010
I was messing around couple linux distros and a desktop earlier today. When I booted from the Ubuntu disk, it seemed to take like 2-5 minutes on each screen. So was basically taking like 10 minutes before I even got to the disk's menu. When i booted the machine off of openSUSE 11.2 disk it booted nice and fast, then installed without a hitch.When i put the Ubuntu disk into my laptop it booted fast and fine there.I'm just curious if anyone has any ideas why that desktop would seem to disagree with a bootable Ubuntu disk like that. Those things are obviously designed to work with near anything. It's a standard IDE CD-ROM, 7600GT, IDE hard drive, all pretty standard stuff.
View 2 Replies
View Related
Jul 23, 2010
I'm trying to set up a PXE Boot Installer for Linux. The problem I'm having right now is that our standard repo that was have set up [URL] doesn't seem to be working as an install point (I keep getting "no repository found"), even though it works great as a means for a software repo (Its used by several hundred other servers). Is there a difference between a software repository and an installation repository?
View 1 Replies
View Related
Nov 23, 2010
I've tried to install opensuse in a dual boot with xp. I've got an extended partition with root home and swap and primary partitions for xp and boot. The installation freezes at 92% while installing the bootloader, I've tried installing from cd and from usb, with or without boot partition and nothing changed.
View 3 Replies
View Related
Dec 23, 2010
I tried to install 11.3 today but no luck so far. I installed it 3 times from GNOME liveCD and once from a LiveUSB both didn't work. With the CD, it restarts before installing initrd, GRUB tells me :
error 15 : file not found.
I verified both the image I downloaded via md5 and the CD I made and they both are OK.
View 9 Replies
View Related
Apr 3, 2011
I have an ASUS N82 model notebook with Windows 7 and an ATI Mobility Radeon HD 4670 GPU. I downloaded the openSUSE-11.4-DVD-x86_64.iso file and tried to run it from my desktop using Daemon Tools LITE software. The install program for the installer started up and let me progress all the way to the final screen at which point it starts extracting files and then I almost immediately get this error message: "Cannot exec bcdedit.exe"
I have done everything I know to do to make sure that I am signed in and running the install as an administrator. I even ran the command prompt as an administrator to make sure that I could run bcdedit.exe myself and it ran fine.
View 7 Replies
View Related
Apr 25, 2011
I'm trying to solve a kernel bug discussed in /show_bug.cgi?id=24002. One clue is that the problem does not occur when the kernel used by the installer for 11.4 is booted. Can any one tell me how to strip down the vanilla kernel to produce the installer kernel? Perhaps if I can strip down the vanilla kernel one step at a time then I can find the bug.
View 4 Replies
View Related
Nov 4, 2010
I have spent considerable time installing and getting my Ubuntu 10.04 LTS (Lucid Lynx) to where I want it. I am looking for something that would BackUp my entire hard drive to a CD/DVD (preferably bootable) --so-- if I crash -or- want to clone to another hard drive I would have the ability to a 'Restore' of the CD/DVD and simply be able to load the CD/DVD to an old / new hard drive and be back-in-business without a lot of hassle.
View 4 Replies
View Related
Jul 19, 2011
I have a hard drive with 10 partitions, 4 primary, 6 locgical. I would like to share the entire hard drive via a file server. The har drive is a seprate disk from my main operating system hard drive. I think that means I cant use links? How can I set this up?
View 3 Replies
View Related
Jul 11, 2011
i am putting a larger drive in my laptop, i have linux mint 10 KDE setup with all the software i need and running just the way i like it. is it possible to actually copy the entire partition to a external drive then place the partition back into my laptop with the new drive in it, and still have it all setup the way i had it?
basically so i dont have to reinstall everything and set it up again.if this is possible could you please explain how i can do it in the simpliest terms at all please.
View 6 Replies
View Related
Dec 19, 2009
Trying to install SUSE on a perfectly working PC that was running Windows. Blew away all the partitions and formated the drives.When trying to install SUSE, Installer will not detect my two hard disks. Tried with version 10.x, 11.1 and 11.2, without success.My Mobo is a XFX GeForce 8209, and my SATA drives are both Seagates (1x120GB, 1x320GB). I've tried different SATA mode selection (i.e. SATA, AHCI, and RAID) without any success either.I've tried to look for SATA controller drivers for my Mobo, to try to load on Installer startup, but failed there too.
View 1 Replies
View Related
Jul 19, 2010
OpenSUSE 11.3 x86_64 Live USB disk only one HDD with OpenSUSE as the only OS.the HDD is fine so i know it is not a hardware problem.this is different from my other (grub) problem as this is a different PC.the installer has been stuck for over an hour at 92%/Saving Bootloader configuration.maybe i can try the installer in text mode to get more info? is there a text mode for the installer?
View 9 Replies
View Related
Mar 21, 2011
In short. I've cracked open the initrd file of the openSuSE installer to have a look - I've determined it's an initramfs which by default would execute ''/init''GREAT! But not so much... init should find the installation files et cetera - but I haven't a clue how it does this because it's a compiled binary So, my question is this - do anyone know where I can find the source for this file ?
If not, who should I contact to find it? I really, really need to look at it.. I'm trying to throw the installer over to a USB harddrive (with multiple other installers, each in their own directory etc. etc.) - the idea is to create a USB HDD with installation mediums for the OS's I use so the recommended methods of dedicating a partition to openSuSE is not going to work...
View 3 Replies
View Related
Aug 15, 2010
I'm using Ubuntu Lucid as the host OS and Windows XP SP3 as the guest one. Is it possible to share an entire hard drive with the guest OS?
View 2 Replies
View Related
