OpenSUSE Install :: Can't Format - "Disk In Use, Cannot Add Partition"
Mar 31, 2010
I'm new to linux and this is my first post. I have two SATA hard disks of 160 GB each. I have windows 7 on one of the disks and the other one is left empty (Unused). When I tried to install open SUSE 11.2, I select the expert partioner. I could see the disks as,
and not as /dev/sda or /dev/sdb. Under the disks section, i could see sda and sdb. But when i tried to select sdb and try to add a new partition, I get a message, "Disk in use, cannot add partition" .I want to install SUSE on the unused disk.
Configuration:
motherboard: asus p5n e sli
grapics: nvidia quadro 540
cpu: intel core 2 duo
hard disks: Seagate 160GB x 2
View 9 Replies
ADVERTISEMENT
Feb 23, 2011
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
View 9 Replies
View Related
Mar 27, 2010
I was recently forced to do a reinstall of OpenSUSE. As part of that I backed up the folders I needed to keep. The installation however didn't format the 'Home' partition though. At first I thought it was nice, but I've run into trouble with a program I most definately need to get working. So my plan is to re-install yet again.
how to make the install format the root partition I think it is, and the 'home' partition, so I can start fresh.
To further complicate things My laptop (which this is happening on) is dual booting between OpenSUSE and Windows 7. It is VERY important that the windows partitions remain.
View 9 Replies
View Related
Aug 27, 2011
I was copying a file to my pendrive it was taking a very log time which was ridiculous so I cancelled it but when I reboot my sysem next time my root drive became almost full (20gb partition, 12gb was free before. now its only 3 gb is free) also my pendrive is dead in linux in window it says you have to format the pendrive before use it when I click on format, format stops and says you don't have permission. also Now I cannot write anything on my winodws c or d drive because of permission.
View 4 Replies
View Related
Sep 6, 2010
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies
View Related
Dec 4, 2010
A part of my hd is ntfs (where I keep my windows and windows files). I edited it to be flagged as "bootable" in the disk tools that comes with ubuntu 10.10, and now it wont list as a file system in ubuntu (in other words I cant access it).
View 4 Replies
View Related
Jul 18, 2011
I got a new hard drive 2TB for extending the storage. I am working on fedora15 and would like to format the disk as a linux partition and external hard drive. me how to format this disk and partitioning!
View 12 Replies
View Related
May 20, 2011
This is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
View 2 Replies
View Related
Sep 8, 2010
Just ran into a problem involving mdadm, a disk which had been in a raid array, and an attempt to reformat. Basically, I went to reformat some partitions which had been in raid, and one of them threw the error andy@andy-desktop:~$ sudo mkfs.ext3 /dev/sdb5 mke2fs 1.41.11 (14-Mar-2010) /dev/sdb5 is apparently in use by the system; will not make a filesystem here! An attempt to umount revealed it was not mounted. lvdisplay and fuser did not reveal anything to me, so I just started looking around. I was graphically navigating /dev and noticed a /dev/md_d0 which did not look like /dev/md_d1 etc (it was missing a little arrow). I had not seen this notation before (my raid was md0), but figured it couldn't hurt to try stopping it.
andy@andy-desktop:~$ sudo mdadm --detail /dev/md_d0
mdadm: md device /dev/md_d0 does not appear to be active.
andy@andy-desktop:~$ sudo mdadm --stop /dev/md_d0
mdadm: stopped /dev/md_d0
After this, the partition formatted fine! I saw a lot of instructions including zeroing the partition and removing a logical volume, but the above was the only thing which worked for me! Just posted it in case it helps someone else. I know I've not been terribly technical!
View 2 Replies
View Related
Mar 13, 2011
HP 6930 laptop
120GB HDD
It had Win7 64bit installed across the whole drive (100MB sys reserved and C: taking up the rest), I was successfully able to shrink the C: partition to 60GB. So I know have a working copy of Windows 7 on 60GB with 60GB or free space. I boot to 11.4, the installer works great so far and is real fast, I get to the spot where I choose my partitions for nix(tried both auto and manual) then I click OK at the warning to start writing to the disk and ....error 1007, the installer is unable to create the partitions.
View 5 Replies
View Related
Aug 28, 2010
I have a 250 GB external disk, where there was store a hundred and something GB of data. Pictures, music, documents and TV-shows. It was FAT32. In an attemt to make an live USB drive with openSUSE, I did exactly what I shoulden't do: I mistook the external disk for the the USB drive. Now the external disk has a 700 mb linux partition, while 232.2 GB is unpartitioned. TestDisk from CGSecurity is looking to see if there is a lost partition table there, somewhere. Is there anything I can do? There was no formating, so the data is still there (except for those 650 mb that was overwritten). Is there any way to rebuild the old partition?
Output from "fdisk -l":
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
64 heads, 32 sectors/track, 238475 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[code]....
View 9 Replies
View Related
Mar 17, 2011
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
View 9 Replies
View Related
May 27, 2011
I have been using a kubuntu 10.10 till last week when it could not complete do-release-upgrade, so I downloaded kubuntu 11.04, specifying that I did not want my /home partition to be formatted, and went ahead with the installation. I used ext4 under 10.10 and selected ext4 again for 11.04, yet when I first rebooted after the completion of the installation, I could not find any of my files in that partition (except a newly created user home folder with the same user name as the old one). But when I looked at du -h, it's 92% full. I know I have set the mount point correctly, so it shouldn't be a fstab problem. What I should do to recover the files?
View 6 Replies
View Related
Apr 25, 2010
When using the Yast partitioner to partition a USB stick, I noticed there was no option for the ntfs format, but has the fat option. Is this a missing functionality/lib or by design? I have all of the ntfs stuff installed. I used to use gparted for this, but decided to make my self use the Yast tools. I like to keep them in ntfs format to get around the 4GB data transfer limit and have them readable by Linux and Windows.
View 9 Replies
View Related
Sep 1, 2011
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
View 9 Replies
View Related
Jan 18, 2010
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
View 1 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
May 11, 2010
I need to change my LUKS partition to NTFS as I do not need the boot partition any longer, but I need to keep sdb3 (truecrypted ext3) intact. This is how the disk looks now:
Code:
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Sep 27, 2010
I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies
View Related
Aug 7, 2010
I currently run a dual boot with Windows Vista and Ubuntu Lucid. I have been using Ubuntu for quite a while now, but kept around Windows "just in case." I have decided that keeping Windows is unnecessary and my Ubuntu partition is running out of space. I was wondering how I could format the Windows partition and add that space to the Ubuntu partition without having to format my entire computer.
View 2 Replies
View Related
Mar 10, 2013
I have tried to install Debian from various .iso files over the last couple of days. However, the installations always get stuck on "Partition disks" section. On the screen, the progress bar for "Starting up the partitioner" keep getting stuck at 50%, and refuses to progress further. I understand that it might take a little time to scan the hard drive, so as an experiment, I left it on over night. However, it is still stuck there when I woke up 6 hours later.
View 8 Replies
View Related
May 7, 2010
had 9.04 install on a dual proc home built system that was running fine until a recent update wiped out grub. Since I have all my data backed up, I decided just to install 10.04. I select Use Entire Disk but when Ubuntu tries to install, I get this error:The ext4 file system creation in partition #1 of Serial ATA nvidia_dacaecb (mirror) failed.
View 7 Replies
View Related
Feb 16, 2010
I just installed Ubuntu on my laptop (x200s, XPpro with 230 Gb), and created a 30Gb partition therefore. At the end of the install, the screen remained orange for a while, without any disk activity. I forced the laptot to reboot, but Ubntu was no option when the machine restarted. However, my XP partition has been reduced by 30 Gb. Does anybody have an idea about what I should do to either get Ubuntu installed or recover the disk space?
View 3 Replies
View Related
Apr 10, 2010
I have a pretty weird problem, which is that I can't format any partitions anymore.
It started when my laptop suddenly froze and I killed it (I just ran FF, IRC client, Kopete, ... and I think the last thing I did was plugging in a USB drive). When I wanted to boot the machine again it gave me a lot of errors that the root and the home partitions are both corrupted.
Repairing the system with the DVD didn't help at all and finally I removed all the partitions to reinstall the whole system.
During the installation it can create the partitions, but it can't format them with ext4.
I tried to format the partitions with a live CD and YaST Partioner and the same problem showed up code...
View 9 Replies
View Related
May 20, 2010
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
View 2 Replies
View Related
Oct 9, 2010
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
View 9 Replies
View Related
Apr 3, 2011
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies
View Related
May 20, 2010
I have been dual-booting Vista and openSUSE 11.2 until my SUSE install is fully functional and now and I want rid of Vista and to reclaim the space for Linux.
Code:
fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x28000000
[Code].....
sda2 and sda3 are the Vista partitions. sda2 is a recovery partition and sda3 is the main partition. All data is safely copied from sda3 and now I want to reformat them for SUSE. I not bothered about partition resizing i.e. I am happy to just have the sda2/sda3 space available to SUSE and mount them somewhere.
1) Do I need to do anything about the boot table first or can I just reformat sda2 & sda3?
2) How should I format sda2/sda3? I'm guessing I need to unmount them and then format. Should I use ext4 or something else? Which command/tool should I use?
View 9 Replies
View Related
Sep 27, 2010
I was installing opensuse on the c partition and it gave errors so i aborted it now i click on windows and it says invalid or unsupported executable format chainloader +1 so then i proceeded to try and fix this by changing the menu.lst to this:
And now it tells me that disk isnt found so i need to know what to put in the menu.lst to load the actual windows partition and then fix the original error.
View 9 Replies
View Related
Oct 10, 2010
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
View 1 Replies
View Related