OpenSUSE Install :: Another Dual-boot \ Drives 1 And 2 Are Striped Together?

Feb 16, 2011

I have 3 separate hard drives. Drives 1 and 2 are striped together and I have openSUSE 11.3 installed. On the third disk I have WindowsXP-64 Professional. I installed SUSE first with the third disk unplugged. I then installed WinXP with the two SUSE disks unplugged. My fdisk -l is:

Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

View 1 Replies


ADVERTISEMENT

OpenSUSE Install :: Dual Boot Windows 7 / 11.3 Using Separate Hard-drives For Each OS?

Oct 7, 2010

We were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).

Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).

W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.

There are plenty of postings re integrating W7 to the Grub-menu.

This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.

Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows

So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.

View 7 Replies View Related

OpenSUSE Install :: Desktop Won't Start I Get An Green Striped Screen / Sort It?

Jul 26, 2011

I have installed Opensuse 11.4 and the desktop won't start i get an green striped screen, i have tried to run yast but it seems mine NVIDIA isn't correct installed.

I have an NVidia SE6150 Graphic Card and i have tried to configure the startup parameter vga=0x317, i have changed this to vga=0 to get vesa mode but that doesn't work, i have an wide screen monitor that supports 24 bit and 1360x768.

View 4 Replies View Related

Ubuntu :: Dual Boot 2 *seperate* Drives \ Several 1.5TB+ Drives, And One Of Them Is Not Being Used?

May 1, 2011

I've used it once before but got fed up with the boot asking me everytime I turned my laptop on because I wasn't using it enough. I have Windows 7 on drive C . I want to keep it on drive C. I have several 1.5TB+ drives, and one of them is not being used. I want to dedicate it to Ubuntu, and be able to do a dual boot with my Windows 7 install. Is this possible? If it is, what about when this drive is not connected to my laptop? Will that mess up the boot process?

View 2 Replies View Related

Ubuntu Installation :: Boot Sequence With Dual Boot And Two Drives?

Dec 10, 2010

recently sent up another computer as follows:Two sata drives. Windows 7 was installed on the first drive(sda)and booted successfully. This drive was disconnected ( I have had some installs where Unbuntu wipes out the existing C drive eventhough I am installing to D) and Ubuntu was installed to the second drive (sdb). At one point I had to rebuild the grup on the Ubuntu drive and was careful to make it installed on the Ubuntu drive. To my surprise when the PC booted up I saw the Grub menu with a menu entry for Windows. The Windows drive was always the primary drive before the Ubuntu install. I was planning on the Windows drive being the boot drive and using a boot manager to determine where to go from there. If I utilize the BIOS boot option (F12) I can boot each drive individually. I cannot in BIOS set a particular drive to boot - just a hard drive. Everything is working I am just curious why the primary drive does not boot first. IN BIOS the Windows drive is a primary SATA with a lower number that the Ubuntu drive which is listed as a secondary drive.

View 4 Replies View Related

Ubuntu Installation :: Unable To Boot From Either Dual Boot Drives

Feb 15, 2011

I can only use the Live CD to operate Ubuntu. After typing in the command sudo fdisk -l, I get the following?

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[Code]....

And when I boot without the Live CD, I get the following message in the GNU GRUB Version 1.98-1ubuntu7 window page.

View 9 Replies View Related

Red Hat / Fedora :: Dual Boot From Different Drives?

Jul 15, 2010

I have a Dell Dimension 3000, pretty boring. I've got 3 hard drives installed. One drive (C) has XP loaded onto it, one drive has Fedora 13, and one drive has all of my media and photography work on it.

I installed Fedora to play around with Linux, but now after a while, I've decided that I want to use it as my default OS. I haven't booted into Windows in who knows how long. The problem is, that when I boot the computer, it defaults to XP. The only way to get into Fedora is to press F12 at the proper time to select which drive I want to boot from. This is a hassle at times, because I have a tendency to forget and not hit F12 quick enough and have to start over.

Unfortunately, I'm not sure which bootloader I'm using, however I believe it is the XP boot.ini file, if I'm explaining this right. I tried modifying the boot.ini file in XP, but it seems as though the instructions I got are only when the two OS' are on the same drive in different partitions.

Want to make linux default OS in a dual boot system on 2 seperate hard drives

View 7 Replies View Related

OpenSUSE Install :: Dual Boot 11.2 / Doesn't Boot From Win7

Feb 14, 2010

I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting

View 4 Replies View Related

OpenSUSE Install :: Can't Boot Into SuSE (Dual Boot With Win7)?

May 26, 2011

I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.

So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4

After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:

1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.

2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link

[Code]...

View 4 Replies View Related

CentOS 5 :: Dual Boot 5.4 And Windows XP From Different Drives

Mar 18, 2010

I have Windows XP installed. And I also plan to install CentOS 5.4.I have two hard drives. Hitachi 500 GB and WD 500 GB.Windows XP is intalled on first drive And I plan to install Linux on Second drive. And since i find some contradicting and not understood by me posts. I have to be sure what to do. I can install Linux, then i can edit grub. and add there something like:

title Windows
map (hd0) (hd1)
map (hd1) (hd0)
root (hd1,0)
chainloader +1

When its on one drive as I understand it will definately work. But if its on 2 different drives. There is a problem that windows doesn't boot from secondary drive. So I find this article witch i cannot understand. Do i have to understand it? Or its wrong and bad decision.

[URL]

I have no RAID.After all what is step by step process of creating bootable CentOS and Windows situated on different hard drives drives?

View 19 Replies View Related

Ubuntu Installation :: Dual-boot Using Two Hard Drives?

May 1, 2010

this may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.

Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?

View 1 Replies View Related

Ubuntu Installation :: Dual Boot Across 2 Hard Drives?

May 4, 2010

I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup

View 9 Replies View Related

Ubuntu :: Dual Boot - Cannot Find Windows Drives From 1.04

Jul 3, 2010

I have installed winxp & ubuntu 10.04. But i cannot find my windows drives from ubuntu 1.04. how can i watch my windows drives from ubuntu 10.04

View 3 Replies View Related

Ubuntu :: Replacing XP With Dual Boot On Old Desktops W/ 2 IDE Drives?

Oct 18, 2010

We're trying to replace XP with a XP/Ubuntu dual boot on a bunch of old desktops (P4, 512MB RAM) and IDE drives. Unfortunately I'm not old enough for experience with IDE drives and the whole master/slave thing

I do not want to install Ubuntu on same disk as XP and use GRUB because the transition needs to be seamless with as little margin for error as possible and enabling the users to boot into either OS on a separate disk So I've decided to plug in another old IDE HDD into each desktop and install Ubuntu on that. Each desktop is equipped with a Cable Select cable with clear Master and Slave labelling.

So what should I do w/ regards to the Jumper settings? What about bootloader? Should it go into the slave Ubuntu disk? Can Ubuntu be made master and then offload the booting to XP through GRUB somehow (whilst leaving XP's disks untouched)?

View 9 Replies View Related

Ubuntu Installation :: How To Dual Boot 11.04 And Win 7 On Separate Drives

Jun 4, 2011

I have Ubuntu 11.04 on 1TB HDD and Win 7 on another 1TB HDD. Right now I have to unplug a SATA cable to get to boot into one or the other. What is the best way to be able to pick. I don't care which OS I do it in or which is the primary, if there has to be one. I have an MSI mobo.

View 2 Replies View Related

Ubuntu Installation :: How To Partition Drives For A Dual-boot

Aug 9, 2011

I've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:

1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB

The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?

View 7 Replies View Related

OpenSUSE Install :: Uninstall / Remove OpenSUSE On Dual Boot System

Sep 5, 2010

I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?

View 7 Replies View Related

OpenSUSE Install :: KDE Too Slow On Start Up. OpenSUSE-WindowsXP Dual Boot?

Jul 18, 2011

I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.

After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.

My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?

Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.

View 9 Replies View Related

OpenSUSE Install :: Clean Install 11.4 Dual Boot System Grub Error?

Apr 27, 2011

I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6

I continued with the install and then got:

Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit

View 9 Replies View Related

OpenSUSE Install :: Dual Boot Query - Install 11.3 Along Side Distro?

Jul 21, 2010

It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.

View 9 Replies View Related

Ubuntu :: 10.04 / Vista Dual Boot Setup With 3 Hard Drives?

May 23, 2010

I have 3 hard drives: one with vista installed on it working fine, one with 10.04 installed on it and working fine and the last is just a media storage drive. Currently I have been unplugging the windows or ubuntu drive depending on which OS I want to boot. What do I need to do so that I don't have to physically disconnect the drives and can just pick which OS to boot on power up?

View 3 Replies View Related

Ubuntu Installation :: Dual Boot 10.10 And Windows 7 On Seperate Drives?

Mar 8, 2011

I am trying to install ubuntu 10.10 and windows 7 on my hard drive. I want to install both the OS on seperate drives. can anyone tell how to do it? I know that there are screenshots on ubunutu site itself but i am new to ubuntu and I am unable to follow instructions.

I first installed ubuntu 10.10 in dec 2010 using my ubuntu dvd. Now I am reinstalling it again but the setup screens have changed? hows that possible? i mean its the same disk. does anyone know why? or am i drunk.

View 4 Replies View Related

Ubuntu Installation :: Dual Boot Problems With X2 Sata Drives?

Apr 14, 2011

I have recently built a new system which has two internal sata drives. The plan was to install windows 7 one drive and ubuntu 10.10 on the second drive for KVM hosts. I started with the windows install which completed, then I went forward and installed ubuntu 10.10 64bit to my second drive (sdb). During the installation I chose to manually partition my drive. i partitoned the drive (sdb) as follows

/boot - 1gb
/ 40gb
swap 16gb
extended partion of 400gb

I then selected sdb to hold the boot record, as it was set by default to sda (my windows drive). The OS installed fine. I then went to reboot my system so go back into windows, by selecting the first drive in the bios. Once selected the system keeps booting into Ubuntu, no matter which drive I select. Now I checked the grub.cfg file and i see all references to hd1 there is no reference for windows found. I then proceeded to do 'sudo update grub2' this did not pickup any reference to my windows droive to add to the grub menu. When i select the ubuntu drive to boot fom my bios, i get no grub menu appaer it just boots quite happily into ubuntu. Can anyone please provide any resoloution to this, I can provide additonal outputs regarding my partion tables etc. later this evening when I get back from work.

View 9 Replies View Related

Ubuntu Installation :: Combine 2 Drives, 2 OS' Into 1 Dual Boot System?

Jun 8, 2011

Is it possible to create a dual boot system from two separate disk drives each having been created as a single boot computer? I have an 80gb disk drive with Windows XP installed on it. I have a 160gb disk drive with Ubuntu 11 installed on it.

I have installed the Windows disk drive as drive 0 and the Ubuntu disk drive as drive 1 in my computer. Each disk drive was set with cable select pin settings. The computer boots to windows. If at all possible, how would I go about setting up the system to dual boot to both windows and Ubuntu? I have attached screen shots of part -l, gparted 80gb disk and gparted 160gb disk.

View 4 Replies View Related

Installation :: Dual Boot Menu Setup 2 Hard Drives?

Jun 17, 2010

I need a suggestion on setting up a dual boot menu for my setup. I have two hard drives one with WinXP and a second one with CentOS 5.3 installed. I basically moved the hard drive from another identical machine to this one and so I want to setup a boot menu to access either windows or Linux. CentOS already has grub on it.

What is the simplest method of setting up the dual boot menu? I would like something which is easy to administer which I can just ghost over either the Linux drive or Windows drive or disconnect either and have either boot just fine. I don't ask for much do I?

If I have to go through a little process after ghosting over one or the other drives that would probably be ok. We get updated images for this machine and replace the image on the drives with new images, although Linux shouldn't be reimaged, just windows. So the Linux drive (2nd drive) should not be touched normally.

View 9 Replies View Related

Hardware :: Dual Boot With Dos Absolute Two Seperate Hard Drives?

Jun 25, 2010

Ok so first off my hardware Asrock 775dual-vsta Master and Slave hard drives on primary IDE Absolute Linux 2.6.33.3 ; Dos 7.1 (yes Dos 7.1 by itself no windows whatsoever) Absolute Linux=sda1 ; Dos=sdb1

Ok so I can't boot into dos from lilo boot menu. It boots fine however if I tell the bios to boot from the second HDD first (DOS). But it's inconvenient to tell the bios every time on power-up to choose the second hard drive as the first boot device. Here is my lilo.conf boot section

# Linux bootable partition config begins
image = /boot/bzImage
initrd = /boot/initrd.gz
root = /dev/sda1

[Code]...

Either way when I boot from the first hard drive (linux hard drive) and lilo pops up, I select dos and hit enter then nothing... It just sits there and ctrl-alt-delete can't reboot my comp as it's frozen.

I don't wanna have to tell the bios to select my dos hard drive as my primary boot device everytime I wanna boot dos. I wan't my linux hard drive to be my primary boot device and have my dos hard drive selectable from the lilo boot menu. Why can't I do that? What am I doing wrong? I thought this was easier than dual booting from a single hard drive?

View 5 Replies View Related

General :: Bootloader, Dual-boot With Win7, And Large Drives?

Aug 15, 2010

I just tried to install OpenSUSE 11.3 on sda4 which is approximately the 2nd half of a 1TB drive, with a pre-existing Win7 installation on the 1st half. The installation summary (before it made any changes) told me "The bootloader is installed on a partition that does not lie entirely below 128GB. The system might not boot." Naturally, not keen on having a computer that won't boot, I aborted the installation.

Of course it's not below 128GB -- Windows is there.

Is there a workaround that is straightforward enough for someone who has very limited experience with GNU/Linux and isn't a comp-sci student?

View 10 Replies View Related

General :: Dual Boot Windows 7 And Ubuntu Using 2 Different Hard Drives?

Nov 23, 2010

I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.

Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.

I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?

View 3 Replies View Related

Slackware :: Dual-boot With Separate Hard Drives And Lilo?

Dec 16, 2010

After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?

View 5 Replies View Related

OpenSUSE Install :: Dual Boot With W7 & OS 11.2?

Feb 27, 2010

I recently built a new rig and wanted to make it dual boot with W7 & OS 11.2. I installed W7 and partitioned my drive with 30 gigs I anticipated using for the 11.2 install. OpenSuse will not recognize it or allow any changes to that hard drive.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved