I have just done a fresh install of OpenSuse 11.2 over 11.1 (and I love it). Grub has the options of booting into Opensuse and windows but has missed Mint.It normally wouldn't bother me, but I use Mint for a few things I can't get working in Suse.
I was just wanting to manually add Mint to the Grub menue.I would like it to be added to the Suse grub as I prefer the look of it to the Mint grub.
Trying to add a section in grub to boot a Ubuntu 10.10 from a partition, and can enter all the info OK, but it won't save it. It has an issue with the kernel and ram files not being where configured, but I tell it to save them anyway. When I go back in the section hasn't been saved...??
Have tried in YAST (cli) and Yast2 - same result.
I just installed OpenSuse 11.1 alongside of Ubuntu 9.10. After finishing up the installation I find that I can't get into Ubuntu. I have tried adding Ubuntu to the OpenSuse /boo/grub/menu.lst but it doesn't seem to be working.
View 9 Replies View RelatedSo I installed SUSE 11.1 a few weeks back with two SATA drives andit's been working great. I recently received another SATA drive and wanted to add the space to my /home directory. I installed the drive and then booted up my computer. It goes through BIOS and POST just fine but when I get to GRUB my computer just hangs there. It doesn't throw any errors, it just sits until I hard reboot it. If I disconnect the extra SATA drive and then try to boot again everything starts successfully. I've done a little bit of searchingbut couldn't find much on this problem.pretty new to linux so I could definitely be missing something. Let me know if more details are needed.
View 9 Replies View RelatedWhen I first installed the openSUSE, I had to extract whole iso to sda4, because there was some kind of with CD (scratched or something like that), Now I want to add this part to grub, so that when I want to reinstall it, it will be ready for me. I tried doing this with yast, but could't figure out whole thing.
My current setup:
kernel image: (hd0,4)/boot/i386/vmlinuz-xen
initial ram disk : (hd0,4)/boot/initrd-xen
root-device:/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4
vga-mod:1024x768, 24 bits (mode 0x318)
optional parameters: resume=/dev/disk/by-id/ata-TOSHIBA_MK8032GAX_76HE0769T-part4 splash=silent quiet showopts
This tries to do it, but gives error while trying to boot.
With the generous help from caf4926 and please_try_again, i was able to boot into Ubuntu 9.10 with suse's grub legacy.Now I have another problem that i'd need help on, I added a new IDE hard drive for storage and it became sda and the original sda with 3 OSes changed to sdb. Grub can't boot into any OSes except windows 7. Well, i can still boot into Ubuntu if i change the boot option from
Code:
root=/dev/sda2 ro quiet splash
to
[code]...
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I am newbie to linux so please understand. My boot loader was overwritten by windows 7. so I inserted the boot cd and repaired the boot using YAST. now I am able to login to suse but when I select windows it says bootmgr missing. I read thru some of the board and added the following lines to menu.1st:
###Windows 7
title Windows 7
rootnoverify (hd0,1)
chainloader +1
linux-d8a4:~ # fdisk -l
[Code]...
I want to upgrade to 11.2 from 10.3. I was looking at disk usage and noticed the last time I set up my system, I allocated too much space to the / partition. It's only 50% used, while /home is 83% used. Rather than resizing and messing up /home, I thought about just adding a new partition created from the / partition. Call it say /data or something and put music, pics, pdf files and such there. But, would it be automatically mounted and what about permissions?
View 9 Replies View RelatedI want to add a 2nd NIC to an existing install of 11.2 acting as a LAMP server to so that I can add an internal zone for firewall reasons. Will it just find the card when I start the computer?
View 3 Replies View RelatedI've opensuse 11.2 installed and running. I have separate mount points for /, home, srv. I have two physical HDs of total 160gb in my system. Now my / partition is nearly full 91-93%. I'm thinking of adding another HD. I cannot figure out how to transfer data after installing the new drive. I plan to move /srv and /home from the main physical disk to the new disk and then add the space freed from under /srv and /home to the / partition. I understand the procedure how to add the drive, how to partition it and so on. I need some help in understanding how to shift the data from one physical drive to the other without losing any simlinks and data of course. I have a virtual host web server running on my machine, so you can understand how difficult it would be if I'd need to do all the linking manually again or worst case if I'd lose any data.
View 9 Replies View RelatedI just purchased openSUSE 11.2 x64 on DVD from osdisc.com, as well as the 5 x64 repository DVD's. The base install went fine, but when I try to add thos's to my software repositories using yast they all have the same listed name, "repository" - I can change that to show "repository disk 1" etc, but when I go to install stuff and the software installer asks for "repository disk 1" I put that in the dvd drive, and it cannot recognise it, spits it out and asks for the same disk again...hmmmm. Should I not change the default name that comes up when each DVD is added to the list? If I leave them unchanged will I be told which is the correct disk to insert, remembering that in the list they all have the same name
View 8 Replies View RelatedTried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.
View 1 Replies View RelatedI have an external hard drive that I use with my laptop and I want it to be mounted at boot. I used YaST to do this by using the Partitioner. I selected the volume, then edited then chose to have the partition mounted at boot.
On next book the computer booted up and mounted the device as I expected but the boot up process took a long time. When I would usually get the desktop I got only a black screen for about one minute, the the desktop finally loads. I tried to reboot a number of times but I still get the same delay.
When I go back and choose to have the hard drive not auto mount and then reboot there is no delay in loading the desktop. So it seems like mounting this device is delaying the loading of my desktop on boot somehow.
Below is the line that is added to my fstab file to auto mount the drive:
I'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies View RelatedI wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
View 9 Replies View RelatedI've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies View RelatedIf you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
View 7 Replies View RelatedOn Ubuntu, the local user is automatically added the xhost list when logging in (via a script in /etc/X11/Xsession.d).
Is there a way to enable this in OpenSUSE?
(My original problem is that I cannot interact with a running X session when loggin in via SSH, since newer GDM versions don't create $HOME/.Xauthority any longer.)
My install of 11.4 (& 12.1) won't load unless I add the X11failsafe option to the loading of 11.4 (& 12.1) in the Grub menu.lst file. They bomb out after resetting the video when booting. I don't need to do this with my 11.3 install. Upon closer inspection 11.3 is using the nouveau nVidia driver, whereas both 11.4 & 12.1 are using the fbdev nVidia driver. My Hardware is a GEForce 6150SE and a Samsung SyncMaster 933SN. I have a couple of questions
1) What do I lose by adding the X11failsafe option in Menu.lst?
2) Can I, should I, replace the fbdev driver with something else. If yes, What? Nouveau?
I've got two drives, one with Ubuntu 10.4 and one with Win 7. My BIOS boots to the Ubuntu drive, which has Grub2 installed. Apparently though, since I have Win7 on the other drive, Grub doesn't find it and won't generate a boot menu entry for it. I'm attempting to just add one to the menu by editing /etc/grub.d/40_custom, but those attempts aren't quite working. That adds an entry to the menu, but apparently I've got a parameter wrong somewhere.
View 5 Replies View RelatedI have been running 11.04 for what i'd say is about a month now. In the very beginning, i shredded through a few installs, because i couldn't get windows and 10.04 to play nice. With the new update, and some renewed motivation (Portal 2), i'd like to try to get both up and running again.
First, the details. I installed both OS's in a jumbled order, realized that i basically effed everything, and wiped both drives clean. I then installed windows, then Ubuntu 10.04. I think my main point of error was the way i set up the boot sectors on my final Ubuntu install, but i can't remember how i did it. all i know is that linux is sda, and windows is sdb. what is strange, however, is when i do an Fdisk of my mounted drives, i see 3 partitions under sda1, labeled sda1, sda2, and sda5
On to the previously tried methods: I've tried a simple mount of the windows drive, followed by a "sudo update-grub." all this gets me is a list consisting of 11.01, 11.01 backup, 10.04, 10.04 backup, and memtest86+. not even a hint of windows.
I've tried "sudo grub-install" on both sda and sdb, but still no dice.
That's about all i've tried. I've searched for the past week with limited results, and i'd really like to avoid reinstalling ubuntu if at all possible. Any other information, like an fdisk results list or anything like that can be provided if need be.
I'm using ubuntu 10.10 and I would like to add a drive to grub. I have windows xp installed on the other drive, but in order to get to it right now I need to change drive priority in the bios. So how do I go about adding this new windows drive to grub?
View 3 Replies View RelatedI need to boot off an SD card (installed Fedora on it with unetbootin), but my BIOS doesn't recognize it at bootup. I'm thinking Grub might be my only way of doing this. Google shows me ways to do this with Grub 1, but not Grub 2. Anyone know how to add an option for an SD card to the Grub 2 menu?
View 1 Replies View RelatedI need to add Fedora to ubuntu's GRUB Here is my fdisk -l
[Code]....
For some reason the fedora grub didnt detect my windows recovery partition (Im on a netbook).How would I go into adding that to grub. Its on /dev/sda2
View 2 Replies View RelatedI have installed Windows 7 64-bit, Fedora 13 64-bit and Windows XP 32-bit. I had to install the 32-bit XP for some driver issues I have with obscure devices I own. Windows 7 and Fedora both boot with no issues but Windows XP is not the in the GRUB loader as it was installed after Fedora. I have tried adding a few entries to the menu.lst file but my attempts failed. The output of fdisk -l is here
Code:
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[code]...