I just installed the brand new 11.4 on an old Dell Optiplex GX280 box. After the proxy been set, I tried to open firefox but then, all jumps back to the log in screen. The same happens when I try to open pgadmin. After logging in, all the open windows are gone.
View 1 RepliesI want to install Suse 11.3 on a Proliant server. I thought not to take the obvious Windows CD's (little sorrow now) and try Linux. I used an USB Live CD to start. I tried all the startup options like apci=off and so on. Also tried lower resolutions and VESA. Still no luck. After running and starting (seeing in ALT-F4 the Kernel loading), all ALT screens get a blank black screen. Only option is to restart, while then SUSE is displaying it is going down.
View 7 Replies View RelatedThe program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that
For about a month now, my mouse has been jumping to one of the corners of my screen every few minutes (normally the top-left). I also had a problem where the right mouse button would double-click 90% of the time.
I just replaced my mouse a few minutes ago, and now the right button works fine, but the cursor keeps jumping to the corner of the screen.
I'm fairly certain this is not a hardware problem, since switching mice did not fix the problem.
Both were PS2 corded laser mice.
I installed 10.04 on new computer for office, got everything working great at home with old 15" monitor, took to office hooked up to Multisync 97f monitor, and not recognized 640x480 is best. I Have onboard Geforce 6150se/ 430 and have the newest driver installed from Nvidia 256.44. I tried to install everything that said multisync in synaptics but screen jumps around when trying to click on anything because it don't fit right.
View 5 Replies View RelatedI'm running a Fujitsu Lifebook T5010 with Linux Fedora Release 12 and the mouse is way too sensitive, jumps all over the screen when I touch it, especially if 2 fingers touch at the same time. I've tried all the system settings and nothing helps. It works fine with Windows XP Professional.
View 2 Replies View RelatedI installed OS11.4 on my old laptop, Compaq Armada E500., 512MB RAM, ATI Rage Mobility. During installation I chose "minimal server" and added some development packages, lxde and a little more. I chose to start in runlevel 3 which is full networking without X. Still, when computer is booted it tries to start Xorg which doesn't work because of some problem w driver. The start-up seems to stop there, it never loads completely - seems most things in runlevel 3 are not started (see below) I can manually login on laptop and fix it - but never permanently, same thing again after reboot.
I have checked /etc/inittab & yast - both states default runlevel is 3. I have checked services to be started both directly, browsing directory /etc/rc.d/rc3.d/, and with YaST, it is very clear X should not load during boot. But, as said, it does.. I don't really care about the driver problem right now, I can fix that later when I have more time. So how do I stop X from getting started automatically?
More info, if needed: The installation also stopped with message on tty1 "Starting YaST2" and tty8 showing errors with graphics driver (mach64). The system seemed to be installed though, so I simply rebooted (issuing "reboot" from tty2).
[Code]....
I'm not completely sure where it stops, network is configured but keyboard is wrong and mysql & everything after is not started, so somewhere between S02network and S06kbd. I'm going to use it as a server for testing purposes so no X is actually needed - however I do want to have X & lxde installed just in case, my Internet connection at home is terribly slow so I need most things I might need in the future installed today.
I have a dual-screen set-up with Ubuntu 10.10. I have an ATI Mobility Radeon HD 5650 video card. I use my lower-resolution laptop screen on the left and a larger monitor on the right. The monitor is also physically higher than the monitor. See attachment for a screenshot.I have correctly set up my displays so that if the mouse is in the middle of the screen it can move from one screen to the other without jumping. The jumping happens when moving off of one screen in an area where the other screen is not directly next to it (some people call this 'the void').
Example: (See the attachment for a visual example of this.) My mouse is in the external monitor (right monitor). As I move the mouse to the top-left of the monitor (position 1), I by mistake go a little too far and instead of hitting the Ubuntu applications menu, I ended up at the top-right of the laptop monitor (left monitor; position 2). I quickly realize my mistake and move the mouse back to the right monitor, but now the mouse is at the middle-left position (position 3).This same error occurs by moving the mouse on the laptop monitor (left monitor) passed the bottom-right position. This is a big problem when scrolling vertical scroll bars on the laptop monitor (left monitor).I am looking for a fix that if the mouse is at position 1 in the attachment and I move the mouse left, it stays at position 1 and does not go to position 2.
slackware and am infact running Vector Linux which is slackware based. I used to use fedora on my old laptop got a new on and tried vector. The mouse on the new one doesn't seem to want to work properly, it jumps alot and usually ends up at the end of the screen unable to move, however does manage to click almost every icon on the screen and change desktops.A USB mouse works fine its just the touchpad.It's a Zoostorm Freedom and I can't even find the windows drivers for it let alone what i need for this. I tried editing the xorg.conf to stop the tab button, which doesn't do anything, installed the latest synaptics and still nothing, tried using what someone else uses and still nothing, I cant even find out what kind of mouse it is!?
View 1 Replies View RelatedopenSUSE 11.2, KDE 4.4.4
If I use amarok to change the volume or receive a notification from kopete: the volume of the PCM channel jumps to maximum.
I don't want this feature or bug because the sound quality gets very very bad if PCM is maxed out. Would love to keeps this around 90 %.
This issue is probably a known issue but I was unable to find correct keywords to google for.
I was playing a game called "BZFlag", it's a full screen game, and I saw someone sent me an message on skype and I pressed "alt+tab" trying to get out from the game... but nothing happens, i was still in game, and i couldn't quit the game, the game wasn't catching my keyboard input at all.
View 2 Replies View Relatedso have used the kde screen edge thingy once for Firefox with another application, but now every time that i launch Firefox it uses the half window option and have to maximise it every time. Is there any way to tell KDE that I wish to use maximised screen every time that Firefox launches.
Have tried putting Firefox window to middle so screen edge would maximise window, then close Firefox that it would save that setting, but not listening. Does it maybe have something to do with Kwin?
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
I have Ubuntu 10.10 installed on my pc with XBMC installed. It's set to boot into xbmc on start up and works fine. I also have squeezebox server (a music server for my network) installed and again don't have any trouble. I'd now like to get squeezeslave running, a client for squeezebox server so I added the following lines to /etc/init.d/local:
#!/bin/sh
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
squeezeslave -o0 -r3 192.168.1.3 &
exit 0
This fails to start the client on boot, however if I ssh into the machine and run /etc/init.d/local it runs fine.
I have a fresh install of Cent OS 5.4 and am having a problem with Openoffice application not starting up, word processor, spreadsheet, etc. none of them start.
When I try to open word processor, It just loads for a bit says "starting word processor", then closes.
I uninstalled and reinstalled through add/remove software tool and that didn't help. I read somewhere that selinux causes problems with it so I disabled selinux, restarted, and that didn't change anything.
I have a computer with redhat installed that once it boots up it comes to an application login screen. I want to bypass that and get root access to reformat hard drive and install latest version of Debian Linux.
View 1 Replies View RelatedIsn't it possible to create a launcher to an application and in the command tell it to start minimzed?
Something like
vlc --minimize
Or something similar? this would be helpful to application on startup not crowding your desktop on login.
I have installed websphere application server community edition from ubuntu software center. Now whenever i tries to execute the file "startup.sh" (which is the file to start websphere server) i receive following error.
Quote: Neither the JAVA_HOME nor the JRE_HOME environment variable is defined. At least one of these environment variable is needed to run this program. Now i searched web & find out the way to set JAVA_HOME environment variable which is according to my knowledge done by following command.
[Code]...
I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies View RelatedI am using my OpenSuse 11.2 in VMware Workstation. I didn't do anything to it and when I open it, there is no more GUI coming up. Only command line interface came up. how can I change this back to GUI?
View 9 Replies View RelatedI have a HP mini 5101 wit OpenSuse 11.2. Unfortunately, I wanted to have a newer version 11.3, but I upgraded in a wrong way and the system not started any more, failed in start-up level 5 and ran the Kernel. I tried to find the solution, searched on google, but I think made it worse (personal feeling): made some changes in xconfig. Of course, the problem remained. Then I decided to make a system recovery. Everything was OK, until the last step, when the system prepared the first login. I saw this message for a few seconds:
Code:
*** Starting Yast2 ***
basename: missing operand
Try 'basename --help' for more information
SPP: could not open file: at /usr/share/sax/modules/SPPParse.pm line 61
When I switch on my netbook, during the loading everything seems ok, after loading I see the background but no login window, nothing. I don't know what's the problem.
I started the system recovery again and again. In few times I saw this on screen for a second, then return the background:
[Code]...
Running OpenSuse 11.4 and have setup 2 x Raid5 configs - raid created, disks format, everything working fine. I've just rebooted and the raid5 fails to initialize.
Getting these errors:
Code:
May 29 16:58:30 suse kernel: [ 1788.170692] md: md0 stopped.
May 29 16:58:30 suse kernel: [ 1788.197864] md: invalid superblock checksum on sdb1
May 29 16:58:30 suse kernel: [ 1788.197876] md: sdb1 does not have a valid v0.90 superblock, not importing!
[Code]....
I had a question about starting scripts when my user logs into the system. The script is just a simple bash script that runs an infinite while loop that does a who | grep <USERNAME> and if it returns zero then executes a program and then exits the script. First I tried adding my script to the /etc/init.d dir but after login I could not find the script running anywhere using ps -ef and/or ps -aux. Then I tried adding the script into the /etc/init.d/rc*.d directories but also could not find it running. It wasn't until I decided to use the "Startup Applications" option in the "Control Center". So my question about that is, where does that application add those apps to so they start at login time? I could not find any "links", etc... for that script in any of those dirs?
Also, one other question. How do I create a user that I can use for SSH and su to if need be, but not have the option to login to that user at boot time. Before I created the other user, it would just automatically login to the my "everyday" user account, which is what I want. But now with the new user I get prompted to select which user I want to login in to.
I want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.
View 9 Replies View RelatedI have this 11.0 64bit workstation here. It has been running flawlessly for the longest time. It is setup really nicely for this particular job.Anyways, I would to upgrade it to 11.2 64bit without starting from scratch. What would be the best, simplest way to do this?
View 9 Replies View RelatedI'm trying to install OpenSuse 11.3, everything went fine untill last step : configuring hardware. So my install hangs up at the point "starting sound card" (well it is in french, but it should be this translation in english). My sound card is a classical realtek hd audio card (from a laptop toshiba x200). In the terminal(/dev/tty1) I can see that it is hanging at Starting Yast2. I had no pb with my previous installs regarding the sound card (with openSuse 11.2 and earlier). what to do to have this step working, or at least have the sound card not started at this point.
View 1 Replies View RelatedI am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies View RelatedWhen I boot I get this error:
Starting CRON daemondone
Starting smartd done
Starting VirtualBox kernel moduledone
[code]....
all of a sudden my pc decided no to start anymore.YOu might be aware of the ide/sata driver problem, well it was the problem. I reinstalled grub with suse dvd and it went ok. Pc working properly. But then i tried to fix this once for all and changed the fstab options from /dev-by-id to uuid (all partitions : swap, /, /home etc ).Is uuid a definite solution ?Why is the pc not able to start from there ?
Since i moved the partitions with uuid option in fstab and even after reinstalling grub the pc is not starting anymore . It gives me the boot menu (linux suse/failsafe) and then a black screen left with no keyboard nor mouse available.
[Code]...