I have installed opensuse 11.3 by DVD (bad ; maybe bad DVD burner HW; tried several times); XKDE live CD (recognized Primary HDD as SDA); and now KDE live CD; originally recognized as SDA; now reinstalled 3 times and always SDB. And it will not boot to anything; and cannot find grub menu list. I do have 2 HDDs, but secondary is just used for personal file storage.
View 9 RepliesI'm trying to configure autoyast to create three primary partitions:
/dev/sda1 (/boot)
/dev/sda2 (swap)
/dev/sda3 (/)
This is the XML I've come up with:
HTML Code:
<partitioning config:type="list">
<drive>
<use>all</use>
<initialize config:type="boolean">true</initialize>
<partitions config:type="list">
[Code]....
I seem to be missing an instruction or misunderstand something here.
My dvd (sata) has a weird behavior. When i shut up the computer it works fine for a time, but after that (i don't know why) it stop does not work and my open suse 11.3 don't recognizes any dvd..
View 1 Replies View RelatedI read that synaptic touchpads should support multitouch and as I have one of those I tried to enable it. However I wasn't successful.
After some digging in config files (I had to enable SHMConfig) I ended up with KDE configuration tool which is really cool but all multitouch options are there disabled. And also there is an information which says that only one finger is detected by this touchpad.
Is something wrong or my touchpad just doesn't support multitouch? I got this laptop 1.5 years ago so it's not very old.
And by the way, I have this in my Xorg.0.log
Code:
[ 28.821] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 28.821] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 28.821] (EE) No input driver/identifier specified (ignoring)
[Code]....
How do you swap between primary and secondary languages for the keyboard (using GUI not terminal codes since this is for someone else who is a beginner at computing)? I installed the secondary language in the "language" section of yast, but can't see any options for swapping on the fly. Lets say they do 99% of stuff in english, but get an email they want to respond to in the secondary language or want to write a text document using the secondary language, is there a way to switch back and forth on the fly?
View 9 Replies View RelatedI used Acronis' Disk Director Suite 10.0 ["DDS"] to create 7 logical partitions of 23GB each, into one of which I asked Fedora 11 to install. Fedora 11 completely ignored me and created 2 primary partitions of its own: a 217.4GB, a 2GB and a 2GB "unallocated." I will likely delete this installation for a number of reasons. How can I force fedora to install into a 23GB logical partition that I created for just that purpose? If I can't use DDS-created partitions then why do I need DDS-created partitions?
View 8 Replies View RelatedI installed openSUSE 11.3 on my Dell studio laptop with Mobility Radeon HD 4500 graphics card and everything worked straight out of the box.
Now.. I am connecting my tv through HDMI cable as second monitor. Basically I just want to play movies on my tv while still having the laptop screen free to work. This also works, I just plugged it in and I had two screens.
My problem is that my tv is the primary monitor so basically my laptop background (and all the buttons that go with it) moves to the tv and my laptop background is just a background. See attached image at the bottom of this post(Laptop on the left and tv on the right).
This is exactly what I want but the other way around. I can't seem to change this in System Settings/Display. Is there a file somewhere I can change this?
ImageBam - Fast, Free Image Hosting and Photo Sharing
I have ubuntu lucid as the primary os on our main computer here at home. Due to some compatibility issues (wife), I need to install Windows xp instead of lucid as the primary os on this computer. I do plan to put ubuntu back on it as dual boot, beings that I don't particularly care for windows for what I use this computer for.I'm usually fairly competent when it comes to installing operating systems and whatnot, but for some reason this computer will not boot from my xp boot cd, irregardless of whether or not I select boot from cd.. It just boots straight to ubuntu.
View 3 Replies View RelatedI have openSUSE 11.2 KDE with NVIDIA drivers. I have a TV on the left and a monitor on the right. In the Nvidia drivers this has also been setup as stated. The TV is on position 0:0 and the monitor is in position 1920:0. The monitor has been ticked in the drivers as the primary screen.
My problem is that all application open on the secondary screen and not the primary screen (monitor) as I expect. How to the OS/drivers that will ensure that application always open on the monitor situated on the right are welcome.
I need to set up a domain controller that can communicate with windows machines as well as be accessable by the domain name and allow me to log in to the domain from my windows machines. i do have the novells guide to compTIA linux+ book but i cant figure out what i need to do to set up this server in the way i described above.
View 4 Replies View RelatedI'm using xp with one primary partition(C) for xp os,three logical drives(All NTFS).Now i want dual boot with red hat linux.When i inserted the dvd and booted from dvd,it is not going further from starting menu page(press F1-help,....F5-rescue mode).When i installed in vmware it was installed properly.But here why it was not running.I can't buy another hard drive for linux,i have to use the existing disk for both xp and linux....
View 3 Replies View Relatedsince fedora wasn't running very stable at first I tried installing centOS and noticed that it detected my hardware differently.......
When installing F10 it recognizes my 160Gb system drive (IDE1) as sde (behind my 4 SATAII drives). CentOS recognized correctly that it is hda.
I have used Ubuntu and Fedora and am familiar with Linux for about two years now. I have recently installed Arch Linux on one of my computers, and I like the distro so far. However, I am having an issue with my USB hub. When I connect a mouse and keyboard to the hub, the computer only recognizes input from the device that I plug in first when using a window manager (the keyboard always works when I am not in a window manager). If I disconnect one device, the other device starts working. Both devices appear in dmesg when I disconnect and reconnect them. So the computer is recognizing the devices independently, but input from one device is not received. I have tried this on both Gnome and Fluxbox, with the same result. If I plug both devices directly into the computer's USB ports, both devices work at the same time. The hub works on a Windows 7 system and on an Ubuntu system, so the hub is not faulty.
More information: My keyboard is Microsoft Razer Reclusa keyboard. My mouse is a Logitech Wireless Mouse M215.
Below is the dmesg output that I think is relevant to this issue. Here is the output I get when I plug in my USB hub (without anything plugged into it), then plug in the mouse to the hub, and finally plug in the keyboard to the hub:
Code: usb 1-4: new high speed USB device using ehci_hcd and address 80
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-4.2: new full speed USB device using ehci_hcd and address 81
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input96
generic-usb 0003:046D:C526.005D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-4.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/1-4.2:1.1/input/input97
generic-usb 0003:046D:C526.005E: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-4.2/input1
usb 1-4.1: new full speed USB device using ehci_hcd and address 82
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 3 ports detected
hub 1-4.1:1.0: activate --> -28
usb 1-4.1.3: new full speed USB device using ehci_hcd and address 83 .....
Interesting to note is that the line that say "usb 1-4.2: reset full speed USB device using ehci_hcd and address 94" increases in the number of times it appears over time. This happens in both scenarios, with the address number changing appropriately. So for example, when everything is plugged in, and I type dmesg, the line appears five times. Then when I type dmesg again, it appears 11 times. etc., for each subsequent dmesg call until the device is disconnected.
I want to have apache + php + mysql.My apache does not recognize php and mysql is only partially installed.Php works but not thru apache. The apache conf file has no reference to it.In case it matters, I insalled some security updates that created a defective later version -2.6.32.5 which loops and displays garbage. At startup I interrupt grub and tell it to run the old one. I would remove the defective one but don't know how. I'm an experienced systems programmer with almost no unix time. (pdp8-os8, pdp11-rsx, tandem-tal, vax-vms,os360, etc)
View 10 Replies View RelatedI've had Fedora 11 running on my PC since shortly after release. I have a DVD-ROM as the Master on the single IDE port on my MoBo and a DVD-RAM as the slave on that port. I also have 4 ea SATA 500GB HDDs using JBOD configuration on the MoBo. When I first installed F 11 I noticed that if I dupped a CD the blank icon would stay on my desktop, even though I had removed it. Also it did not "see" that I had put a new blank in the burner. I would have to reboot to correct. However the system would recognize an audio cd, play it rip or whatever.
Now the first problem I think has gone away but neither drive when I put an audio cd into them will recognize it. The light on the drive will come on and then start flashing as normal, but nothing happens. When I check to see if I can manually mount it, the system comes back with No Media in drive. Anyone have any ideas? This seems to have happened I'd say about 1.5 weeks ago was the last time I know it worked. I suspect an update possibly "broke" something. Any reliable knowledge base as to what actually transpires between the time I put a CD in the drive and the icon pops up and it starts playing or whatever.
I made a mistake installing the most recent distro of Ubuntu. When choosing where to install the loader, I selected "Windows 7 (loader)" instead of the proper default option. Now when I select Windows 7 in GRUB, it just brings me right back to GRUB.
However, my Windows installation and all the files are still present on the disk. The recovery disk doesn't recognize the Windows installation, but all the files are clearly present. I was even able to recover my most important files onto a USB drive using the file browser in the recovery disk.How can I correct this mistake? I need to be able to boot into Windows 7 again.
I don know how this happened, but my system only recognizes an disk when the disk is blank. If thereś anything on it it won mount it. Why is this happening?
View 6 Replies View RelatedI have a quad core computer. The video card, I believe, is a Zotac 9500. I installed Fedora 12 in a dual boot along side Win 7. The problem with the Fedora installation is that it only recognizes video of 800 x 600.
View 10 Replies View RelatedI just installed Ubuntu 9.10 on a hard drive for another computer, then I switched it back to it's original computer and when I try to update or anything, it won't get the packages because it isn't connected.
So I try entering in lspci. It recognizes: Ethernet Controller: Intel Corporation 82557/8/9/0/1 Ethernet pro 100 (rev 0
as one of them. I have the Ethernet cable plugged in, the Ethernet light is on, so it detects the cable. It just won't connect, and I have a valid connection or I wouldn't be able to be on here right now. I've tried 2 cables, still a no go. Is there a way I can connect or will I have to put the HD in the other desktop again and install everything and some drivers?
I'm using Ubuntu 10.04 x64, and I have an AMD Phenom 2 x4 940 CPU. First I have to underline that four cores worked perfectly in previous versions of Ubuntu as well as Windows.
When looking at system monitor it tells me that I have two CPUs/Cores, it should be four.
This is the output of CPU info:
Code:
processor: 0
vendor_id: AuthenticAMD
cpu family: 16
model: 4
[Code].....
It recognized the webcam alright. But after an update perhaps a couple of months ago, it no longer does. Skype is Beta version 2.1.0.81. If I go to Options, Video devices, it shows me only one option for webcam, namely Quote:USB Camera (05a9:a511) (/dev/video0)I click on test but nothing happens. I can communicate and see the other person, but she doesn't see me
View 9 Replies View RelatedI just installed it yesterday, version 10.10, desktop edition, downloaded from Ubuntu's site; running it along side Windows; and love it from the get go, but... I can't get the Flash plugin to work.
I'm running a Toshiba Satellite Pro P505-S8945 with this specs:
2.0GHz Intel Core2 Duo P7350 Processor
400GB Hard Drive, DVD SuperMulti Drive
Microsoft Windows 7 Home Premium (32bit), 4GB RAM
ATI Radeon HD 4570 Graphics
I tried installing the 32bit version on Flash but kept getting error messages about "wrong architecture i386", so, I went to the (sorry if i make a mistake I'm paraphrasing) "Ubuntu software center", the application within Ubuntu where you can go to the repositories and get software upgrades, and I realized that for some reason Ubuntu is recognizing my system as running on an AMD 64 processor, which I'm not! Mind you, I haven't tried to install the 64bit version of flash, just wondering really, the reason why Ubuntu would say that I'm running on a 64bit AMD processor!
Is there an add-on for Rhythmbox which recognizes track info from the sound of the track like the shazam app?
View 2 Replies View RelatedHow kernel/OS recognizes the LVM volumes when the system bootes up ?
View 4 Replies View RelatedI have just installed a Virtual Machine with Debian. My goal is to set up a LAMP server to work with. I have installed Apache, PHP and MySQL, everything without any problems and following WIKIs.
Now, I have a problem, because I'm trying to work with folder within my /var/www folder. If I use the address http://192.168.1.103 in my Host computer's browser, I can see the "It works!" from Apache without a problem.
Now, if I try to see: http://192.168.1.103/test/ I can't see the index.html that is within the folder test that is on the path: /var/www/test Why is this? What do I need to do and keep this simple?
I own a D-Link DI-604 wired router and I've started getting some issues after Ubuntu 9.10 to 10.04 upgrade(Ubuntu 9.04 used to work OK!). The problem is that Ubuntu recognizes all my ethernet cards (see below), but I can only connect to the internet through eth1 not eth0 (which is my Windows default). If I try to plug the cable in eth0 nothing happens (at least not in Ubuntu 10.04 and 9.10).
Code:
lucas@lucas-desktop:~$ sudo lshw -C network
[sudo] password for lucas:
*-network:0
description: Ethernet interface
[code].....
my HP Pavilion a335w on board NIC stopped working. I've tried putting in another NIC in the PCI slots #1 & 2 of the three available and the system does not pickup the card. I thought it was because it was an old 3com 3c905b and was not supported.I took the box to Best Buy and purchased a new Linksys card and had them install it.The Geek Squad told me that the Motherboard was bad, no charge.I took it to a refurbishing store and the very patient gentlemen tried to get a Netgear FA310TX card to be recognized with no luck.I took the Netgear FA310TX card home and put in slot #3 and booted up with the install disk. In Rescue Mode it recognizes the NIC and gets an IP address from the router.If I boot up normally without the install disk, then it does not recognize the NIC.
View 7 Replies View Relatedi will get directly to the problem. I'm a mid-experienced ubuntu user and i'm facing a harddisk problem in my opinion. When i try to install 11.04 and 10.10 ubuntu doesn't recognizes my w7sp1x64 volume (157 gb one). accually ubuntu acts like there is no ata device connected and no matter what i do is useless. at first i thought mybe my hdd is damaged but w7 boots like a charm; but i can't even install ubuntu. here are some pictures about my hdd:
[URL]
btw i can't see any devices connected on gparted
As of yesterday, afetr an upgrade that recquired restaring the system, I connected my iPhone as i have always done, just to charge the battery with the USB cable. Well, to my surprise, a window other than the camera one that asked about launching FPhoto, appeared; it stated that my iPhone could launch Amarok or Rythmbox, my choice.
Well, to my surprise, the phone is recognized and all the music is loaded in Rythmbox, but in Amarok it takes a very long time to just achieve a 60ish% gain.Now in the desktop an additional icon appears one of a generic Nokia type phone.I have searched, and am aware that Lucid will have support for my iPhone, its just that it is happening now.
I've been using banshee for a couple weeks. And it's worked great up until now. This happened one other time, and I reinstalled ubuntu, and it worked fine. Now it's not working again. What's happening is, I plug my ipod in, and banshee recognizes it. But when I try to put music onto it, it says it's syncing, and then I disconnect, and the music isn't on there. I updated podsleuth, but that didn't seem to help.
View 1 Replies View Related