OpenSUSE Install :: 11.2 Update Error

Mar 11, 2010

When I try doing a software update, regardless if via applet, YasT, or zypper I get the following error.

Code:
mozilla-xulrunner190-gnomevfs-1.9.0.18-1.1.i586 requires libgnomevfs-2.so.0, but this requirement cannot be provided

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Kernel Update Also In Error On 11.2?

Sep 26, 2010

After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.

1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot
2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.

After boot the system could start but modules were not loaded.

3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first.
4. The same for /usr/src/linux-2.6.31.12-0.2*

Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?

View 4 Replies View Related

OpenSUSE :: Update Error On Suse 11.3 (fresh Install)?

Jan 6, 2011

I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."

View 8 Replies View Related

OpenSUSE Install :: Crash During Update - RPM Failed Error

Jan 1, 2011

So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.

Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?

I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.

Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....

The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.

View 9 Replies View Related

OpenSUSE Install :: Can't Update Any More - Error Connection Failed

May 7, 2011

I can't update anymore since a few days :

Download (curl) error for [URL]...
Error code: Connection failed
Error message: Failed to connect to 2a01:e0c:1:1598::1: Network is unreachable

I read somewhere that I should deactivate IPv6, which I did with no success. It seems to happen since I upgraded gnome following this link : Archive:GNOME 2.30 - openSUSE My Internet connection is of course alive and working.

View 9 Replies View Related

OpenSUSE Install :: Update Failure - "PackageKit Error Internal-error: Installation Aborted By User"

Jul 13, 2009

Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?

View 8 Replies View Related

OpenSUSE Install :: 11.2 Update Error: Failed To Download From Repositories

Feb 22, 2010

The red updater icon alerted me to about a dozen patches, which started to install, then halted with an error: Download failure from download.opensuse.org/distribution/11.2/repo/non-oss. When I try to update repositories, the same error recurs for that repo and also for .../oss and download.opensuse.org/update/11.2/,

If I attempt to "register for support to get update repository," clicking on Configure Now and Next produces the same three error messages: "Failed to download", one for each repository. The screen then returns to Registration, with another error message "an error occurred while connecting to the server". Clicking on the Detail button show exactly "ERROR:"

This AMD desktop machine with this install of 11.2 has updated many times in the last few weeks. Has something changed? The update servers do respond to a ping, so they are up and apparently I have connectivity.

View 9 Replies View Related

OpenSUSE Install :: Dependency Error During Patch Upgrade Of KDE 4.3.5 Update

Feb 25, 2010

I get following error during automatic patch upgrade of my SuSE 11.2 to latest path revision. I assume it is due to the KDE 4.3.5 Update part of the patch set: compiz-kde4-0.7.8-9.14.x86_64 requires libkdecorations.so.4()(64 bit) but there are no providers. The package manager suggest to replace compiz-kde4-0.7.8-9.14.x86_64 with kwin-4.3.5-0.2.1.x86_64 but I don't want to loose compiz-kde. which repository I must add to resolve the dependency.

View 4 Replies View Related

OpenSUSE Install :: KPackageKit HTTP_PROXY Error On Update 11.4 - Connection Failed

Mar 11, 2011

I am having an issue with KPackageKit, actually 2 issues but one makes it unusable. The major issue is that when I go to apply the updates I get the following error message (at least here are the details of the message)

Code:

Download (curl) error for 'http://download.nvidia.com/opensuse/11.4/repodata/repomd.xml':
Error code: Connection failed
Error message: Couldn't resolve proxy 'HTTP_PROXY'

I do not run my connection through a proxy and my internet works correctly. This is on a laptop I upgraded using zypper from 11.3 to 11.4 (I did the same with a desktop which does not have this issue). zypper refresh successfully refreshes the repositories, and the various Yast repo tools all work correctly. Additionally after I am shown the updates and am prompted for root pw, the packages will no longer show up for a while, each time it tries to look for updates the message comes through but they will show up after a while again. The other issue I have is that it requests my pw multiple times, this also happens on my desktop that actually will update. I get prompted twice, they are immediate and back to back. This one is a little minor annoyance but there should be no reason that it needs to make this request multiple times.

View 9 Replies View Related

OpenSUSE Install :: Error 15 - File Not Found After Update 11.3 On A Dual-boot PC With Ubuntu 9.10

Oct 22, 2010

Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :

$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),

[code]....

View 9 Replies View Related

OpenSUSE Network :: Network Not Work \ After Install All Packet On Test Internet / Update Was Error?

Jan 5, 2011

I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP

View 8 Replies View Related

OpenSUSE Install :: Can't Update (by Update Applet), Install Codec, New Software

Jul 19, 2010

i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .

View 1 Replies View Related

OpenSUSE :: Management - Update - Install Or Remove A Package - Subprocess Failed. Error: RPM Failed: Rpmdb: PANIC: Invalid Argument

Apr 9, 2010

Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.

[Code]....

View 4 Replies View Related

OpenSUSE Install :: Online Update Fails To Refresh Update Repo?

Sep 21, 2010

when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:

Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz

from http://download.opensuse.org/update/11.3/
A[code]...

View 8 Replies View Related

OpenSUSE :: Unable To Update - Gets An Error

Jul 3, 2010

I've been having this problem for a while now. Every time I try to update using

Code:
zypper up

or even by using YaST it stops midway. For example in using Zypper I get the following error

Code:
Retrieving: 11.2 [error]
Error: Download interrupted at 81%
History:
- [AbstractCommand.cc:195] URI=http://opensuse.uib.no/update/11.2/repodata/4ec3f2acdd863958479cbacbb5bc19f939e35099-deltainfo.xml.gz and it gives a list of URL's like the above.

I don't know what's wrong as I only have the following repositories, Packman, updates for opensuse 11.2, non-oss, oss. The URL for the update repository is Index of /update/11.2

View 4 Replies View Related

OpenSUSE :: Update Causes PhpMyAdmin Error?

Jul 13, 2011

The past couple of updates have messed up my localhost phpMyAdmin application. After the update I get the following error. Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly.

I have the old files backed up and when I restore them everything is ok. Why doesn't the update work? I figured it had to be a path or permissions problem. I gave unrestricted access to all users on all files and it still does not work. I found a php script in a phpMyAdmin wiki and it gives me this: If a session could be started successfully you should not see any Warning(s), otherwise check the path/folder mentioned in the warning(s) for proper access rights.The current "session.save_path" is "/var/lib/php5". Session file name: "sess_dee3dp1j6takbdtpvl702nbcptdivh82". which seems to me to say everything is cool pathwise.

View 4 Replies View Related

OpenSUSE :: Update Repository Has Checksum Error

Feb 13, 2010

I have a problem. When I start Yast, and it tries to download the update repository, there is a checksum error. The problem is, that this error is always there, it occured about 2 weeks ago and never disappeared. When I change the update repository to a specific one, I chose a german one, there is still that checksum error. If I say yast I want to still use the repository with the error, there comes another checksum error, if i say i dont care about that one either, it says

Code:
"Download failed:./repodata/primary.xml.gz could not be retrieved from http://download.opensuse.org/update/11.2/Progress:-[DownloadCommand.cc:195] caught EOF from server"

View 9 Replies View Related

OpenSUSE :: Can't Update Packages In 11.2 - Getting Error / Sort It?

Mar 9, 2010

I need help to resolve this problem, i can't update opensuse 11.2, becouse show me a download error...i tried do it manually but still give me that error.
i opened a terminal and they show me this code...

but if a lock in software repositories, the direction is only this:
Index of /debug/distribution/11.2/repo/oss,
and if i start the software manager, this continue give me that message.
soo please i need help, becouse this is my first time installing this, and i need to give a very quickly s solution.

View 5 Replies View Related

Ubuntu :: Error On Synaptic Startup - Can't Install Or Update Anything In Pc

Feb 25, 2010

the problem that I face it is when I run synaptic package manger or try to install an updates from update manger this error message appear :

PHP Code:

[code]...

and it close he windows after press close button in the error windows.i can't install or update anything in my pc.

View 2 Replies View Related

CentOS 5 :: Boot Error After Yum Update On Fresh Install

Jul 21, 2011

I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.

I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.

View 10 Replies View Related

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

OpenSUSE :: Error : Unable To Get Transaction Id From Packagekit." When Trying To Update

Feb 27, 2010

Getting "DBus error : Unable to get transaction id from packagekit." when trying to update. I can't update or install software through the package manager anymore. The yellow exclamation point won't go away on the toolbar.

View 8 Replies View Related

OpenSUSE Install :: Update System - Without Having To Download / Install Every Dependency Manually?

Dec 13, 2009

how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?

View 1 Replies View Related

OpenSUSE Install :: Download Failed For Online Update From OpenSUSE 11.1

Feb 21, 2011

I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...

View 3 Replies View Related

OpenSUSE Install :: Update Start But Would Stop Right In The Middle And Refuse To Install Pulseaudio(...) Package

Jun 18, 2010

I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.

I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.

I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.

View 9 Replies View Related

Ubuntu Installation :: Can't Update On Laptop - Error "Can't Install 'xubuntu-desktop' It Was Impossible To Install A Required Package"

Oct 6, 2010

I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:

* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu

If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?

View 1 Replies View Related

OpenSUSE Install :: BIOS With A Boot Manager - Update Or Install?

Jan 7, 2010

I had my motherboard fail and had to do a replacement. The motherboard I got has a feature (I don't think I can shut off) that lets you select what drive you want to boot off of. I have XP installed on the first drive and openSUSE 11.1 on the second drive. I am running openSUSE 11.2 with KDE 3.5 and I simply dropped my drives onto this new motherboard. I can boot up (Linux) just fine but am having other issues with my mouse. I am thinking of Updating to openSUSE 11.2 and the current KDE version.

Should I just update to 11.2 or do a new install. I have LOTS of data in my home directory I really don't want to lose and have a partition for data as well that is pretty full. I don't want to lose this stuff. What should I do about Grub with this BIOS that lets you pick which drive to boot off of? Put Grub in the MBR of the drive with openSUSE on it and nuke the MBR of the XP drive?

View 9 Replies View Related

OpenSUSE Install :: Better To Update Current Setup Or Do A Fresh Install Of 11.3?

Jul 31, 2010

I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?

View 4 Replies View Related

OpenSUSE Install :: Error Appeared Stating That Disc Image Was Not Burnt Due To Some Error

Dec 29, 2010

Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.

Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.

View 9 Replies View Related

OpenSUSE Install :: Post-install Update Fails

Nov 18, 2009

On a fresh install (tried two new installs now) I'm getting an error when I try to go out to the update repositories after the install. I'm getting a "failed to download /suse/setup/descr/packages.DU.gz from [URL] It seems to get about 48% and just hangs there. This happens both if I try downloading updates during the install or if I try doing an on-line update after the system is up.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved