the problem that I face it is when I run synaptic package manger or try to install an updates from update manger this error message appear :
PHP Code:
[code]...
and it close he windows after press close button in the error windows.i can't install or update anything in my pc.
after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 Replies View RelatedEver time I try to use Update Manager or Synaptic Package Manager I get this Error Message:
I have been wondering if I just need to do a fresh install. Am currently using 9.10 on a Compaq laptop which is prone to overheating and "freezing", usually within 2 hours. Maybe time to install 10.04?
I am trying to update my system using synaptic but it always end with the error while reloading the package lists
Release file expired, ignoring [url] (invalid since 12d 5h 39min 10s)
I am using Debian squeeze amd64 gnome 2.30.2
Synaptic showing the error.
Screenshot.png (89.63 KiB) Viewed 687 times
Since upgrading to Natty I have a very annoying issue and since I am unable to resolveWhenever I start the synaptics package manager I get the following message:An error occurred:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.Once I run sudo dpkg --configure -a from the terminal this is what I get:Setting up xulrunner-1.9.1 (1.9.1.18~hg20110309r27352+nobinonly-0ubuntu1~umd1) ...No further progress the machine hangs indefinitely on this, need to kill terminal to exit. Even hours waiting does not show any progress.
View 5 Replies View RelatedWhen I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
I get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
I switched to Ubuntu a few months back and now have a problem I can't figure out and would like a little guidance. When trying to run Terminal or Synaptic I get the following error... E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.
View 2 Replies View RelatedE: wp-full: subprocess installed post-removal script returned error exit status 127I had tried to add wordperfect 8.1 from a legit debian file I had on an old Corel Linux CD. [Sorry but i would really like to have WP on my Ubuntu dist. (OpOff) just does not do it for me.] command used dpkg -i wp-full_8.1-nn_i386.debI used command line It partially installed, but required other legacy packages, these then failed completely when it tried to install incompatible font files. Ok . . so I try to back out, but when I try to remove the "wp-x-x-x" file it refused giving me the error above.
View 1 Replies View RelatedAny time i try to install anything from terminal or synaptic i get this error message saying:
Or if i try to upgrade:
If i try to open the software-center the cursor changes but it does not open. This all started when it upgraded to Karmic Koala. There might be two seperate issues but i cannot install or uninstall at all.
I have put som programs in System -> Preferences -> Startup. That works fine, except that Synaptic starts without asking for a password, and therefor also without superuser privileges.Is there a way I can change the command so that it will ask for a password?
View 1 Replies View Relatedi got an pclinuxos LXDE version on my netbook. i installed abiword on it. after that, synaptic and any other package manager refuses. synaptic freezes as soon as i start it up. only a reboot will close it. i searched google, found this: [URL]. i don't understand the instruction there, but it seems to be the same problem i had. i believe they suggest reinstalling. this is a mission-critical-workstation, i can't afford an downtime more then 1 day. so i can't do a re-install. (duo settings i have to apply again, this would take long)
View 2 Replies View RelatedI downloaded the first CD Image as instructed at [url] and installed it on my laptop. I would like to install the "Synaptic Package Manager" and a mirror repository so that my system can update.
I have apparently installed " apt-cdrom add" and then typed "apt-get update" and I tried to install the mirror when the system was installed but as the wireless was not connected it apparently did not add the correct details.
I try to use Ubuntu Software Center, Synaptic or apt-get to install a package, it seems to give an error(okay, USC stops the install and Synaptic crashes), apt-get gives the traceback
[Code]....
I have a Dell Inspiron 5160 with a volare xp5 video card (only recently supported under linux most linux distros and OpenBSD)Thus far I have done graphics install of KDE based on 11.2 and -- froze end of install and at at the logon / splash screen dueing the reboot could not get to a successful run level 3 text logon. (commandline was vga=x317, I think if n ot it was closeInstalled gnome using text install -- first boot (vga=normal - (default from install)) succeeded at configuring X and started gnome.
I really want KDE so I tried again Text install == hung near the end of the install after printers -- I assume trying to configure XRebooted no command line parameter at all ( no vga=) -- hung at login password screen (blank)Rebooted again with -- vga=normal 3 -- and got a text mode login prompt and successfully logged in -- now I can not find the page that talks about sax2 configuration from run mode 3. This video card needs to be set for VGA I think maybe vesa at 1024X768 16 colors (I succeeded at this under OpenBSD)I believe if necessary I can probably successfully edit the x config file but I would like to try the recommended approach first (as a non-root user as recommended) -- can anyone direct me to that page I cannot find again. It discussed 11.3 x config recovery with a section at the bottom for 11.2 and earlier
I've been running Xubuntu for almost a year, and haven't had any problems with it up till last week, when Update Manager said it couldn't install a lib package. Several days later, I saw the update notif saying that there were 12 available updates, so I went to install them, and it wouldn't install any of them. Now, if I try to start Update or Synaptic in any way, they'll open for about five seconds and then close.
View 7 Replies View RelatedI just had a power cut whilst installing updates on my laptop (which dosen't have a battery)
When i try to use update manager or synaptic now i get this message:
When i do sudo dpkg --configure -a this is what i get:
I am trying to run Ubuntu 10.04 amd64. And Ubuntu typically is stable for me dispute all windows installs get BSOD. Graphic card is nvidia geforce 8400. more details will be included in system section
Index:CauseSymptomsSystem
Cause: 3-5 days ago I updated my computer that had not been updated for 2-4 days using synaptic. I had no error warnings so I decided to reboot (I might have used alt ctrl delete to restart). After restart I received the standard prompt that occurs when the graphics driver is having problems. The screen with the options: run low graphics mode, reconfig graphics, ..., restartx.
I tried low graphics. Eventually I boot to netroot. In net root I tried messing with nvidia driver packages not modalias. and messing with xorg.conf using nvidia-xconfig. Also attempted to change drivers using update-alternatives --config gl_conf those are where I messed and possibly exacerbated the problem (but probably not by much)(but I have had nvidia-current driver problems before due to updates that make me decide to reinstall).
Symptoms: The command startx returns no errors that I can tell from the log but startx stops. gdm (in netroot) returns cant find user list (cant readily recall the exact name but sounds like the password and names of users). Then some graphics errors. Most gtk and X programs/commands return the error x window cant open. and gtkbox (the gtk test program I will correct later) returned an error at ".run priority 0". Not when the same command was called with no priority explicity stated.
System: Hardware: user built. Amd Athlon II x3 435. ECS IC780M-A2 (V1.0A) EliteGroup motherboard. 2Gb ram. 500gb linux HDD. 40GB xp 32bit. grub2 boot. Software: ubuntu 10.04 amd64. Sources partners and some APPs.
I suspect the initial cause (before I monkeyed around) was that one of the lib packages that was updated in that session made my computer unstable. Also to note I removed a lot of lib packages in netroot thru the autoremove command. If not one of the lib packaged one of the others that were updated (I wish I could find out what was changed so I could at least undo it manually (in theory).
I have Ubuntu 10.10 installed on my offline PC andhow to get an updated repository for Synaptic using a online PC elsewhere. I need this so that I could generate package scripts to be used elsewhere to download software.
View 9 Replies View RelatedI have a little problem on my relatively newly installed 10.10 Lubuntu that I can't quite figure out. I'm guessing it is a piece of cake for most of you ubuntu-veterans so I'm hoping a kind soul would save my day: The last couple of weeks, the apt-get update (and corresponding button in synaptic) does not manage to update all of my repositories, and I get a "404 not found" error at the end (see attached text file (hope I did that right, am a longtime lurker but haven't posted anything much yet)).
I realize that I have been doing some adding of repositories, and have written the wrong command a couple of times, which may be the cause of this (at least the two frescobaldi ppa errors). What I don't understand, is how I remove these faulty(?) repositories, so that my system stops claiming being unupdated. After searching/googling the issue I tried looking for the corresponding entries in sources.lst, but to no avail.
ps. my system is in german, the messages say "W: Failure when getting.." and "E: some index files could not be downloaded, they were ignored or others were used in their place". (rather badly translated)
Tried to do update via Synaptic after upgrade and received the following info from the terminal:
(Reading database ... 506398 files and directories currently installed.)
Preparing to replace capplets-data 1:2.32.0-0ubuntu2 (using .../capplets-data_1%3a2.32.1-0ubuntu15_all.deb) ...
Unpacking replacement capplets-data ...
dpkg-deb (subprocess): failed to read on buffer copy for failed to write to pipe in copy: Input/output error
dpkg-deb: error: subprocess paste returned error exit status 2
dpkg: error processing /var/cache/apt/archives/capplets-data_1%3a2.32.1-0ubuntu15_all.deb (--unpack): .....
synaptic tells me: "you must manually run sudo dpkg configure -a to correct the problem"
update manager tells me the same thing but also that the software index is broken. And it offered a partial upgrade but it doesnt work or do anything just gets me the aformentioned error message.
I think this was all cause by me interrupting the last update process by pressing cancel, because it froze or something.
I am not able to update at all. Update manager returned an error reading
Preconfiguring packages ...
/usr/bin/dpkg: 1: Syntax error: ")" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
i get the same error if i update in a terminal or from Synaptic Package Manager.
I got this error message today when i ran sudo update
E: Type 'See' is not known on line 2 in source list /etc/apt/sources.list
E: Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-karmic.list
and i cant burn dvd with brasero also my sis760 doesnt work on this
im trying to switch back to windows but i need to copy the image to a dvd
but brasero doesnt work and when ever i use the software center i see nothing under the categories
I recently installed Xubuntu (9.10) in my computer, but... I have been having intermitent hard disk problems, and so I decided to google a little and after reading this:
[URL]
I did use Synaptic to search for smartmontools and then install it.
Synaptic complained that it couldn't autenticate the packet, but I figured this was happening because... this is not an application supported by Canonical? I clicked and installed the packet (well, in fact, I *think* it has installed two applications, not just one).
Then later, I saw one of those arrows at the top right of the screen, and clicked it to install updates. Synaptic told me to update SUDO. Hmm... serious. And then even more: it told me that it couldn't autenticate it I stopped the installation and registered at these forums.
And more: before posting, I tried to reproduce the "error" (and again, stop before installing the "suspicious" SUDO update) but Synaptic now autenticated it troubleless and installed it.
Well, now I have a LOT of questions:
1. Where do I place this post?. Security?. Hardware problems?. Update and installation? (Linux noobiness?)
2. my hard disk?. I've read somewhere that an application called "fsck"
3. What may have happened with Synaptic?. Why wouldn't it autenticate a SUDO update?
4. Have I done something wrong?. Something unrepairable?
5. Can I trust the SUDO version that now I have installed in my system?
6. How could I check what has Synaptic exactly installed?. Is there any log file anywhere in my system?
Is it possible to get them to show the same result.
update-manager says I need 315 files @ 302mb to download synaptic says 315 @ 318mb (using "mark all upgrades" button, then going the summary via the apply button )
this is on a machine with a clean install of maverick without anything new installed/changed from the defaults. Are these the same 315 packages and is it just a discrepancy in the way they calculate the size?
I used "sudo apt-get dist-upgrade -s --print-uris > upgrade.txt" to get me the same 315 packages, but unfortunately it seems the simulation switch (-s) stops it from actually printing the uris (which would include the size info) so no help in trying to establish where/what the discrepancy is.
This is just the 1st step in me understanding the whole process so I can do what I outline in my long rambling post [URL]
When I try to update my system(10.04 Lucid) it gives me this error message.
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_karmic_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
this happened to me before, where when I try to open Software Center, Synaptic package manager, or update manager, it would freeze with the window open and I would have to force it to shut down. I decided to re-install the OS after this happened and I just updated ubuntu and it is happening again.
View 9 Replies View RelatedWhen I try to open Synaptic Package Manager and update-manager it gives me the following error message:
'E:Type 'n' is not known on line 2 in source list /etc/apt/sources.list.d/banshee-team-ppa-maverick.list, E:The list of sources could not be read.'
How to solve this error because my system cannot update or install any new application.
I upgraded an older system from jaunty 9.04 to karmic 9.10/ Following the upgrade, and about six hours of stable use, I ran the synaptic package manager, to pull in fvwm-crystal and a couple of other nits. Synaptic went into its usual tiring Rebuild Index while the resource hog update-apt-xapian ran away gleefully with the cpu pegged. for longer than I've ever seen it... about 15 minutes, and then the system crashed. and, I mean it crashed hard. I have not seen linux do this in years. Not just a seg fault, the whole machine just crashed (cpu, display, keyboard, the works). Restart and no problem, until I ran Synaptic (Rebuild Index. several minutes, crash).I played this game for a while; thinking the system might just might be overheating... let it cool down, and retried.same result. I tried running one last time, and this time pressed the reload (on Synaptic main panel) prior to the crash.it pulled in the repository updates and completed the Rebuild Index. (no crash)
I have run Synaptic several times since that. downloaded some goodies, and have had no further crashes (although, it does run Rebuild Index every time I start it.and update-apt-xapian pegs the cpu while this is going on. The question(s) I have are:
1) I was not aware that an apt these days can bring down the kernel (no panic, no logging, just down....) How is update-apt-xapian tied into the kernel that permits this vulnerability?
2) There appears (from searches) to be a problem with Synaptic or at least with xapian...?? What is going on with this resource pig..?
3) If I disable xapian and use sudo apt-get instead, instead of Synaptic, does this solve this resource problem?
4) Is there another forum area where this might be addressed besides general?