OpenSUSE Hardware :: Enable The Touchscreen Of Packard Bell Visio 200t ?
Dec 27, 2009Is there an way to activate the touchscreen functions of this monitor in opensuse 11.2
View 2 Replies
ADVERTISEMENT
OpenSUSE Install :: Install 11.2 On Packard Bell IXtreme I9610IT
Jan 16, 2010I have installed openSuSE 11.2 on my PC (Packard Bell iXtreme I9610IT) and the installation has been successfully completed.
Packard Bell iXtreme I9610IT
CPU: Intel Core i7-860 (Cache: 8MB | FSB: 1333MHz)
Motherboard Chipset: Intel P55
RAM: 8 GB DDR3 dual channel
HD: 1TB SATA (7200 rpm)
Graphic Card: NVIDIA GeForce GT220 (1024MB)
Sound Card: RealteK ALC 888S HD 7.1 (integrated)
iXtreme I9610IT | Packard Bell
The graphics card (NVIDIA GeForce GT220) was not detected at startup, but the open source driver function quite good. The display (TFT-LCD Monitor HP 2009v 20") has a good resolution altough the screen resolution is smaller than expected, and a frequency of 70Hz (that would be correct to 60Hz). There's no problem, I have found a tool for install NVIDIA drivers in 1-click: NVIDIA - openSUSE (with the official owner NVIDIA driver the display resolution is 1600x900 and the frequency is 50Hz).
The only problem I have found is that sometimes (specially if I open many applications) when I press the shut down or reboot button, the OS logout me instead shut down or reboot itself. When I login again, I can shut down or reboot without any kind of problems (is it a problem of stack?). But the most worrying aspect is that, altough I installed the official owner NVIDIA driver, sometimes when I login again the video shows me only wavy lines.
Ubuntu :: Cannot Install 9.10 On Packard Bell EazyNote
Mar 3, 2010I cannot install Ubuntu 9.10 on a Packard Bell EasyNote MZ35. Version 9.04 was OK. After the installation I get a black screen? I installed 9.04 again.
View 2 Replies View RelatedUbuntu :: Headphone Out Won't Work On Packard Bell Laptop
May 30, 2010I'm the proud owner of a Packard Bell Easynote MZ-35 laptop computer. I'm running Ubuntu 10.04 on it and I'm very happy
My only problem is that the headphone minijack-out wont work. When I plug in a minijack, the pc-speakers just keeps on rocking.
Hardware :: Trouble With Laptop Keyboard On Packard Bell EasyNote R4
Jul 22, 2010I'm having trouble with the keyboard on the Packard Bell EasyNote R4. I'm using the standard xorg driver that gets configured by the Debian Lenny installer and the problem is that the keys sometimes generate weird keycodes or something, causing unwanted behaviour of the window manager (XFCE 4.4) such as creating a new terminal window or shading windows. Could the keyboard be faulty or does someone know of a driver that would work better with this model?
View 4 Replies View RelatedUbuntu Networking :: Wired Connection On Packard Bell Easynote Not Working
Jan 17, 2010My brother installed Ubuntu 9.10 on a Packard Bell Easynote NJ65. He has a wired home connection, which seems not to be working now. It was working with the same machine under Vista. What are the first places I should look? Any hints or clues or people with similar issues would be most welcome.
View 7 Replies View RelatedUbuntu Multimedia :: Packard Bell KAV60: Builtin Mic Produces No Sound?
Jul 12, 2010There is an issue with built-in microphone on the KAV60 laptop - it produces no signal to apps. If I plug in external mike - it works fine.
lspci shows:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
Adding various options "model=..." for snd-hda-intel ALC272 does not help (ALC272 is returned by "aplay -l"). What else could I try?
Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36
Nov 7, 2010I'm using a Packard Bell Easynote Tn36 laptop, and I'm having trouble with Ubuntu 10.10 and the wireless network card, (probably because of lack of driver). I.e. it is disabled.
How can I enable it?
I input this code:
And here is the output:
Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36 - 11.04
May 1, 2011I have Packard Bell easynote tn36 and I used to use ubuntu 10.10 and then when I upgrad it to ubuntu 11.04 the wireless doesn't work (disable) and I can't press the botton of Enable wireless.
View 9 Replies View RelatedHardware :: Enable A Touchscreen On POS Device IBM 4840?
Jul 28, 2010I am trying to enable a touchscreen on our POS device IBM 4840, but it does not work for any reason. Here is what I have in xorg.conf.
Code:
Section "InputDevice"
Identifier "touchscreen"
Driver "elographics"
[Code].....
I also tried to change ttyS4 to all available tty (0-7), because I am not sure which tty the touchscreen is connected to.
Software :: Touchscreen Drivers For Mandriva 2008 - Touchscreen Working With Windows
Feb 18, 2010I have a touchscreen (DELL model)which is working with windows xp (with windows drivers for touchscreen installed). but i want to use mandriva 2008 on the touchscreen, which requires drivers of mandriva 2008 only. I have been trying very hard but in vain.
View 3 Replies View RelatedOpenSUSE Hardware :: Easiest Way To Install All-in-one Device From Hewlett Packard
Jun 11, 2010what is the best/easiest way to install a all-in-one device from Hewlett Packard (hp)?Is there a way/makes it sence to set it up via Yast? I do not know why this wiki.How to set-up a HP printer - openSUSE.shout be "obsolete" (at least not for all-in-one printers).And for "only" printers: Is there an other way including bidirectional communication (ink etc.?).
View 9 Replies View RelatedOpenSUSE :: How To Disable System Bell For All Applications
Sep 2, 2010I've searched all over Google and searched the forums and I have not been successful in finding out how to disable the System Bell (Beep) computer-wide. It's annoying hearing this extremely loud "BEEP" when I hit backspace one too many times, even when my sound is muted. People look at me like I'm crazy. Even if I try to backspace a non-existent character in my Google Chrome browser, I am struck with a crazy Error Beep. Long story short, how do I disable the System-wide "System Bell" ("BEEP") permanently? I'm on OpenSuse 11.3 using the KDE 4.4.4 Desktop.
View 9 Replies View RelatedOpenSUSE :: Cant Get Touchscreen Working
Oct 13, 2010Had it working in Ubuntu and now Ive switched to openSUSE and loving it! Much better than Ubuntu. But I cant get the touchscreen working. Please help...Ive tried to get it working but assume I have done nothing please. Im semi-intelligent when it comes to linux but most of my experience has come from Ubuntu.Im kernel 2.6.34-12 and using openSUSE 11.3 (32 bit)
View 3 Replies View RelatedOpenSUSE :: Right Click Emulator For Touchscreen?
Nov 13, 2010i did some investigation and came accross mouseemu. however it seems like mouseemu is no longer part of the suse repositories. also its just available for ppcis there any way to have a behaviour like ctrl+click + rightclick?
View 8 Replies View RelatedOpenSUSE :: Install The EgalaxTouch Driver To Get Touchscreen Working
Dec 2, 2010I am trying openSUSE 11.3(KDE desktop) for the first time (also my first time with a linux OS). But i am trying to install the EgalaxTouch driver to get my touchscreen working. I have tried all the things from this topic: openSUSE 11.3 and eGalax TouchScreen but everytime i try to run the install.sh i get these errors no mather if i am directly logged in as root or using sudo in my command line:
I am busy from monday installing all kind of touchscreen drivers but they all won't install propperly (just like the original drivers they need the Xfree86-devel but i can't find it for openSUSE).
OpenSUSE Hardware :: Acer T230H - Quanta - Touchscreen In 11.2
Jul 19, 2010Had a heck of a time getting the Acer T230H touchscreen monitor to work on OpenSuse 11.2. I am documenting this for anyone else looking to get this working.
There are plenty of sites out there with information on getting this working on Ubuntu but none specific to OpenSUSE.
PREREQUISITES:
Make sure xorg-x11-driver-input is installed as need the evdev driver in /usr/lib/xorg/modules/input/.
Code:
1. Download and compile the 2.6.34.1 or higher kernel from The Linux Kernel Archives. See instructions here for compiling kernel.
When you run make menuconfig be sure to module"Quanta Optical Touch". Navigate to Device Drivers:HID Devices:Special HID Drivers:Quanta Optical Touch. Put a "M" for module.
Save config file and build kernel as per instructions in link above. hid-quanta.ko driver should be located in /lib/modules/2.6.34.1/kernel/drivers/hid/ if module was installed correctly.
2. Once you build the kernel and boot up with the new kernel follow the instructions below:
Edit /etc/udev/rules.d/69-touchscreen.rules
Add the following rules at the top:
Code:
Create or modify /etc/X11/xorg.conf with the following info:
Code:
If this is good you can test your touchscreen which should now be working. Be sure evdev driver is specified in xorg.conf and not hidtouch.
Hardware :: Touchscreen Monitor On Dell Laptop With OpenSuse 11.1?
May 9, 2010I'm running OpenSuse 11.1 with a Dell Inspiron 6400. I just bought a Medion Multi-Touchscreen-Monitor cos they were going cheap at the local supermarket. It says the touchscreen works with Windoze 7 only, but I thought its worth a go as I have 30 days to try before taking it back.
The monitor output works fine. I had to adjust the resolution setting but that's okay. However, when I plug in the touchscreen usb lead I've no success yet. I tried all the touchscreen Vendor/Name options in Yast->Hardware->graphics card/monitor but to no avail.
My dmesg output is:
Quote:
usb 4-1: new full speed USB device using uhci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
usbhid: timeout initializing reports
[Code]....
Fedora :: Can I Run M Visio In System
Nov 23, 2010Can i run M Visio in linux ?? how?
View 1 Replies View RelatedGeneral :: Visio Alternative In System / What Is This?
Jun 11, 2011What is the Visio alternative in linux if there is one?
View 6 Replies View RelatedFedora :: Source Software That Can Open MS Visio Files?
Feb 8, 2011Is there any open source software that can open MS Visio files?
View 8 Replies View RelatedSoftware :: Openoffice.org Plugin Or Filter For Visio Type Files?
Mar 28, 2010From MS-Word, there are certain graphics that one can create that feature linked boxes of text (I think they're referred to as smart graphics, or something). There's another MS program called visio that also creates these type of graphics. When I tried to open a docx file that had one of these graphics in it with openoffice.org (I'm using version 3.1 from debian backports on my lenny system), it was unable to read it. Is there a plugin or filter that I can add to openoffice.org to give it this functionality? If not, is there another program that reads these files?
View 2 Replies View RelatedHardware :: Hewlett Packard DM4 WiFi - Card Did Not Appear To Work And With Store Alarms Going Off
Feb 20, 2011I just tested a HP DM4 in a computer store with a Mint DVD live boot disc and the laptop worked well with one exception that gives me Sony shivers (going back a few years with serious incompatibility in certain wifi cards). The wifi card did not appear to work and with store alarms going off (nothing to do with my tweaking bios settings honest) I didn't have time to run any console commands to investigate the wifi card.
View 1 Replies View RelatedUbuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedCentOS 5 :: Computer Bell Isn't Working ?
Nov 17, 2009The computer bell isn't working on a CentOS machine. I know it isn't a hardware problem. I tried "xset b on" and "xset b 100", which is the only thing I can think of.
View 6 Replies View RelatedSlackware :: How To Turn On System Bell In XTerm
Apr 11, 2010I'm trying to turn on the system bell (pc speaker) in xterm. I have the bell working in console (text mode, not under X), and with X running, even firefox can use the pc speaker (it beeps, when I enter a search term which is not found). Only xterm doesn't seem to work.
Here is my xterm config, and the xset command I'm trying to use to turn the bell on:
-------###--------
xterm*renderFont: true
xterm*faceName: Terminus
xterm*faceSize: 12
xterm*loginShell: true
!xterm*Geometry: 102x48+0+0
xterm*Geometry: 102x48
xterm*scrollBar: false
xterm*background: black
xterm*foreground: white
!xterm*highlightColor: red
xterm*charClass: 46-47:48
xterm*visualBell: false
-------###--------
xset b on
xset bell 100 1000 1000
-------###--------
If I run xterm with the +vb option, it doesn't help either (I'm testing it with printf "a"). What am I missing? How can I make xterm use my pc speaker as bell?
Fedora :: How To Change Volume Of Terminal Alert Bell
Oct 14, 2009How do you change the volume of the terminal alert bell in F11? (the sound you hear when you press the tab button). I turned the sound all the way down and muted the "Alert volume" in System>Pref>Sound but I still get a deafening bell sound whenever I press the tab button.
View 8 Replies View RelatedUbuntu Multimedia :: How To Turn On System Bell / PC Speaker
Mar 2, 2010This is for all of you who are having problems getting sound out of the PC Speaker, as far as getting the system beep or system bell. In Karmic (9.10), a change was made to get rid of the system beeps and disable the pc speaker. Unfortunately for people who liked (or more likely need) the beeps, the changes occurred in multiple places and are not that easy to find. The pc speaker and beeps were disabled in response to this bug. I believe there were other bugs dealt with here because not everything that was done seems to be covered, if that makes sense.
This bug was created in response, in hope of getting the beeps turned back on. This post by one of the developers has some pretty comprehensive instructions for getting the beep back on. I want to note right now, that I did not have to apply his patch to get the beeps back on where I wanted them. It may already have been included in an update, or was obviated by something else I did. I realize this is pretty fragmented, and you may or may not want or need to go as far as I did with this. When I get a chance to do a new clean install of Karmic (maybe in a vm or something) I intend to go back over these instructions and try to create a synthesis of them that should work for certain. If I can, I'll figure out a way to script it.
One other thing I should point out. I didn't get the bug where I had to reload the pcspkr module on every boot, so that must be fixed. (I did have to remove it from the blacklist so it would be loaded on boot, but I didn't have to kill and reload it or add it to rc.local like some people did in those descriptions). I also did not get the bug of an endless loop of beep sound or multiple beep sounds, but that only happened to people who followed the directions to change the system beep to another sound.
Ubuntu :: Enabling Terminal Bell - Deactivated Or Muted
Apr 15, 2010I've recently installed Xubuntu Lucid Beta2 on my new laptop. But I'm unable to turn the bell back on. The 'pcspkr'-module is removed from the blacklist and is loaded. However, 'alsamixer' doesn't show me any volume-options for the beep. However, 'echo -e "a"' still doesn't make a sound. I've installed the 'beep'-package, and it works, thus I am assuming that the hardware-bell itself does WORK fine. It's just deactivated/muted somewhere, and I can't find the option to turn it back on.
View 3 Replies View RelatedGeneral :: No Log-in Sound And Command Line Terminal Bell In Gnome / Fix It?
Jul 27, 2010I recently replaced (fresh install) Fedora 12 by 13. Surprisingly I noticed there is no log-in sound for Gnome and also when I use command line terminal there is no terminal bell in spite of the fact that I checked the "Terminal Bell" option in the EDIT --> Preferences menu! I checked the speakers are not mute, I can play music. Any idea how to fix it?
View 2 Replies View Related