OpenSUSE Hardware :: Vga Driver No Detected On Dell Desktop
Aug 3, 2010
I have installed opensuse11.3 on my dell desktop. I get the gui with only 4 or 8 bit colors. I have resolution 0f 1024x768, which I have given at installation time. I cannot change it any more. I have followed your SDB:Configuring graphics cards - openSUSE guide. here is my lspci output
[code]....
I have tried to configure the xorg with command Xorg -configure. I surprised that it cause Segmentation fault. I have captured the Xorg -configure command in strace. I am pasting here certain last lines, I cannot paste the whole output because it is too large.
[code]...
View 3 Replies
ADVERTISEMENT
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
May 4, 2010
I use OpenSuse 11.1. My graphic card is an intel Q43/Q45 chip. I was instructed to update my xorg and mesa packages in order to make on application work (it was crashing my x server). After I did so, x wouldn't start:
intel(0): No kernel modesetting driver detected
Screen(s) found, but none having a usable configuration
Now I am stuck with vesa if I want to have x running at all. I tried reverting to the versions of mesa and xorg I had before, when everything worked, but to no avail.
What can I do? (I am by no means an expert and that I don't know linux very well, and even less openSuse... just has to use it at work....)
View 9 Replies
View Related
Dec 9, 2009
i am testing the opensuse 11 installation on the Eee pc (Eee Box B202). My installation source is in the network drive but i can't seem to point it to this destination because the network card is not detected. This Eee pc is using a jmicron network card and i can't seem to find any related drivers on the net.
View 1 Replies
View Related
Apr 30, 2011
I'm running a hybrid graphics card (AMD Radeon HD 6630m) so naturally I'd like to have full functionality between the two.
Here's what I've done so far:
Downloaded the .run file from AMD's website
Built packages for both AMD and Intel side of the card
Unpackaged said packages
I used ATI Catalyst's GUI to install (in hindsight terminal might have been better and more informative) and it is now saying
After installation of the generated package, it is important to save your X Window configuration file, and then run 'aticonfig --initial' (in a console window) to complete the basic configuration, please run aticonfig from a console window or AMD CCC:LE from the Desktop Manager Menu
So how and why do i save my X Window config and when I give the aticonfig command it says no adapters detected
View 9 Replies
View Related
Sep 14, 2010
I am trying to install OpenSUSE 11.3 on a Dell T3500 Desktop machine. The configuration (related to the problem) of the machine is as follows:
Intel Xeon CPU W3520, 4GB RAM
Intel 82801 SATA RAID Controller
Samsung HD161GJ 160 GB SATA,
Optiarc DVD+-RW AD-7230S
When I try to boot from the OpenSUSE 11.3 x86_64 DVD, I get a curses based screen which says, "Make sure that CD number 1 is in your drive." (with OK and Back buttons). On pressing Back and trying to install again, I get an angry red dialog, which declares, "No repository found."
I tried connecting an external USB DVD drive and then booting from it, then this problem did not come and the install went to start the GUI. But then it could not find the (rather any) hard disk!
We have a set of these identical machines and the problem is fully repeatable on all of them (I tried downloading and burning the DVD image again, that didn't help). The same machines have OpenSUSE 11.1 and 11.2 installed on them and there was no such problem installing those.
View 8 Replies
View Related
Jun 27, 2010
I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else.
View 3 Replies
View Related
May 4, 2011
ISSUE SOLVED: FOUND SOLUTION ON LINUX MINT COMMUNITY[URL]... The solution is for debian, but it worked for me on Kubuntu 11.04. I just installed Kubuntu, and my wireless is not getting detected. I tried a variety of solutions I found online, but none worked. It worked perfectly for Ubuntu Gnome.
When I tried installing the Broadcom drivers in the "Additional Drivers", I got an error that the driver could not be installed.
[Code]...
View 3 Replies
View Related
Oct 5, 2010
I just got a new laptop, and installed fedora 13 on it. I have had no major problems, until i tried to hook up a external monitor. It does not show up in the gnome-display application, and the keyboard switching button combination (Fn+f#) does not work. On my past laptop, this worked fresh from the install, f8->f10->f11.
System:
Dell Latitude E6410
nVidia Corporation GT218 [NVS 3100M] (rev a2)
Code:
$ yum list installed | grep nvidia
kmod-nvidia.x86_64 1:256.53-1.fc13.4 @rpmfusion-nonfree-updates
kmod-nvidia-2.6.34.7-56.fc13.x86_64.x86_64
nvidia-settings.x86_64 1.0-6.fc13 @rpmfusion-nonfree-updates
[code]....
PS: is there a way to make it so that a box as above is contracted, requiring a click to expand?
View 3 Replies
View Related
Oct 6, 2010
Installed fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
View 1 Replies
View Related
Aug 7, 2010
I have spent many time searching for my prob but couldn't solve it. i installed ubuntu 9.10 recently. the problem is that my integrated webcam and microphone are not being detected. i tried cheese, camorama webcam viewer and skype.. its like that webcam drivers are not installed. and i couldn't find any drivers.
camorama gives the error: could not connect to video device(/dev/video0)
cheese also says No camera found!
reading other threads i found that lsusb comand output might help so here is its output.. code...
View 1 Replies
View Related
Jan 26, 2011
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies
View Related
Aug 25, 2010
This is my problem, I want to install debian 5.5 Lenny stable (2.6.26-2-amd64) on our new Dell PowerEdge T610 with a PERC controller H200
but nothing to do, the default Debian installer does not detect it. After more research, the module that I must load is "mpt2sas" and after normaly my hard-drive will be detected I'm going on the Dell site, there are only drivers for RedHat and Suze distribution .. I still try to install rpm packages but without success!
View 2 Replies
View Related
Oct 19, 2010
Checked the sticky and ran the lspci, the result is this:
Looks like the wireless is not listed
View 1 Replies
View Related
Jun 14, 2010
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies
View Related
Dec 14, 2008
I installed Ubuntu 8.04 on a Dell Inspiron 1420 laptop. All went good. But, the webcam was not recognized. I didnt see any packages to activate the Webcam. What should I do now.
View 1 Replies
View Related
Mar 24, 2011
I just updated to new 2.6.38-18 kernel and headers. Now the latest Ati 11.2 driver wont install completely and I cannot get any X. So I removed the ati drivers to use the opensuse drivers but kde wont start now (dont know what the issue is.. maybe someone can poitn me out the the correct log file to look for errors).. I am using gnome now. Anyone knows how to get ground this and install ati drivers.
View 9 Replies
View Related
Mar 27, 2010
Yesterday I got the wireless up in running in my Macbook Pro 4,1 but still have no sound, the keyboard isn't fully supported (volume controls, brightness, ect.) and I haven't been able to get the eye-candy to work. I'm running openSUSE 11.2, and I've already installed the nVidia proprietary drivers, but every time I turn on desktop effects it turns it off as soon as I close the dialog box.
View 5 Replies
View Related
Jan 4, 2011
today my windows crashed and i decided to move into Linux.But here comes my biggest problem now, i cannot connect to wireless network but i am able to connect through wired connectionmine is a 10 year old computer so i think the card used is Intel PRO/Wireless 3945ABGi am using Fedora 14. please note that i know only very little in Linux so please respond accordingly
View 14 Replies
View Related
Mar 18, 2011
Ethernet is not detected with the following setup:
OS: Debian Lenny
Laptop: Dell Latitude D600
Ethernet adapter: Broadcom 57xx Gigabit Integrated Controller
Wifi adapter: Broadcom BCM4309 802.11a/b/g
Have done the following troubleshooting suggestions from around the www:
LAN controller is enabled in BIOS
dmesg | grep eth0 returns nothing
lspci -v | grep -i net shows wifi adapter but no ethernet adapter
ifconfig -a does not show eth0
ifconfig eth0 up confirms ERROR while getting interface flags: No such device
Have done lsmod, but not sure what I should be looking for.
I would post lspci, dmesg or any other output, but as the adapter is not being detected, I have no network/internet connection from that laptop, have only one other Windows based (at this stage) laptop that I am using to write this message, and so would have to type out the output manually.Adapter indicators are both on when laptop is powered up. Am unsure if the ethernet adapter has somehow gone to sleep, and if so, unsure how to wake it.Perhaps the ethernet adapter is defective, but am hoping to confirm this before looking for a workaround/replacement.
View 14 Replies
View Related
Oct 24, 2010
I love openSUSE (using 11.2). I have it installed on a Dell Dimension 2400 (2.4G Celeron CPU, 2G RAM), but I have a huge problem. It will randomly freeze during operation. I'll be able to move the pointer with the mouse but unable to click anything and I have to hold the power button down to shut it down and restart. The problem seems independent of the program I am using or what I am doing with the machine. I have not been able to recreate the problem. One more detail. The same problem occured when I had Ubuntu 9.10 installed on the same machine
View 9 Replies
View Related
Dec 24, 2009
When I first installed openSUSE 11.2, it has no xorg.conf of course, but it detected the subject card and loaded radeon instead of radeonhd. When I used Sax2 to create an xorg.conf for a problem, I noticed that it for the device it created:
[Code]....
When I rebooted with this xorg.conf, lsmod says that it's still radeon that is loaded:
[Code]...
I know that radeonhd does cause some issues with KDE desktop effects, but according to Radeon - openSUSE, the cards above X1900 should be using radeonhd. Instead of either of these, should I try to use the ATI driver fglrx? It seems from my gleaning of forum posts that these have some problems, but I am having some desktop effect issues that maybe would be addressed with that driver.
View 4 Replies
View Related
May 9, 2011
Since 11.4 I am having troubles with getting the correct config on my desktop.I am using a laptop, which means a lot of switching between various monitors en projectors.If I start nvidia GUI to change everything works (only as root user). But with the tool from KDE it is not possible to detect any other display than the one from my laptop. It is complaining about randr.However. Nvidia works fine, but I hat it to restart X every time etc. I am using an Xorg with nvidia tool which is not preferable in 11.4.
View 4 Replies
View Related
May 17, 2010
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies
View Related
Feb 1, 2015
I'm having problem in installing debian 7.5.0 on Dell Power Edge R 470 1U Rack Server ( Not Sure If am using RAID 1 ) whereby the hard drive is not detected. This server is running 2 Proc/2x1.2 SAS HDD . The installation went ok until i reached into partition section whereby the drives is not there to be selected , throwing an error " No disk drive detected , Driver needed fro your disk drive "
I've tried to use debian-7.8.0-amd64-DVD-1.iso
My server details:
Dell Power Edge R 470
32GB RAM
2 x 1.2 TB SAS HDD
View 4 Replies
View Related
Jan 12, 2010
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies
View Related
Sep 8, 2010
Where can I find a driver for a Prestige Desktop Hard Drive for use on Linux (OpenSUSE 11.3)?
Where should I look, in general, for drivers for this OS?
View 4 Replies
View Related
Jul 17, 2010
im on compaq presario cq40 (amd64 turion x2) and recently install ubuntu.10.04 using wubi with dual os.. im installed wireless braodcom BCM4312 802.11b/g LP-PHY 'bcm43xx-fwcutter_006-3_amd64.deb' driver for my laptop and restart my machine.. when i go to > hardware dirver, there is no driver installed.. any suggestion? or lists any driver compatible with my laptop..
View 1 Replies
View Related
Aug 22, 2010
I'm having a problem with getting the VGA out to work on my laptop. I have a Sony Vaio F series running Fedora 13 64bit with an Nvidia 330M on driver 254.44. Quite simply, the VGA out is not detected although the HDMI out is. how to correct this?
View 2 Replies
View Related
Feb 23, 2010
Does anybody know if there is a driver for the dell 946 printer?
View 1 Replies
View Related
