OpenSUSE Hardware :: Second Screen Fails In 11.4 (but Works Just Fine In Ubuntu)
Apr 11, 2011
System:Tri-head, dual-card: GeForce 9500 GT, GeForce 8400 GS
Dual-boot: openSUSE 11.4, Ubuntu Natty
Driver: nvidia proprietary (260.19.44 in openSUSE, 270.30 in Ubuntu due to kernel version)
xorg.conf: same for both
Results: All three heads work just fine in Natty; secondary screen fails in openSUSE:
Code:
[25.164] (EE) NVIDIA(1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please
[25.164] (EE) NVIDIA(1): check your system's kernel log for additional error
[25.164] (EE) NVIDIA(1): messages and refer to Chapter 8: Common Problems in the
[25.164] (EE) NVIDIA(1): README for additional information.
[25.164] (EE) NVIDIA(1): Failed to initialize the NVIDIA graphics device!
[25.164] (II) UnloadModule: "nvidia"
[25.164] (II) UnloadModule: "wfb"
[25.164] (II) UnloadModule: "fb"
But nothing is jumping out at me in the output of dmesg. I also don't see any additional system or kernel logs in /var/log. I'll google some more on that front. One other fun fact: nvidia-settings fails to run in openSUSE. Unless I launch it under gdb. Then it starts up and runs as expected. (And the second screen ain't there, as expected.) Here's (what I think are) the relevant items:
Xorg.0.log - Pastebin.com
dmesg - Pastebin.com
xorg.conf - Pastebin.com
Additional output available upon request.
View 6 Replies
ADVERTISEMENT
Dec 10, 2009
I have just installed OpenSUSE 11.2 on an Intel DQ35JO motherboard and XFX 9500GT 512MB video card. After installation the desktop looked fine on the Sony LCD TV I have connected to the 9500GT via a DVI to HDMI cable.
After the first reboot after installation I added the Nvidia repository via the add community repository function in the software sources option in YaST2. I then proceeded to install the Nvidia G02 drivers and the nvidia-settings package. At this point after a reboot I would get a blank screen. Hitting ctrl-alt-F1/F2/F3/F4/F5/F6 has no effect, I could not get any of the virtual consoles to appear. I had to SSH into the box and reboot into runlevel 3.
Once I had rebooted into runlevel 3 I logged in as root and executed "sax2 -r -m 0=nvidia" and got an error message that the configuration server could not be started. I tried executing "sax2 -r -m 0=vesa" and received the same error:
[Code]....
View 9 Replies
View Related
Aug 5, 2011
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
View 5 Replies
View Related
Feb 14, 2011
I have an Acer Aspire One AOA110 (SSD version that came w/ Linpus Lite) that my brother gave to me several months back when it stopped working. I've been trying various ways to revive it or make it useable, but haven't had any luck so I figure it's time to look to the community for ideas. I have already updated the BIOS to the latest (v3310) version, so I don't think it's the common issue these netbooks have where they don't even post. I'm kind of thinking the GPU died halfway or something. If I could just get it to work in a command line only mode, I'd be happy.
The netbook will post fine, but when I try to boot into Linux, the screen will go blank part way through the boot process. I don't ever remember hearing sound afterwards so I don't know if just the screen is blank or if the computer is locked up as well. I have tried several distros, but all of them seem to run into the same issue. Some with text based installers (Debian) get all the way through the install, but won't get all the way through the boot process. I'm only trying to get to a command line, not into X or anything graphical. Arch Linux also uses a text based installer, but I couldn't even get into the installer before the screen goes blank. I've tried changing some of the kernel options such as nomodeset, vesa and framebuffers options, but didn't have much luck with them either. I've also tried some older versions of Ubuntu (I think back to either 8.04 or 8.10) and tried the text installs, but I can't remember if I couldn't get into the installer or if I just couldn't boot, I want to say I couldn't even install. Mind you it's not random, it's always at the same point for a particular distro.
So the other small twist to this all is that FreeDOS works fine, besides not being able to get the sound card or network card working. I can play games, set different resolutions in ZSNES, etc. This seems a little odd to me, but I'm hoping it makes perfect sense to someone reading this.
I want to be able to run Linux with a command line interface, but I can't find the right distro/settings/whatever that it stays in the video mode (vesa?/framebuffer only?/I'm not even sure what to search for) where I keep the display and get to a command line. Any thoughts on what's happening when the screen goes blank or what I can do to get Linux working on here again?
View 4 Replies
View Related
Mar 28, 2010
I have to hold a presentation using a projector in a few days and I have to bring my own laptop, so I tried hooking up a second monitor to test if it works. As it turns out, the second monitor works fine, but then my main screen is messed up. I'm using Ubuntu 9.04 and I'm doing this on a HP Pavilion DV4000 laptop. My main screen shows just the bottom (cca) 400 pixels of the wallpaper, no bottom panel, no desktop icons. And I'm kind of scared to remove the second monitor now cause I don't know what I'll do if I don't get the main screen back.. Well, other than installing 9.10 beta that is..
View 4 Replies
View Related
Jan 10, 2010
I have downloaded the recommended NVIDIA driver for my Quadro FX 1400 graphics card which has 256 MB RAM. I have my laptop in a docking station and from the docking station is a DVI to HDMI converter then HDMI cable to my TV (the idea is to use it as an internet TV slave! ). When I come to configuring the NVIDIA X Server, it correctly detects both my laptop screen and my TV via the HDMI connection. However, when I come to save the settings for the X server and go to restart it, it cannot save the configuration file. This is most annoying as it does not allow me to use the dualview I need.
The second problem comes when I use something like the BBC iplayer or anything that uses the flash player. I have the latest flash player with Firefox which works fine in non-full screen mode. However, when switching to full screen, the CPU load jumps to 100% and the playback is really jerky. Had this running the beloved windows XP before and could handle full screen no problems. I have seen a few posts here which show workarounds to zoom in on the small screen on Firefox but would prefer to run it in the full screen mode.
View 2 Replies
View Related
Feb 10, 2010
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies
View Related
Mar 30, 2010
On my Acer netbook (AOA-150-1635) the wireless works fine with WinXP, Ubuntu, and used to work with Suse 11.1. I replaced the Suse 11.1 with a clean network install of Suse 11.2. I couldn't get the wireless to work and did another network install using the wireless. When the install was completed I could not get the wireless to work with Suse 11.2. When I run the "collectNWData.sh" it shows--
!!! CND0120E: Network card wlan0 has no IP address
wlan0 Interface doesn't support scanning : Network is down
[code].....
I looked up error CD0120E and changed the network devices setup to "traditional". The wireless "scan" picked up the routers and I added the encryption keys. Still no joy. I ran "collectNWData.sh" again and it said it is better to use the Network Manager.
!!! CND0180I: The system can't ping external IP address 195.135.220.3
!!! CND0150E: There might be a problem with the default gateway definition 10.1.1.1 on interface eth0
[code]....
Going back to Yast, Network Devices, I set Network Manager. The result is that it is back to the beginning with "collectNWData.sh" giving the original error.
View 9 Replies
View Related
Jan 30, 2010
I just installed 11.2 kde desktop everything works fine except no sound when I play ..... and watch movie online worked with my audio and video files in my computer only
View 1 Replies
View Related
Sep 2, 2011
I am unable to connect to a WEP-protected network. the Network manager log shows either a DHCP timeout, or a failure to associate. (attached below).Changing to WPA is not an option, as the network is not controlled by me. This is with the rt61pci driver for a Ralink 2500 series chipset.(Rosewill RNX-G300EX card)Manually forcing an IP does not result in a connection either. This is with the latest OpenSuSE 11.4, all patches applied. Router is a D-Link DIR-613, and I know the passphrase I'm using is correct because it connects both on my Android (what else?) phone, and my lappy when I boot XP.
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection state: associating -> associated
Sep 2 11:12:02 Core2Duo-2400 NetworkManager[2160]: <info> (wlan0): supplicant connection
[code]....
View 7 Replies
View Related
Oct 13, 2010
Just had to replace the hard drive on my wife's iPod Classic 6th Generation. Now I cannot mount the device. It works fine on Windows and Mac computers. I have tried formating it on both Windows and Mac, I've done restores through Itunes on both. Here is what I get in my /var/log/messages
Code:
kernel: [84412.470389] scsi10 : usb-storage 1-5.3:1.0
kernel: [84413.477317] scsi 10:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
kernel: [84413.477445] sd 10:0:0:0: Attached scsi generic sg7 type 0
kernel: [84413.500917] sd 10:0:0:0: [sdf] Spinning up disk....ready
[Code]...
View 2 Replies
View Related
Feb 22, 2010
I'm using 11.2 with KDE.
I can connect to the Internet on my WLAN just fine (using Opera) and can dload torrent files (using the same).
However, I have had trouble accessing some community repositories in the past, cannot synchronise with an NTP server (annoying since my battery is low and time and date are reset most reboots) and cannot use the lyrics function or Wikipedia function in Amarok. Nor can I connect to the net using Firefox (though conqueror works just fine...) I cannot download torrents on KTorrent either.
It seems that there is some sort of 'permission'/connectivity issue.
View 8 Replies
View Related
Mar 30, 2011
I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?
View 7 Replies
View Related
Apr 28, 2011
I am running my wifi using YAST and IFUP. The card is a zd1211, and works just fine. However lately I have have to "start" it manually after booting. The only way I have found to do this is to open YAST >network settings> and "edit" the card, but NOT change anything, just click through the next buttons and it connects. I have tried using the settings "on boot" and "on hotpug" but always when I reboot, I have to go through the YAST rigmarole. This is a PITA. I am trying to avoid NM as I want to sort this out, not cover it up with more software.
View 4 Replies
View Related
Nov 7, 2010
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies
View Related
Aug 23, 2010
today I have updated OpenSuse 11.2 to 11.3. When the system boots I can see BIOS output and selftest. After GRUB is passed the screen goes black, but boot process is continued to "init 3". SSH and all daemons work fine. I get a screen on the remote inside board, but no output on the attached LCD (Graphic: ATI ES1000 on board). I seams that output is redirected to "Remote Inside Board" only. how to switch output back to screen?
View 9 Replies
View Related
Mar 30, 2011
Basically i set up a webserver using this tutorial but installed ubuntu 10.10 [URL]
im using charter cable and it has that ubee router. when i tried to set up the static ip the closest thing i saw was an option called static ip lease in which input my servers local address and mac address and checked enable. then i applied dmz to my servers local ip. after that i typed in my public ip and to my excitement it worked. so i began creating the website. i dont know if all that is relevant but just in case i didnt want to leave anything out. this is my first time with linux and servers and ive only been at it for about 5 days. anyways i made the website and everything was going good then i needed to reboot the server so i did. after reboot i logged into the server then went back to the other room where i worked on the server using putty from a pc and flashfxp and tried to navigate to the website in firefox. it didnt work. if i try to go to the website address from a computer on my network i get a problem loading page error from firefox and if im on a different network it shows my router page to login and configure. i dont understand how it was working then after reboot it all of a sudden doesnt.
o also i installed gnump3 today before reboot if that is important
View 1 Replies
View Related
Oct 5, 2010
This has been bugging me for quite a long time. I need to have a pptp connection to my university. I have tried to locate the error, but this has been a real trouble.
A little bit of history: My girlfriend had a laptop with M$ vista on it with a working PPTP connection. I had a laptop with Ubuntu, with which I couldn't get the PPTP working.
When my laptop crashed, I bought a new one on which I run a dual boot XP SP3 and Ubuntu. I also own a desktop (Dual M$ Win 7 / Ubuntu standard Karmic) and my girfriend also upgraded to Win 7.
Currently, the XP version is the only one on which I can get a connection. Both Ubuntu and the Win 7's give me a GRE proc 47 not received error. I know our router (a DAVOLINK DV2020) is notorious for not sending through GRE proc 47, but this either shouldn't be the case or it shouldn't matter, since I can make a perfect connection through the XP OS.
This is quite a handicap, since we both study at the university for which we require working VPN PPTP connections.
Settings:
Gateway: vpn-eur-pptp.eur.nl
Username: 123456ab@eur.nl
Password: password
Authentication: MSCHAP / MSCHAPv2
[Code].....
View 3 Replies
View Related
Mar 18, 2010
I've got 9.04 and 9.10 both installed on the same machine. The /home directory is on a separate partition, so both OSes use the same /home.I can't get Compiz to work at all in 9.10, even though it's been perfectly fine in 9.04. Is there a backport of some sort that i should install?The fixes I've found all point to editing the xorg.conf file, but of course, Karmic doesn't have an xorg.conf file.I've tried reinstalling the Compiz files, reinstalled the open-source video drivers, installed/uninstalled fglrx drivers a few times, rebooted dozens of times.
View 8 Replies
View Related
Nov 14, 2010
Though I had solved this but I was premature. Here are the details. When I use HDMI to connect to my lcd TV it works fine in Windows7. (I have dual partitions W7/Ubuntu),but when I boot into Ubuntu and use HDMI, nothing happens.
lori@lori-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
also when I open the Gnome Alsa Mixer, under the HDMI tab, there is just a blank screen. I believe I have the latest Alsa releases.
View 4 Replies
View Related
Nov 16, 2010
I have a working LDAP-server (I belive!!) I want my laptops to authenticate against the server, when they logon. That works fine as long as the network is present. But I also want the users to be able to log on, when the network is down. When I go to a terminal (without network) I can su to another LDAP-user.I can login via graphical login-screen with the network attached, but not when it is disconnected.
In a terminal id john gives me information about the user john.
My conf. files looks like this:
/etc/ldap.conf
host 172.16.0.138:389
ldap_version 3
bind_policy soft
[Code]...
View 1 Replies
View Related
Dec 3, 2010
My Windows machine can ping Ubuntu by name, but Ubuntu can only ping the Windows machine by using it's IP address. This was working fine in both directions until I purged Samba. After purging Samba, I couldn't ping in either direction unless I used the IP address. I did some reading and found that Samba provides NetBIOS functionality that allows the machines to resolve host names without a DNS. Since I'm not running a local DNS, I decided to reinstall Samba. Unfortunately, I've not been able to restore it to full working condition. I don't want to use hosts files as all the IP addresses are assigned automatically by DHCP. I want to be able to access the Windows machine by name.
View 9 Replies
View Related
Dec 15, 2010
I have Ubuntu 10.10 installed for some time now and I don't boot my Win7 machine in weeks!I love how solid, robust it is... and also how good it looks.Love the features like Ubuntu One (use it a lot!) and the Software Center. I'm 95% converted and I would be 100% if it weren't for 2 issues:
1 - The machine won't shutdown. Rebooting works fine but shutdown it just hangs... Kinda sucks having to press the Power Off button every time...
2 - I'm on a laptop but it doesn't recognize my battery. All I get is a "electric ray" on the panel. Even if I remove AC power it still does the same... No charging information, nothing... I tried
Code:
sudo modprobe pmu_battery
on the terminal but is says that the module could not be found.
Everything else works terrific (better than Windows!) with this two exceptions...
View 9 Replies
View Related
Jun 28, 2011
I have to report that I am unhappy with the idea of taking away Gnome. I use a tablet, thus I use CellWriter. CellWriter works fine on 11.04 in Gnome but not in Unity. Additionally, CellWriter uses a system tray icon, which doesn't exist in Unity. I don't like my destop experience in Unity. It doesn't agree with the way I interact with my computer.We have Ubuntu, Kubuntu, and Xubuntu. I would like to request that we fork a Unity distro and keep a Gnome desktop for users to choose.
View 9 Replies
View Related
Nov 19, 2009
New build to F12. Sound was fine in F11. Now, massive distortion. I have tried every possible permutation of settings. With the main volume control in the top taskbar, there are two positions of level setting where the audio drops to a normal level and sounds OK but any application changing the level or starting to use the Pulseaudio changes the level and its loud and massively distorted again.
In the Pulseaudio manager->sink->alsaoutput.pci-0000-00-11.5.analog-stereo -> properties-> show volume meter, the audio is always maxed out in level. I have tried everything, its unworkable right now. Its possible to start alsamixer from terminal and adjust settings for good audio but any future change reverts to distortion. All changes in Pulseaudio Dev mgr or vol control etc change the audio as they should but do not affect the problem.
View 9 Replies
View Related
May 18, 2010
Gateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7
View 6 Replies
View Related
Oct 20, 2010
am using transimission to download torrents but when it start downloading i just can't browse anymore since my connection slows down, but when i stop downloading from transimission my connection just works fine.
View 2 Replies
View Related
Oct 27, 2010
This web page....the Java works fine...the sound does not work. I am using Ubuntu !0.10...it worked in 10.04 but not now. [url]
View 9 Replies
View Related
Dec 7, 2010
i'm running 10.04 x64, with the latest versions of google chrome, chromium, opera, epiphany, firefox, and swiftfox.
strangely, flashplayer works fine in all of them except swiftfox, where it presents a garbled, unclickable video window (tested in videos).
all my other ff addons and plugins seem to work ok in swiftfox, so i assumed that swiftfox is just reading and using everything in ~/.mozilla, including flash. but perhaps not. anyone have any idea why ff's flashplayer doesn't work in swiftfox?
View 3 Replies
View Related
May 5, 2010
I am using debian squeeze. I haven't changed much and I am a newb at this sorry. I can use the SFTP, but I can't use the FTP under any account. I can't find a conf file or anything for this.
View 8 Replies
View Related
