OpenSUSE Hardware :: Potential For Nvidia Driver With KMS?

Jul 15, 2010

I've got 11.3 going and I am mostly enjoying it. I was thrilled when I noticed that with KMS, I could see the boot process and the other vterms on my external monitor. Sadly, the nouveau driver doesn't seem to work for KWin/KDE compositing/desktop effects. Additionally, VDPAU was no go.

So, I set the nomodeset option for grub and chanked the KMS option in the sysconfig settings. The nvidia driver now works (along with composite/VDPAU stuff).

That being said... knowing I could have my external monitor work in those other areas of use is really bugging me.

I don't know much about KMS... is there any process (or if not, foreseeable future) where I could use KMS and the nvidia driver?

View 7 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Short Freeze's On Machine's With Nvidia-Card & Nvidia-Driver?

Aug 8, 2010

The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.

System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,

View 6 Replies View Related

OpenSUSE Hardware :: NVIDIA Driver From NVIDIA Repository Supports Cuda?

Jul 29, 2010

Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?

View 2 Replies View Related

OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver

Jun 13, 2011

There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.

Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.

View 9 Replies View Related

OpenSUSE Hardware :: Using The Nouveu Driver Or The Nvidia Binary Driver?

Mar 12, 2011

How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:

Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]

[Code]...

View 2 Replies View Related

OpenSUSE Hardware :: NVidia GeForce2 GTS / Pro Driver - Failed To Load Module "nvidia" (loader Failed, 7)

Feb 17, 2010

I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"

[Code]....

View 9 Replies View Related

OpenSUSE Hardware :: NVidia Old Driver Traces ?

Jan 13, 2010

I tried it on my machine, just for lols, and was surprised at the result. I have nVidia driver 195.22 installed the "hard" way (We really should stop calling it that, it is simple pimples!) but:

Code:

Or leave them alone?

Code:

Code:

Code:

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia Beta 195.30 Driver Gone?

Feb 26, 2010

I'm setting up Suse 11.2 on PC w/ an Nvidia GT 240. I used the 1-click installation, found it didn't work, then discovered this thread saying the 240 requires the newest beta driver, 195.30, which is not available yet in 1-click and has to be manually installed.

However, that driver is no longer available on Nvidia's download site, either through their menu or the direct link given in the forum thread:

Unix Drivers Portal Page [URL]

Nor do I see it in the Nvidia repository.

why it was removed? Is there a major problem with it? If not, any idea how I can get it?

And if I can find an install it, I assume I need to first uninstall the 1-click version?

nvidia-gfxG02-kmp-desktop (190.53_2.6.31.5_0.1-8.1 (x86-64)
x11-video-nvidiaG02 (190.53-9.1 (x86-64)

View 9 Replies View Related

OpenSUSE Hardware :: New Nvidia Beta Driver 195.36.08?

Feb 27, 2010

Installs the "hard way " without problems Games run quicker rendering is better Video card hier is EVGA 9500GT 1gb ddr2 standard clocking Pcie bus overclocked to 110 mhz

Where to get : [URL].. The readme gives the documentation and which chips it support

View 8 Replies View Related

OpenSUSE Hardware :: NVidia Driver Configuration In 11.2 Kde?

Jul 24, 2010

I get this error on enabling nVidia repo and downloading driver from YaST.

Code:

Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory

[code]....

View 9 Replies View Related

OpenSUSE Hardware :: New Nvidia Beta Driver 260.19.06?

Sep 15, 2010

Nvidia adress: [URL].. The new driver installed and no problems here this driver is better then the 260.19.04 with Sauerbraten and Nexzius a bit higher fps The readme gives all the cards for this driver to much to put here.

View 1 Replies View Related

OpenSUSE Hardware :: NVIDIA 270.41.19 Driver Has Been Released?

May 21, 2011

You can get the 64 bit version 270.41.19 of the nVIDIA proprietary Video Driver from this link:[URL]..

And the new video driver from nVIDIA no longer is outputting any error message when it is installed as was the case with 270.41.6. So, it is worth a try I do believe to go with the new version. I have a bash script that can be helpful in installing this driver if you would like to use it. Read about lnvhw from here: LNVHW - Load NVIDIA (driver the) Hard Way from runlevel 3

View 8 Replies View Related

OpenSUSE Install :: GUI Not Getting After NVIDIA Driver Installing In 11.3

Jan 8, 2011

I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.

HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m

View 1 Replies View Related

Ubuntu Multimedia :: Driver Showed The Nvidia 173 Driver And The Other One Showed "current" Nvidia Driver

Apr 22, 2010

i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.

after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.

View 3 Replies View Related

OpenSUSE :: Lost Fonts After Installing NVIDIA Driver?

Sep 23, 2010

I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".

After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).

If I launch konsole from a terminal, I receive the following warning:

konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.

Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.

The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+

View 6 Replies View Related

OpenSUSE Hardware :: NVidia Driver Installation - CC Not In Your Path

Feb 9, 2010

I've got, from Nvidia, the 64bit driver for my card. After typing, sudo sh <filename>, I get, cc not in your path. What do I need to do, is this a C compiler? Isn't gcc already installed by default. I just installed OpenSUSE within the hour. Totally new to SUSE, and almost new to Linux. Just trying to give several distros a trial run.

View 6 Replies View Related

OpenSUSE Hardware :: How To Build Rpm From Nvidia Source Driver

Apr 14, 2010

When we expect a new rpm from current 195.36.15 nvidia driver? And if it is possible someone to get my a link to this rpm,build for my. like step by step "How to build rpm from nvidia source driver.All this is because i don`t like to install after every update!

View 1 Replies View Related

OpenSUSE Hardware :: Install NVIDIA Propriety Driver?

Jul 3, 2010

* My Graphics card is a NVIDIA Geforce 7900 GTX. I am running OpenSUSE 11.2. I have attempted to install the Propriety NVIDIA Drivers (without success). I have added the repository to YAST, then proceeded to install the NVIDIA software.

I then proceeded to reboot my computer into "init 3" mode. I ran the nvidia-xconfig tool as described in the
openSUSE Graphic Card Practical Theory Guide for Users site I then proceeded to type "startx" and it failed to load.

View 2 Replies View Related

OpenSUSE Hardware :: Error In Compile The NVIDIA Driver

Jul 3, 2010

when i trying to install NVIDIA drivers i get compile error:

NVIDIA: calling KBUILD...
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (
echo;
echo " ERROR: Kernel configuration is invalid.";
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing.";

[Code]...

View 8 Replies View Related

OpenSUSE Hardware :: NVidia Driver Installation - AMD Chips

Oct 10, 2010

I read over the installation instructions given here. However, they make reference to two versions: openSUSE 11.3-IA32 and openSUSE 11.3-AMD64. I have a 64-bit Intel system; are these instructions only for AMD chips, or do they refer to something else?

View 1 Replies View Related

OpenSUSE Hardware :: Unable To Install Nvidia Driver?

Oct 15, 2010

i tried to go threw this by some tutorials on the wiki but without success. i all the time got this error: Nvidia log: [URL].. even if i ran the make oldconfig && make prepare command..

View 8 Replies View Related

OpenSUSE Hardware :: Can't Install Legacy Nvidia Driver

Mar 13, 2011

i tried installing the driver through the one click install (SDB:NVIDIA drivers - openSUSE) and through zipper, but system info says that the display driver is nouveau. here are my specs

opensuse 11.4
RIVA TNT2 Model 64/Model 64 Pro

View 4 Replies View Related

OpenSUSE Hardware :: Nvidia Gt440 Driver For Suse14?

May 29, 2011

install the drivers for the gt440 card. i have tried following the instructions on the SUSE web site but each time when my computer reboots i lose the display all together and all i get is a login prompt in the console,

View 5 Replies View Related

OpenSUSE Hardware :: 11.2 - Recent Upgrade Of NVidia Driver?

Jun 19, 2011

I'm using a Dell Precision M65 portable workstation, often plugged to a docking station and with an external monitor attached. The graphic card is an nVidia Quadro FX 350M. I've been using openSUSE 11.2 until recently (with KDE 4.3.5). Then, during a routine update, the nVidia driver was upgraded from version 260.19.44 to 270.41.06. Desktop effects stopped working, and even after disabling them, some applications (presumably relying on direct rendering) do not work properly. I decided then to install openSUSE 11.4. The problems remain, with the additional issue that I can't switch anymore between the external monitor and the laptop display. I've tried several options using nvidia-settings; the original configuration when the system was working was "TwinView", "Cloned".

Direct rendering is still on:
Code:
phoebe:~ # glxinfo | grep -i rendering
direct rendering: Yes
but glxgears, for instance, while giving very high FPS, produces only a black window instead of the usual rotating gears.

The problem seems similar to the one cited here:
openSUSE:Most annoying bugs 11.4 - openSUSE
However, in my case, it appears with a driver newer than 270.29, so I am not sure this is the same issue. I also tried to follow the advices given here:
SDB:NVIDIA troubleshooting - openSUSE
without success.

I also noticed that my card (Quadro FX 350M) is no longer in the list of supported cards for that driver (the closest I could find is Quadro FX 360). But, again, it may not be relevant for this issue. So, at this stage I'm considering downgrading to the previous version of the driver (260.19.44). Before doing that, however, I thought to check for configuring options I may have missed.

Summary of HW/SW:
Model: Dell Precision M65
CPU: Intel Core2 CPU T7200 @ 2.00GHz
Graphic Card: nVidia Quadro FX 350M
Driver: NVIDIA 270.41.06
OS: Linux 2.6.37.6-0.5-desktop i686 [openSUSE 11.4 (i586)] + KDE 4.6.00 (4.6.0) "release 6"

The problem started with:
Driver: NVIDIA 260.19.44
OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5
and were absent with:
Driver: NVIDIA 260.19.44
OS: Linux 2.6.31.14-0.8.1-desktop i586 [openSUSE 11.2 (i586)] + KDE 4.3.5

View 5 Replies View Related

OpenSUSE Hardware :: Install Nvidia Driver Using Dkms?

Jul 5, 2011

dkms is a facility which lets you to install drivers as module and it'll compatible with kernel upgrade.Driver will live as its source code in system,so after each kernel upgrade , driver module will recompile itself to work properly with new kernel.I read about dkms , but I have no experience to configure it by myself. I want to install nvidia driver using dkms,but I don't know how and where I can find source code of nvidia driver.

View 2 Replies View Related

OpenSUSE Install :: Unable To Use The YaNDP Yet Another Nvidia Driver

Feb 16, 2010

I installed openSuSE 11.2 three days ago, the first time, and have been trying to get the nvidia video driver to work ever since. So far, no luck. I have a dual-boot system with Windows 2k (legacy programs) and the graphics card works fine there, so the problem isn't hardware related. The nv driver also works under 11.2, but not well.The graphics card is a GeForce 6200, and the computer is an old Tyan Thunder S2885 with dual Opteron processors. I'm in 64 bit mode for the Linux install.

I've tried installing the video drivers by:Doing a fresh install, loading in the nvidia repository, then doing online update. The two nvidia drivers were loaded (nvidia-gfxG02-kmp-desktop and x11-video-nvidiaG02), but when I tried to reboot I end up with a blank screen and no sync to the monitor (Hitachi SuperScan Elite 751 CRT type). Rebooting in safe mode brings up the nv driver, which works. Doing a fresh install, doing online update,then loading in the nvidia repository, refreshing it, and installing the same two RPMs . . . with the same result. Doing a fresh install and using the "one click" install from this web site. Same result.

Doing a fresh install, doing online update, selecting the pattern "Linux Kernel Development" and installing it, downloading the Nvidia installer NVIDIA-Linux-x86_64-190.53-pkg2.run and installing it. Same result.

Same as above, but then using Sax2 -r -m 0=nvidia, even though Sax is depreciated. Same result. I've tried modprobe nvidia. Nothing. Over the last two days I've probably tried several other iterations as well, and forgot them, but nothing worked, it's always the same result.

Another weirdness, when I have YaST do "Hardware Information" it has no trouble identifying the monitor a getting it's info, but when I click the Display icon on the panel it tells me that it can't identify the monitor.

Here's the basic system info:

Code:

Directory: /home/BillyDoc/Desktop
Tue Feb 16 09:21:23 CST 2010
BillyDoc@linux-k7w3:~/Desktop> lsmod | grep nvidia
nvidia 9647368 0
BillyDoc@linux-k7w3:~/Desktop> su

[code]....

I'm definitely a novice to this sort of thing, and at this point I haven't a clue what's going on. It looks like the nvidia driver get's installed alright, but X simply doesn't know it's there. Oh, and another thing. When I go into YaST to look for the "Graphics Card and Monitor" program . it's missing! I assume this is because Sax is depreciated, but what's the substitute?

View 9 Replies View Related

OpenSUSE Install :: Messed Up NVidia Driver After Upgrade

Jul 26, 2010

I did an upgrade of Nvidia(Latest version v.196) and KDE-base4 to KDE 4.4.4(I think) in Yast2. Now when I reboot the X doesnt start. I claim it can't find any nvidia-module. I thing the upgrade of Nvidia v.196 failed, so I need to know how to reinstall Nvidia in console(CLI). It only boot up in cli. I thought it is so simple to just download the latest driver and install in CLI, but my NetworkManager doesnt start eighter so I don't have any network.

OpenSUSE 11.2 64bits
KDE 4.4.x
Nvidia NV140 Quadro 512MB

I guess my mistake was to upgrade both KDE and Nvidia in the same operation.

View 4 Replies View Related

OpenSUSE Install :: NVIDIA Driver Slows X And KDE Start?

Apr 19, 2011

I have recently installed openSUSE 11.4 x86_64 on my laptop, with NVIDIA driver (260.19.44,Geforce 9300M GS).Performance is good, but it slows the boot process: The NVidia logo appears and stays on the screen for 10 seconds aproximately.KDE start is very slow also. I have tried to fix it by adding nomodeset to menu.lst and settting sysconfig variable NO_KMS_IN_INITRD to yes,with no success.

View 9 Replies View Related

OpenSUSE Install :: No More Display After Nvidia Driver Update?

Aug 9, 2011

This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...

Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!

View 9 Replies View Related

OpenSUSE :: Post The Version Of Nvidia Card That Fails With The 260.xx Driver

Feb 8, 2011

Many people are having trouble with the latest nvidia drivers. I think there might be a pattern and that might lead to a solution; even if that solution is "give up with that card you're using." So, here's the first:

7600GS PCI with 32 bit opensuse 11.3 and KDE 4.6

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved