Software :: Distro Which Supports Gnome And NVidia GeForce 9600?

Jul 21, 2011

Can anyone recommend a good fairly current distro which provides Gnome and well-supports an Nvidia Geforce 9600 GSO card? It appears the current versions of Ubuntu 10.10 and Linux Mint 11 do not, meaning they are now useless to me.

View 4 Replies


ADVERTISEMENT

OpenSUSE Install :: XEN Kernel Wont Boot With GeForce 9600 GT

Nov 29, 2009

I installed Opesuse 11.2 and I manged to install the Nvidia driver and it works fine. Then I enabled the Compiz and it works fine. During the Opensuse 11.2 installation I installed the XEN becuase I wanted to run multipile XEN guest, I have Nividi GeForce 9600 GT and I have 8 G of RAM and 1.5 TB.

When I decided to boot from XEN mode, it do not boot and it went to the terminal, I logged in I tried to install the Nivid driver in XEN mood and I wan in the init 3, it says:

The NVIDIA driver does not currently work on Xen kernels. If you are using a stock distribution kernel, please install a variant of this kernel without Xen support; if this is a
custom kernel, please install a standard Linux kernel. Then try installing the NVIDIA kernel module again.

I tried with the following Nvidia Driver;

After installing the above driver in normal kernel (non XEN kernel), it works fine but as soon as I boot to the XEN mode it just goes the terminal.

Kernel info:

The X11 fiel :

It must be some wrong with my installation or is there any patch for that.

View 4 Replies View Related

Fedora Hardware :: 15 Nvidia GeForce Go 7400 Gnome 3 Shell Hang On Login

Jul 12, 2011

I've seen a lot of posts related to problems with GNOME 3 shell and nvidia drivers but I have yet to find anything that seems to fix my problem. At this point, the laptop, a Dell D850, boots just fine all the way to the gdm login screen. When I log in, the background and menus initialize and the mouse can be moved around, but nothing works---I can't click on anything, Alt-F1 does nothing, and I have to switch to a VT and shut-down X. I've uninstalled all things nvidia and now I have a working laptop, so long as I use Classic with Compiz.

I upgraded two other hosts, but both had ATI graphics cards; they worked without a hitch. I'm regretting having decided to upgrade this laptop

View 2 Replies View Related

OpenSUSE Hardware :: NVIDIA Driver From NVIDIA Repository Supports Cuda?

Jul 29, 2010

Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?

View 2 Replies View Related

General :: Best LXDE Based Distro/distro That Supports LXDE?

Dec 15, 2010

Lubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed. I do like Chromium on Lubuntu though... its faster and a nice touch. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs).

LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc)64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit.

View 4 Replies View Related

Fedora Installation :: Nvidia 9600 GT - After Rebooting The Screen Turns Gibberish - Totally Unreadable

Apr 18, 2009

I just downloaded Fedora 10, burned the CD, installed the program, etc. Everything went just fine, but after rebooting the screen turns gibberish, totally unreadable. I now it's the video card, NVIDIA but how do I fix it? I installed Fedora 8 which worked just great, no issues. My machine is Intel Core 2 7300, Geforce 9600GT my other machine, is AMD-64 5000, Geforce 9500 GT, same problem happens when trying to install Centos 5.

View 5 Replies View Related

General :: Distro With Diskettes For Floppy Boot Setup That Supports USB

Mar 15, 2011

Situation- Laptop (2003 made Toshiba 2410) with dead secondary controller, so no CDDVD drive, BIOS does not support any form of booting from USB. Laptop has working floppy (had to repair it) distros that are good for older units like that that also support booting from diskettes, and then can mount and install from a USB CDDVD rom drive.

View 7 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

General :: Version Of Fedora That Supports Nvidia Riva Tnt Display Adapter?

Aug 12, 2010

I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.

DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15

CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock

I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.

The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.

I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen

At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.

View 8 Replies View Related

Red Hat :: 5.4 Not Compatible With NVIDIA GEFORCE GO 7600

Aug 14, 2010

I am trying for Redhat certification on RHEL 5.4. When i tried to install it on my Acer laptop with NVIDIA GEFORCE GO 7600, I was only able to install it in CUI mode and no GUI. From NVIDIA website I tried both the newest and oldest version they have for Linux, which is with .run extension. I tried installing it using sh <drivername.run> and it is starting the wizard, but exiting abruptly, with a kernel error.

How to work around on this issue? Any generic driver that would work for this display adaptor? whether version 5.5 would work with this card?

View 12 Replies View Related

Fedora :: Nvidia Geforce Go 7400 Cannot Enable On 12

Mar 8, 2010

i using sony vaio sz440 t5500 and installed fedora 12,but it cannot enable 3D on fc 12

Code:
lspci | less
01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1)

View 4 Replies View Related

Ubuntu :: Unable To Get Any Video Using Nvidia Geforce GT 240?

Jan 18, 2011

Built a custom pc using a Gigabyte mobo and amd processor. Mobo has onboard video. Ubuntu Maverick installs fine using on board video but when I put in the Nvidia Geforce GT 240 I get either no video or scrambled video. I've tried disabling the on board video and still no luck. I've also tried to install nvidia drivers first, and will get it to work but video is not crisp and will not show all of the screen.

View 4 Replies View Related

Ubuntu :: Installing NVIDIA GeForce GT430?

Aug 9, 2011

i wanna learn so much of it as much as I do in Windows System. I have downloaded the video driver but when I installed it in Terminal some error occured after i press the enter key..

You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL].. is someone know how to solve this issue?

View 2 Replies View Related

Hardware :: NVIDIA Geforce 7050 Compatible ?

Apr 30, 2010

I purchased a new computer and I am trying to boot up gparted to partition the HD for installing my Linux Distros, but it gives the famous error Quote:

input signal out of range. So I tried booting up some other live cd's, some give the same error as above and some tell me that the resolution or refresh rate in wrong. Of course using a live cd I have no control over that. I also tried three different monitors that have run Linux just fine on other computers.

My only thought that I could come up with is the NVIDIA Geforce 7050 graphics is not compatible with Linux. Can anyone confirm this ? Or is there something else I can try ?

View 14 Replies View Related

Hardware :: NVidia GeForce G 310M Support ?

Feb 13, 2011

I am thinking of buying a Lenovo IdeaPad Z360, it has a GeForce G 310M.

I can't find much info on Linux support but an Ubuntu thread seems to suggest it isn't good. Can someone confirm that this card works with the latest nVidia drivers on Linux (Arch in particular)? It'd be even better if you had the Ideapad Z360 and could report on any other hardware problems I might have?

NVidia seems to say they have support (listed without the G however), but I've heard conflicting reports and so would like to check.

EDIT: I also found these:

[url]

[url]

Does the Z360 have optimus and the Z560 not so? I can't detect that either of them have it but occasionaly, someone says that they do. Can anyone confirm this? I thought the only real difference was the screen size.

View 5 Replies View Related

Hardware :: Nvidia GeForce 8400 GS Not Recognized?

Mar 17, 2011

I am trying to build a linux box from an old Dell Optiplex GX240 that I got for free. I have gone out and bought a Sparkle Nvidia GsForce 8400 GS PCI video card for it but am having trouble getting it installed properly. It seems that the card is not recognized by the computer. The command lspci shows no signs of the new video card. I have installed the lastest Nvidia driver (huge PITA) but as expected this did not change the fact that the computer cannot see the new card. The card is rated for 350W and I have a 500W power supply so I should be good there. I have also changed the BIOS settings to auto detect the video card instead of just the stock one. Is my card simply incompatible with my motherboard or are there ways to get this card to work?

View 8 Replies View Related

General :: Nvidia GeForce 8500 GT Bad Setting?

Jun 7, 2010

I've installed Debian (Lenny) on my pc, with geForce 8500 GT, two monitor (LCD + CRT). i've correctly installed the driver i can enter in the nvidia's setup but:

1) the best resolution for my CRT (Sony Brillance 109P) is 640x480

2) video on LCD (LG Flatron L222WS) is no good bat I can setting different resolution
3) I can't save the XConfig cause i don't understand what permission I must have for writing on 'etc' folder

View 6 Replies View Related

General :: Xserver Versus Nvidia Geforce Mx 440

Jun 17, 2011

just installed slackware 13.37... i did a bit of configuration by myself but im having trouble making my graphics card running correctly under X.I installed the latest drivers correctly from the nvidia website.

Here's the lspci:

Quote:

00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)

[code]....

Right now with this .conf im able to start up X but find it not accelerated...

View 22 Replies View Related

Fedora Installation :: NVIDIA GeForce 9300m GS Compatability?

Feb 19, 2009

Forgive me if this was already posted but I couldn't find it. I am attempting to install F10 on my Acer Aspier 8730-6031, but I have video drive compatibility issues with my 9300m. Does anyone know of any drivers for this card or any fixes?

View 2 Replies View Related

Fedora :: Updating Nvidia Geforce 6800 Drivers?

Mar 25, 2010

I want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.

View 1 Replies View Related

Fedora Hardware :: NVIDIA 195.36.24 Does Not Work With GeForce GTX280 On F13

May 28, 2010

I just installed F13, congrats to the community for the awesome work - everything worked straight out of the box .

Unfortunately, I need to install the proprietary NVIDIA driver for my job (CUDA stuff). I first installed F13 + kmod-nvidia from Fusion on a machine with a GeForce 7200GS, and everything works ok (after turning nouveau off).

Then, I proceeded to update another machine featuring a GeForce GTX280 (again, nouveau blacklisted). The install was apparently successful, but X turned out to be extremely unstable and always crashes a few seconds into the session, either by leaving a blinking screen or by causing the machine to reboot. Thinking that some file might have ended up corrupted, I reinstalled F13 and tried nvidia-graphics from ATrpms. The result was the same: computer hanging a few seconds into the X session. Finally, I installed from the NVIDIA sh package, and again same outcome .

The card is most likely ok because I ran it with F10 till yesterday flawlessly, so I can only guess that it is the new version of the driver coming broken from NVIDIA. I tried installing version 185.18.36 but it cannot figure out the version of my kernel headers, and the legacy versions available from the repos do not support the GTX 280, so I cannot be positive about version 195.36.24 being bugged.

Both machines are x86_64 (a Phenom II and a Core i7). Especially, does anyone know how I could get version 185.18.36 to run on F13?

View 14 Replies View Related

OpenSUSE Hardware :: Installing Nvidia Drivers GeForce 210 In 11.4?

May 2, 2011

I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute

Code:

/etc/bin/nvidia-xconfig

The article SDB:NVIDIA the hard way results in the following error (copied from the error log):

Code:

ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.

Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.

View 9 Replies View Related

Ubuntu :: Downloaded Drivers For Nvidia Geforce 9400gt?

Jan 8, 2010

I downloaded drivers for my nvidia geforce 9400gt for linux, ran it in terminal and it said failed because i have to run it as root. how do i go about doing so?

View 8 Replies View Related

Ubuntu Installation :: NVidia GeForce 310M Support

Jan 28, 2010

I recently bought a sony vaio laptop, with nVidia GeForce 310M device.

I am new, and not very good with ubuntu. I downloaded a driver version 185, and installed, after installing which, I could not get any display at all. After trying to repair, in vain, I had to reinnstall the whole system.

I really need the correct drivers. I can see a version 190.42 of nvidia drivers, but that doesnt list my device model number, and so im not sure, whether this should work. Someone, also please tell me how do I repair, if I mess while trying this driver out?

View 9 Replies View Related

Ubuntu Multimedia :: 10.04 And Nvidia GeForce 210 - Cannot Recognize The Card

May 6, 2010

I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.

If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.

View 3 Replies View Related

Ubuntu / Apple :: Compiz On EMac G4 With NVIDIA GeForce 2 MX?

Aug 16, 2010

How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.

View 4 Replies View Related

Ubuntu Installation :: What Are Best Drivers For Nvidia GeForce 8800 GTS

Oct 20, 2010

What are the best drivers for Nvidia GeForce 8800 GTS. I'm not 100% sure, but I heard the newest drivers have buggs and aren't 100% compatible with 10.10. I was wondering what the best version of Nvidia drivers would be to install on 10.10? apt-get install?

View 1 Replies View Related

Ubuntu :: Nvidia GeForce 6150SE NForce W/ Natty?

May 1, 2011

I first started having problems on 10.10 a few days ago. Just boots to a command prompt. After troubleshooting, I found when I remove xorg.conf gnome starts up. Under System>Preferences>Monitors shows my correct Monitor model and resolution.

The resolution displays properly, 1680x1050, but without Nvidia and Graphic acceleration, I can't run my Compiz effects or XBMC. I'm having the exact same issues with 11.04. I ran nvidia-xconfig as root to get an auto gen xorg.conf. No change. GeForce 6150SE nForce 430 integrated graphics card

[Code]...

View 7 Replies View Related

Ubuntu Multimedia :: No HDMI Output On 11.04 NVidia GeForce GTX 465?

Jul 30, 2011

I've seen a lot of threads on this issue and combed through most of them trying to diagnose my problem and I've gotten REALLY close but with no complete success yet.I have a nVidia GeForce GTX 465 and I'm running HDMI out to my monitor. I have video but no audio. I can see the device in the Hardware tab of Sound Preferences but for the life of me I can't get it to play any audio (aside from testing with white noise).Output from aplay -l:

Code:
*** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]

[code]....

View 2 Replies View Related

Debian :: Nvidia GeForce 7050 Not Working In Lenny?

Mar 7, 2010

I just did a fresh install of Debian lenny and I'm having an issue with the display driver. The system is defaulting to 1600x1200 and it's not allowing me to change it to a lower resolution. The PC has a Nvidia geForce 7050 display card and the monitor I bought with the machine goes up to 1366x768 resolution. I ran the dpkg-reconfigure xserver-xorg but nothing happens, it's only giving me options to change the keyboard. There is nothing on the xorg.conf for the monitor settings:

Seletion "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"

Apparently, the install did not picked up the display card automatically. I also looked up the drivers for the adapter and downloaded the nvidia-glx_173.14.09-5_i386.deb file but, don't know how to install it.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved