When we expect a new rpm from current 195.36.15 nvidia driver? And if it is possible someone to get my a link to this rpm,build for my. like step by step "How to build rpm from nvidia source driver.All this is because i don`t like to install after every update!
View 1 Repliesi would like to install the newest nvidia driver NVIDIA-Linux-x86-280.13 on my Suse 11.1 with kernel. kernel-pae-2.6.27.56-0.1.1
however the nvidia driver installer claims that kernel source and devel are missing and I don' know how to get and install them for this kernel.
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
When trying to install the nvidia graphics driver I get the following error-message:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?
I have used the NVidia proprietary drivers for awhile. Yes, I know about nv and I even know about the prepackaged ones, but I've never minded getting the latest from NVidia, dropping out of X, and running the install which automatically rebuilds everything.
I recently took the synaptic update to 2.6.32-24. It worked fine and -- I guess -- migrated my driver. I didn't think about it. For no particular reason today I tried to build the latest NVIDIA driver (256.53 -- had been on an earlier 256 series). The build failed with some conftest failures. Even trying to rebuild the working driver failed. Reverting to 2.6.32-23 allowed both to be built and they work. So something the NVIDIA installer is expecting headerwise must be different between 2.6.32-23 and -24.
I have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/2.6.37.6-smp/source and .../build links to /usr/src/linux-2.6.37.6-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
View 6 Replies View RelatedSo after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
[Code]....
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedThere is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[Code]...
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I'm new to linux and recently installed openSUSE 11.1 on my Lenovo Thinkpad SL500. So far it's great... only problem is the hotkeys and brightness control don't work. Digging around online I found this "experimental" driver that purportedly works fine, but I have no idea how to compile, install, or otherwise use it. Here... tetromino's lenovo-sl-laptop at master - GitHub I'm not sure what to do with the makefile and C file provided. For example, what do I do with this instruction...
"To enable the brightness control, load the module with the "control_backlight=1" module parameter (i.e. insmod lenovo-sl-laptop.ko control_backlight=1 )" I know someone on here will be able to explain how to do this in a "computer engineering for chemists" language! I'm comfortable enough working in the terminal with commands, but have found no real straightforward explanation of how to do so (only "programming" experience is MATLAB m file writing).
I need a newer version of the nvidia drivers for opensuse 11.4. ftp://download.nvidia.com/opensuse/11.4 has version 270.41.06 available, but I found that I need the 270.41.19 version for CUDA 4.0 to run (yes I know CUDA 4.0 does not officially support 11.4, but the same 270.41.06 is available for 11.2 which CUDA 4.0 does support).
Where can I download the files x11-video-nvidiaG02-270.41.06-5.1.nosrc.rpm and nvidia-gfxG02-270.41.06-4.1.nosrc.rpm that these binaries were created from? Once I have the source rpms, I can easily update them to the newer version.
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
I tried it on my machine, just for lols, and was surprised at the result. I have nVidia driver 195.22 installed the "hard" way (We really should stop calling it that, it is simple pimples!) but:
Code:
Or leave them alone?
Code:
Code:
Code:
I'm setting up Suse 11.2 on PC w/ an Nvidia GT 240. I used the 1-click installation, found it didn't work, then discovered this thread saying the 240 requires the newest beta driver, 195.30, which is not available yet in 1-click and has to be manually installed.
However, that driver is no longer available on Nvidia's download site, either through their menu or the direct link given in the forum thread:
Unix Drivers Portal Page [URL]
Nor do I see it in the Nvidia repository.
why it was removed? Is there a major problem with it? If not, any idea how I can get it?
And if I can find an install it, I assume I need to first uninstall the 1-click version?
nvidia-gfxG02-kmp-desktop (190.53_2.6.31.5_0.1-8.1 (x86-64)
x11-video-nvidiaG02 (190.53-9.1 (x86-64)
Installs the "hard way " without problems Games run quicker rendering is better Video card hier is EVGA 9500GT 1gb ddr2 standard clocking Pcie bus overclocked to 110 mhz
Where to get : [URL].. The readme gives the documentation and which chips it support
I've got 11.3 going and I am mostly enjoying it. I was thrilled when I noticed that with KMS, I could see the boot process and the other vterms on my external monitor. Sadly, the nouveau driver doesn't seem to work for KWin/KDE compositing/desktop effects. Additionally, VDPAU was no go.
So, I set the nomodeset option for grub and chanked the KMS option in the sysconfig settings. The nvidia driver now works (along with composite/VDPAU stuff).
That being said... knowing I could have my external monitor work in those other areas of use is really bugging me.
I don't know much about KMS... is there any process (or if not, foreseeable future) where I could use KMS and the nvidia driver?
I get this error on enabling nVidia repo and downloading driver from YaST.
Code:
Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory
[code]....
Nvidia adress: [URL].. The new driver installed and no problems here this driver is better then the 260.19.04 with Sauerbraten and Nexzius a bit higher fps The readme gives all the cards for this driver to much to put here.
View 1 Replies View RelatedYou can get the 64 bit version 270.41.19 of the nVIDIA proprietary Video Driver from this link:[URL]..
And the new video driver from nVIDIA no longer is outputting any error message when it is installed as was the case with 270.41.6. So, it is worth a try I do believe to go with the new version. I have a bash script that can be helpful in installing this driver if you would like to use it. Read about lnvhw from here: LNVHW - Load NVIDIA (driver the) Hard Way from runlevel 3
I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.
HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".
After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).
If I launch konsole from a terminal, I receive the following warning:
konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.
Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.
The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+
I've got, from Nvidia, the 64bit driver for my card. After typing, sudo sh <filename>, I get, cc not in your path. What do I need to do, is this a C compiler? Isn't gcc already installed by default. I just installed OpenSUSE within the hour. Totally new to SUSE, and almost new to Linux. Just trying to give several distros a trial run.
View 6 Replies View Related* My Graphics card is a NVIDIA Geforce 7900 GTX. I am running OpenSUSE 11.2. I have attempted to install the Propriety NVIDIA Drivers (without success). I have added the repository to YAST, then proceeded to install the NVIDIA software.
I then proceeded to reboot my computer into "init 3" mode. I ran the nvidia-xconfig tool as described in the
openSUSE Graphic Card Practical Theory Guide for Users site I then proceeded to type "startx" and it failed to load.
when i trying to install NVIDIA drivers i get compile error:
NVIDIA: calling KBUILD...
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (
echo;
echo " ERROR: Kernel configuration is invalid.";
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing.";
[Code]...
I read over the installation instructions given here. However, they make reference to two versions: openSUSE 11.3-IA32 and openSUSE 11.3-AMD64. I have a 64-bit Intel system; are these instructions only for AMD chips, or do they refer to something else?
View 1 Replies View Related