when i trying to install NVIDIA drivers i get compile error:
NVIDIA: calling KBUILD...
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (
echo;
echo " ERROR: Kernel configuration is invalid.";
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing.";
[Code]...
When i'm trying to compile nvidia closed drivers, i got an error. I've tried binaries one on nvidia suse repo, but as i installed kernel 2.6.32-41 they didn't work. My laptop is a lenovo T61, with nvidia quadro nvs 140m, and intel chipset. And i'm trying to instal driver version NVIDIA-Linux-x86_64-100.14.11.
That's the error i get when executing nvidia-installer: Code: nvidia-installer log file '/var/log/nvidia-installer.log' creation time: Fri Feb 19 20:56:25 2010
[Code]...
I installed [URL] and everything mixed up! I tried to remove it and I get this error: Error while creating client module OneClickInstallUI My Graphic Card is NVidia Quadro FX
View 5 Replies View RelatedThe freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedAfter a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[Code]...
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
i have this error message after configuring nvidia graphic driver. there is one line that says FAILED, i pray somebody to explain to me what it means and solution.
Welcome to Fedora
Starting udev: [ OK ]
Setting hostname mikel: [ OK ]
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
[Code]...
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedI am running the newest Nvidia driver from nvidia.com, version 260.19.44. The built in proprietary Nvidia driver does not work properly.
Recently ubuntu was updated to a newer kernel 2.6.35.27 from 2.6.35.25. Under 2.6.35.25 the driver is working. Under 2.6.35.27 the desktop is not starting, and I can login to a 'console'. After login i try to run startx, and gets some errors. See attached Xorg.0.log.
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I installed kmod-nvidia-96xx-2.6.27.9-73.fc9.i686-96.43.09-1.fc9.6.i686 yesterday. After rebooting, the X server started correctly, but at the welcome login screen, my screen goes black for a bit whenever anything on the display changes. After logging in, the problem remains, plus my text is somewhat garbled.There are no error messages in /var/log/Xorg.0.log. The only error messages I could find were in /var/log/messages:
kernel: NVRM: Xid (0001:00): 8, Channel 00000000
kernel: NVRM: Xid (0001:00): 13, ...
kernel: NVRM: Xid (0001:00): 3, C ...
[code]....
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
I tried it on my machine, just for lols, and was surprised at the result. I have nVidia driver 195.22 installed the "hard" way (We really should stop calling it that, it is simple pimples!) but:
Code:
Or leave them alone?
Code:
Code:
Code:
I'm setting up Suse 11.2 on PC w/ an Nvidia GT 240. I used the 1-click installation, found it didn't work, then discovered this thread saying the 240 requires the newest beta driver, 195.30, which is not available yet in 1-click and has to be manually installed.
However, that driver is no longer available on Nvidia's download site, either through their menu or the direct link given in the forum thread:
Unix Drivers Portal Page [URL]
Nor do I see it in the Nvidia repository.
why it was removed? Is there a major problem with it? If not, any idea how I can get it?
And if I can find an install it, I assume I need to first uninstall the 1-click version?
nvidia-gfxG02-kmp-desktop (190.53_2.6.31.5_0.1-8.1 (x86-64)
x11-video-nvidiaG02 (190.53-9.1 (x86-64)
Installs the "hard way " without problems Games run quicker rendering is better Video card hier is EVGA 9500GT 1gb ddr2 standard clocking Pcie bus overclocked to 110 mhz
Where to get : [URL].. The readme gives the documentation and which chips it support
I've got 11.3 going and I am mostly enjoying it. I was thrilled when I noticed that with KMS, I could see the boot process and the other vterms on my external monitor. Sadly, the nouveau driver doesn't seem to work for KWin/KDE compositing/desktop effects. Additionally, VDPAU was no go.
So, I set the nomodeset option for grub and chanked the KMS option in the sysconfig settings. The nvidia driver now works (along with composite/VDPAU stuff).
That being said... knowing I could have my external monitor work in those other areas of use is really bugging me.
I don't know much about KMS... is there any process (or if not, foreseeable future) where I could use KMS and the nvidia driver?
I get this error on enabling nVidia repo and downloading driver from YaST.
Code:
Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory
[code]....
Nvidia adress: [URL].. The new driver installed and no problems here this driver is better then the 260.19.04 with Sauerbraten and Nexzius a bit higher fps The readme gives all the cards for this driver to much to put here.
View 1 Replies View RelatedYou can get the 64 bit version 270.41.19 of the nVIDIA proprietary Video Driver from this link:[URL]..
And the new video driver from nVIDIA no longer is outputting any error message when it is installed as was the case with 270.41.6. So, it is worth a try I do believe to go with the new version. I have a bash script that can be helpful in installing this driver if you would like to use it. Read about lnvhw from here: LNVHW - Load NVIDIA (driver the) Hard Way from runlevel 3
I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.
HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".
After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).
If I launch konsole from a terminal, I receive the following warning:
konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.
Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.
The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+